Baby Nitin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Baby Nitin has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Pavitra Sandilya
Cryogenic Engineering Centre, Indian Institute of Technology Kharagpur
4 shared publications Goutam Chakraborty
3 shared publications- Goutam Chakraborty
Indian Institute of Technology Kharagpur, Kharagpur, India
1 shared publication - Sajikumar Pillai Sivasree
Department of Mechanical Engineering Saintgits College of Engineering Pathamuttom India
1 shared publication
Latest Publications
- 20 June 2024
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 102 (11) , 3867-3878
Optimal design of coolant jacket for cryogen transfer pipelines
Cryogenic liquids such as liquid oxygen and liquid hydrogen are extensively used in many processes and manufacturing industries. In these industries, transferring cryogens via pipelines is a routine phenomenon. As the boiling points and latent heat of cryogens are low, excessive vaporization of these cryogens is innate. Therefore, ensuring that the cryogen reaches the utility in its liquid form is challenging. In the case of liquid hydrogen and liquid helium, the pipelines are jacketed with a high boiling cryogen like nitrogen. The idea is to dump most of the heat into cheap nitrogen to limit the loss of precious hydrogen or helium. From a heat inleak point, maximizing the amount of nitrogen in the jacket is advantageous by choosing large cross‐sectional areas. Also, larger flow cross sections would lower pressure drops and, therefore, lower pumping costs. However, such a choice would add to the mass of the pipeline. An increase in the mass of the pipeline increases the need for better structural support of the pipeline assembly. Therefore, the design of cryogen jackets for limiting heat inleak is a multi‐objective optimization problem. In this work, we model the heat leak into the hydrogen via the nitrogen jacket and the pressure drop of liquid nitrogen, and we find the mass of the pipeline assembly. Then, we optimize the design of nitrogen jackets fitted over hydrogen pipelines. We employ the evolutionary optimization technique, genetic algorithm (GA), to perform this optimization.cryogen; genetic algorithm; heat inleak; liquid hydrogen; optimization.
- 20 June 2024
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 102 (11) , 3867-3878
Optimal design of coolant jacket for cryogen transfer pipelines
Cryogenic liquids such as liquid oxygen and liquid hydrogen are extensively used in many processes and manufacturing industries. In these industries, transferring cryogens via pipelines is a routine phenomenon. As the boiling points and latent heat of cryogens are low, excessive vaporization of these cryogens is innate. Therefore, ensuring that the cryogen reaches the utility in its liquid form is challenging. In the case of liquid hydrogen and liquid helium, the pipelines are jacketed with a high boiling cryogen like nitrogen. The idea is to dump most of the heat into cheap nitrogen to limit the loss of precious hydrogen or helium. From a heat inleak point, maximizing the amount of nitrogen in the jacket is advantageous by choosing large cross‐sectional areas. Also, larger flow cross sections would lower pressure drops and, therefore, lower pumping costs. However, such a choice would add to the mass of the pipeline. An increase in the mass of the pipeline increases the need for better structural support of the pipeline assembly. Therefore, the design of cryogen jackets for limiting heat inleak is a multi‐objective optimization problem. In this work, we model the heat leak into the hydrogen via the nitrogen jacket and the pressure drop of liquid nitrogen, and we find the mass of the pipeline assembly. Then, we optimize the design of nitrogen jackets fitted over hydrogen pipelines. We employ the evolutionary optimization technique, genetic algorithm (GA), to perform this optimization.cryogen; genetic algorithm; heat inleak; liquid hydrogen; optimization.
- 17 February 2023
- Published by Elsevier in International Journal of Refrigeration
- Vol. 150, 125-134
Experimental evidence of enhanced boil-off in isobaric mobile cryogenic vessels
- 17 February 2023
- Published by Elsevier in International Journal of Refrigeration
- Vol. 150, 125-134
Experimental evidence of enhanced boil-off in isobaric mobile cryogenic vessels
- Open Access
- 15 June 2022
- Published by Open Engineering Inc in engrXiv
Experimental evidence of enhanced boil-off in mobile cryogenic vessels
It has been postulated in the literature pertaining to the storage and transportation of cryogenic liquids that sloshing could intensify the boil-off of such liquids. However, there has been no experimental evidence in support of such postulations. Therefore, we undertook an experimental study to verify the postulation and found that the movement of the storage vessel does cause a significant increase in the boil-off. This finding will be of great help to the design engineers involved in the design and construction of storage vessels and mobile carriers. To the best of the authors’ knowledge, the results of this study are the first-ever proof that sloshing adds to the thermal energy over-and-above the heat inleak from the ambient, thereby causing a deterioration in the storability of the cryogenic liquids in mobile carriers. We found that the sloshing has to attain a threshold frequency before its effect on boil-off becomes significant; and above this frequency, the boil-off increases with an increase in the sloshing frequency. These findings would greatly help in bettering the design of vessels used for the storage and transport of cryogenic liquids; thus, reducing the loss of precious cryogenic liquid as well as the deleterious impact on the environment.
- 15 June 2022
- Published by Open Engineering Inc in engrXiv
Open AccessExperimental evidence of enhanced boil-off in mobile cryogenic vessels
It has been postulated in the literature pertaining to the storage and transportation of cryogenic liquids that sloshing could intensify the boil-off of such liquids. However, there has been no experimental evidence in support of such postulations. Therefore, we undertook an experimental study to verify the postulation and found that the movement of the storage vessel does cause a significant increase in the boil-off. This finding will be of great help to the design engineers involved in the design and construction of storage vessels and mobile carriers. To the best of the authors’ knowledge, the results of this study are the first-ever proof that sloshing adds to the thermal energy over-and-above the heat inleak from the ambient, thereby causing a deterioration in the storability of the cryogenic liquids in mobile carriers. We found that the sloshing has to attain a threshold frequency before its effect on boil-off becomes significant; and above this frequency, the boil-off increases with an increase in the sloshing frequency. These findings would greatly help in bettering the design of vessels used for the storage and transport of cryogenic liquids; thus, reducing the loss of precious cryogenic liquid as well as the deleterious impact on the environment.
- Open Access
- 22 April 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (10) , 24963-24974
Optimal design of a helical coil support for dewars in fuel cell applications
Fuel cells are gaining popularity because of their efficient energy production without causing environmental pollution. Recently, DRDO has developed a fuel cell-based air-independent propulsion (AIP) system. In this system, the hydrogen is produced onboard while oxygen is carried in liquefied form (LOX) from the land in specially designed insulated storage vessels called dewars. Such vessels are needed because LOX has a low boiling point (NBP ~ 90 K) and heat of vaporization (~ 213 kJ/kg), due to which it boils off easily even when there is a small amount of heat inleak from the ambient. A typical dewar consists of two vessels separated by insulation. Support members are used to hold the two vessels together. Heat inleak through the supports and the insulation of the dewar causes the boiling of LOX. The vessels are subjected to dynamic loads during the voyage due to the filling and consumption of LOX. Therefore, the support system should be designed to withstand the dynamic loads experienced by the dewar. While the support system should have enough mechanical strength to withstand the loads it is subjected to, it should also restrict the heat inleak from the ambient to minimize the LOX boil-off. To meet this requirement, we need to optimize the support system design. Design optimization of support systems is especially critical in submarines to reduce the snorkeling frequency. Even though the dewars are available commercially for various applications, their design methodologies are not available in the open literature. Cylindrical rods are generally used as support members. In earlier studies, the authors have shown that helical coils give better thermal performance than tension rods as dewar supports. These two support systems involve different design criteria. It is important to evolve an optimal design of the support system to maximize the mechanical strength of the support while minimizing the heat inleak through the support. In this paper, we present a design methodology for optimizing helical support. We have proposed a modified optimization technique derived from the classical genetic algorithm (GA) for this purpose. The modification has been done by ensuring the design feasibility of the coil at each step of the algorithm. The proposed optimization technique has been tested on a LOX dewar, and an optimal design of the helical coil support has been obtained.
- 22 April 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (10) , 24963-24974
Open AccessOptimal design of a helical coil support for dewars in fuel cell applications
Fuel cells are gaining popularity because of their efficient energy production without causing environmental pollution. Recently, DRDO has developed a fuel cell-based air-independent propulsion (AIP) system. In this system, the hydrogen is produced onboard while oxygen is carried in liquefied form (LOX) from the land in specially designed insulated storage vessels called dewars. Such vessels are needed because LOX has a low boiling point (NBP ~ 90 K) and heat of vaporization (~ 213 kJ/kg), due to which it boils off easily even when there is a small amount of heat inleak from the ambient. A typical dewar consists of two vessels separated by insulation. Support members are used to hold the two vessels together. Heat inleak through the supports and the insulation of the dewar causes the boiling of LOX. The vessels are subjected to dynamic loads during the voyage due to the filling and consumption of LOX. Therefore, the support system should be designed to withstand the dynamic loads experienced by the dewar. While the support system should have enough mechanical strength to withstand the loads it is subjected to, it should also restrict the heat inleak from the ambient to minimize the LOX boil-off. To meet this requirement, we need to optimize the support system design. Design optimization of support systems is especially critical in submarines to reduce the snorkeling frequency. Even though the dewars are available commercially for various applications, their design methodologies are not available in the open literature. Cylindrical rods are generally used as support members. In earlier studies, the authors have shown that helical coils give better thermal performance than tension rods as dewar supports. These two support systems involve different design criteria. It is important to evolve an optimal design of the support system to maximize the mechanical strength of the support while minimizing the heat inleak through the support. In this paper, we present a design methodology for optimizing helical support. We have proposed a modified optimization technique derived from the classical genetic algorithm (GA) for this purpose. The modification has been done by ensuring the design feasibility of the coil at each step of the algorithm. The proposed optimization technique has been tested on a LOX dewar, and an optimal design of the helical coil support has been obtained.
- 19 March 2022
- Published by Elsevier in International Communications in Heat and Mass Transfer
- Vol. 134
Revisiting the dewar design for liquid oxygen storage in fuel cell energy systems
- 19 March 2022
- Published by Elsevier in International Communications in Heat and Mass Transfer
- Vol. 134
Revisiting the dewar design for liquid oxygen storage in fuel cell energy systems