Research on the impact mechanism and parameter optimization of RTP structure layer fusion process
- 5 October 2024
- journal article
- research article
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 45 (3-4) , 747-764
Abstract
Fiber-reinforced thermoplastic composite pipes (RTP) possess a complex multilayer structure. Apart from the melting process of the reinforced layer, the melting process between the inner and outer layers and the reinforced layer is equally crucial. Factors such as heating time, heating temperature, and pipe diameter significantly influence the degree of tight bonding between these layers. The purpose of this study is to investigate the influence mechanism of the fusion process between the three main layers of RTP and to perform parameter optimization analysis. First, Box-Behnken response surface method and finite element analysis were used to obtain the softened layer thickness under different parameters and to couple the influence mechanism of process parameters on the softened layer thickness. Then, single parameter sensitivity analysis was used to reveal the influence mechanism of each parameter change on the softened layer thickness of the pipe, and then the coupling analysis of the process parameters was carried out. The analysis results show that the softened layer thickness is most sensitive to the change of heating temperature, followed by heating time and pipe diameter. Finally, the optimal parameter combination was obtained through the expected function method, and experiments were conducted on finished pipes.Keywords
Funding Information
- Science and Technology Plan Project of Jiangsu Province (BZ2022029)
- Qing Lan Project of the Higher Education Institutions of Jiangsu Province
- the Postgraduate Research & Practice Innovation Program of Jiangsu Province (SJCX24_2472)
This publication has 36 references indexed in Scilit:
- A Study on the Internal Pressure Bearing Performance of Glass-Fiber-Reinforced Polyethylene Composite PipesMechanics of Composite Materials, 2024
- Mathematical study of the mechanical properties of NOL rings with different winding process parametersComposites Science and Technology, 2024
- Transient thermomechanical axisymmetric analysis of multilayer thermoplastic composite pipesApplied Mathematical Modelling, 2023
- Mechanical Characterization and Optimum Design of Wound Glass-Fiber-Reinforced Polymer Pipes Based on the Winding Angle and the Number of PliesMechanics of Composite Materials, 2020
- Transient thermal analysis of multilayer pipeline with phase change materialApplied Thermal Engineering, 2020
- On The Stiffness Prediction of GFRP Pipes Subjected to Transverse LoadingKSCE Journal of Civil Engineering, 2018
- A desirability function method for optimizing mean and variability of multiple responses using a posterior preference articulation approachQuality and Reliability Engineering International, 2018
- Response surface methodology optimization of adsorptive desulfurization on nickel/activated carbonChemical Engineering Journal, 2017
- Lumped models for transient thermal analysis of multilayered composite pipeline with active heatingApplied Thermal Engineering, 2015
- Evaluation of burst strength of FW-FRP composite pipes after impact using pitch-based low-modulus carbon fiberComposites Part A: Applied Science and Manufacturing, 2006