Yunlong Mao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yunlong Mao has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Si Li
Ocean College Jiangsu University of Science and Technology Zhenjiang Jiangsu China
9 shared publications - Atef. Z. Elsherbeni
Colorado School of Mines, Golden, CO, USA
3 shared publications - Wenxing Li
The College of Information and Communication Engineering, Harbin Engineering University, Harbin 150009, China
3 shared publications - Bin Yang
School of Cyberspace, Hangzhou Dianzi University, Hangzhou 310018, China
2 shared publications - Cheng Lyu
College of Information And Communication Engineering, Harbin Engineering University, Harbin 150000, China
2 shared publications - Yifan Shen
Ocean College Jiangsu University of Science and Technology, Jiangsu 212003, China
2 shared publications
Latest Publications
- Open Access
- 30 November 2025
- Published by River Publishers in Applied Computational Electromagnetics Society Journal (ACES)
A Miniaturized Dual-Band Circularly Polarized Antenna With Broadband and Flexible Frequency Ratio
A dual-band circularly polarized antenna with AR (Axial Ratio) bandwidth enhanced using parasitic strips and triangle notches is proposed in this paper. The proposed antenna comes with a size of 53×53×3.813 mm (0.64λg×0.64λg×0.046λg at 2.45 GHz), which is composed of two layers of substrate and three layers of metallic patterns. With the introduction of parasitic strips on the top metallic layer and etched triangles on the ground plane, this antenna exhibits dual-band circularly polarized character. A flexible frequency ratio from 1.57 to 2.01 could be obtained by changing the size of the triangle notches. Simulations and measurements verified that the proposed antenna shows relative S11<-10 dB bandwidth of 36.6% (2.23–3.25 GHz) and 51.3% (3.58–6.05 GHz), relative AR<3 dB bandwidth of 17.6% (2.32–2.77 GHz) and 11.1% (4.65–5.30 GHz), peak gains of 4.45 dBic and 6.24 dBic, respectively. This antenna is a good candidate for the 2.45 GHz communication band and the 5G sub-6 NR band applications.
- 30 November 2025
- Published by River Publishers in Applied Computational Electromagnetics Society Journal (ACES)
Open AccessA Miniaturized Dual-Band Circularly Polarized Antenna With Broadband and Flexible Frequency Ratio
A dual-band circularly polarized antenna with AR (Axial Ratio) bandwidth enhanced using parasitic strips and triangle notches is proposed in this paper. The proposed antenna comes with a size of 53×53×3.813 mm (0.64λg×0.64λg×0.046λg at 2.45 GHz), which is composed of two layers of substrate and three layers of metallic patterns. With the introduction of parasitic strips on the top metallic layer and etched triangles on the ground plane, this antenna exhibits dual-band circularly polarized character. A flexible frequency ratio from 1.57 to 2.01 could be obtained by changing the size of the triangle notches. Simulations and measurements verified that the proposed antenna shows relative S11<-10 dB bandwidth of 36.6% (2.23–3.25 GHz) and 51.3% (3.58–6.05 GHz), relative AR<3 dB bandwidth of 17.6% (2.32–2.77 GHz) and 11.1% (4.65–5.30 GHz), peak gains of 4.45 dBic and 6.24 dBic, respectively. This antenna is a good candidate for the 2.45 GHz communication band and the 5G sub-6 NR band applications.
- Open Access
- 30 October 2025
- Published by River Publishers in Applied Computational Electromagnetics Society Journal (ACES)
- p. 971–982
An Adaptive Multi-Objective Particle Swarm Optimization Algorithm for Excitation of Focused Phased Array in Microwave Hyperthermia Treatment Planning
A novel adaptive multi-objective particle swarm optimization (AMOPSO) is proposed to address the focus shift and redundant hotspots issues prevalent in current microwave hyperthermia treatment planning for breast cancer. By optimizing the excitation of phased array elements, more accurate beam focusing effect is achieved and the redundant hotspots are reduced, which significantly improves the treatment of breast cancer. The algorithm uses the difference between the optimized and target results as a feedback to self-constrain the algorithm, and introduces ratio of the peak power absorption (pPA) between the redundant hotspots and the target hotspot as a key objective function to reduce the number of redundant hotspots. Compared with the existing hyperthermia treatment planning (HTP) optimization algorithms, the proposed algorithm is capable of achieving precise focusing and a more substantial reduction in the number of redundant hotspots in a shorter computation time. Furthermore, the introduction of the pPA is capable of more effectively reducing the number of redundant hotspots and achieving a lower damage rate to healthy tissues.
- 30 October 2025
- Published by River Publishers in Applied Computational Electromagnetics Society Journal (ACES)
- p. 971–982
Open AccessAn Adaptive Multi-Objective Particle Swarm Optimization Algorithm for Excitation of Focused Phased Array in Microwave Hyperthermia Treatment Planning
A novel adaptive multi-objective particle swarm optimization (AMOPSO) is proposed to address the focus shift and redundant hotspots issues prevalent in current microwave hyperthermia treatment planning for breast cancer. By optimizing the excitation of phased array elements, more accurate beam focusing effect is achieved and the redundant hotspots are reduced, which significantly improves the treatment of breast cancer. The algorithm uses the difference between the optimized and target results as a feedback to self-constrain the algorithm, and introduces ratio of the peak power absorption (pPA) between the redundant hotspots and the target hotspot as a key objective function to reduce the number of redundant hotspots. Compared with the existing hyperthermia treatment planning (HTP) optimization algorithms, the proposed algorithm is capable of achieving precise focusing and a more substantial reduction in the number of redundant hotspots in a shorter computation time. Furthermore, the introduction of the pPA is capable of more effectively reducing the number of redundant hotspots and achieving a lower damage rate to healthy tissues.
- Open Access
- 27 March 2025
- Published by MDPI AG in Electronics
- Vol. 14 (7) , 1327
A Novel Two-Stage Superpixel CFAR Method Based on Truncated KDE Model for Target Detection in SAR Images
Target detection in synthetic aperture radar (SAR) imagery remains a significant technical challenge, particularly in scenarios involving multi-target interference and clutter edge effects that cannot be disregarded, notably in high-resolution imaging applications. To tackle this issue, a novel two-stage superpixel-level constant false-alarm rate (CFAR) detection method based on a truncated kernel density estimation (KDE) model is proposed in this article. The contribution mainly lies in three aspects. First, a truncated KDE model is used to fit the statistical distribution of clutter in the detection window, and adaptive thresholding is used for clutter truncation to remove outliers from the clutter samples while preserving the real clutter. Second, based on the clutter statistics, the KDE model is accurately constructed using the quartile based on the truncated clutter statistics. Third, target superpixel detection is performed using a two-stage CFAR detection scheme enhanced with local contrast measure (LCM), consisting of a global stage followed by a local stage. In the global detection phase, we identify candidate target superpixels (CTSs) based on the superpixel segmentation results. In the local detection phase, a local CFAR detector using a truncated KDE model is employed to improve the detection process, and further screening is performed on the global detection results combined with local contrast. Experimental results show that the proposed method achieves excellent detection performance, while significantly reducing detection time compared to current popular methods.
- 27 March 2025
- Published by MDPI AG in Electronics
- Vol. 14 (7) , 1327
Open AccessA Novel Two-Stage Superpixel CFAR Method Based on Truncated KDE Model for Target Detection in SAR Images
Target detection in synthetic aperture radar (SAR) imagery remains a significant technical challenge, particularly in scenarios involving multi-target interference and clutter edge effects that cannot be disregarded, notably in high-resolution imaging applications. To tackle this issue, a novel two-stage superpixel-level constant false-alarm rate (CFAR) detection method based on a truncated kernel density estimation (KDE) model is proposed in this article. The contribution mainly lies in three aspects. First, a truncated KDE model is used to fit the statistical distribution of clutter in the detection window, and adaptive thresholding is used for clutter truncation to remove outliers from the clutter samples while preserving the real clutter. Second, based on the clutter statistics, the KDE model is accurately constructed using the quartile based on the truncated clutter statistics. Third, target superpixel detection is performed using a two-stage CFAR detection scheme enhanced with local contrast measure (LCM), consisting of a global stage followed by a local stage. In the global detection phase, we identify candidate target superpixels (CTSs) based on the superpixel segmentation results. In the local detection phase, a local CFAR detector using a truncated KDE model is employed to improve the detection process, and further screening is performed on the global detection results combined with local contrast. Experimental results show that the proposed method achieves excellent detection performance, while significantly reducing detection time compared to current popular methods.
- 18 April 2024
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 66 (4)
A novel single‐layer dual‐band circularly polarized metasurface antenna for maritime communications
In this article, a novel single‐layer dual‐band circularly polarized (CP) metasurface antenna for maritime applications is proposed. The metasurface is composed of 4 × 4 hexagonal patches with two different sizes printed on one side of the low‐profile FR4 substrate, while a slot antenna is printed on the other side. A slit is etched in the middle of each hexagonal patch to enhance modal significance, forcing the current flows to be orthogonal to each other at different modes, generating CP waves as identified with characteristic modal analysis. The proposed antenna has been fabricated and measured. Simulated and measured results match well, of which the impedance bandwidth is 55.96% (4.8–8.53 GHz), 3 dB axial ratio bandwidth is 2.7% from 5.46 to 5.61 GHz with a maximum gain of 9.58 dBic and 8.2% from 7.86 to 8.53 GHz with a maximum gain of 9.02 dBic. The proposed antenna is structurally stable, and is applicable for maritime radio navigation and communication services.
- 18 April 2024
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 66 (4)
A novel single‐layer dual‐band circularly polarized metasurface antenna for maritime communications
In this article, a novel single‐layer dual‐band circularly polarized (CP) metasurface antenna for maritime applications is proposed. The metasurface is composed of 4 × 4 hexagonal patches with two different sizes printed on one side of the low‐profile FR4 substrate, while a slot antenna is printed on the other side. A slit is etched in the middle of each hexagonal patch to enhance modal significance, forcing the current flows to be orthogonal to each other at different modes, generating CP waves as identified with characteristic modal analysis. The proposed antenna has been fabricated and measured. Simulated and measured results match well, of which the impedance bandwidth is 55.96% (4.8–8.53 GHz), 3 dB axial ratio bandwidth is 2.7% from 5.46 to 5.61 GHz with a maximum gain of 9.58 dBic and 8.2% from 7.86 to 8.53 GHz with a maximum gain of 9.02 dBic. The proposed antenna is structurally stable, and is applicable for maritime radio navigation and communication services.
- Open Access
- 23 January 2024
- Published by Hindawi Limited in Journal of Sensors
- Vol. 2024, 1-17
A High Degree of Freedom Radiation Near-Field Source Localization Algorithm with Gain–Phase Error
The limitation of the number of estimable sources in the localization of radiation near-field sources with gainphase error is examined in this paper. When only the reference element has no gainphase error, a new method based on an accurate model is proposed to enhance the maximum number of estimable sources. Based on the location parameter details of the auxiliary source, the method first derives the gainphase error estimate matrix. Second, the source steering vector including errors is estimated using the total least square estimating signal parameter via rotational invariance techniques (TLS-ESPRIT), and the time-shifted data matrix is built utilizing the spacetime combination idea, thus increasing the degree of freedom of the array. Then, the source steering vector containing the error is modified by the error compensation matrix constructed according to the moment of gainphase error estimation. Finally, the estimated values of the source position parameters are obtained by using the closed formula of the gain phase of the modified source steering vector and the source position parameters. The experimental results show that the maximum estimable source number of the proposed algorithm is significantly improved compared with the previous results when only the reference array element has no gainphase error. When the array number is 5 and 9, the maximum estimable source number of the algorithm is 9 and 17, respectively.
- 23 January 2024
- Published by Hindawi Limited in Journal of Sensors
- Vol. 2024, 1-17
Open AccessA High Degree of Freedom Radiation Near-Field Source Localization Algorithm with Gain–Phase Error
The limitation of the number of estimable sources in the localization of radiation near-field sources with gainphase error is examined in this paper. When only the reference element has no gainphase error, a new method based on an accurate model is proposed to enhance the maximum number of estimable sources. Based on the location parameter details of the auxiliary source, the method first derives the gainphase error estimate matrix. Second, the source steering vector including errors is estimated using the total least square estimating signal parameter via rotational invariance techniques (TLS-ESPRIT), and the time-shifted data matrix is built utilizing the spacetime combination idea, thus increasing the degree of freedom of the array. Then, the source steering vector containing the error is modified by the error compensation matrix constructed according to the moment of gainphase error estimation. Finally, the estimated values of the source position parameters are obtained by using the closed formula of the gain phase of the modified source steering vector and the source position parameters. The experimental results show that the maximum estimable source number of the proposed algorithm is significantly improved compared with the previous results when only the reference array element has no gainphase error. When the array number is 5 and 9, the maximum estimable source number of the algorithm is 9 and 17, respectively.
- Open Access
- 5 May 2023
- Published by MDPI AG in Electronics
- Vol. 12 (9) , 2110
Radar Spectrum Image Classification Based on Deep Learning
With the continuous development and progress of science and technology, the increasingly complex electromagnetic environment and the research and development of new radar systems have led to the emergence of various radar signals. Traditional methods of radar emitter identification cannot meet the needs of current practical applications. For the purpose of classification and recognition of radar emitter signals, this paper proposes an improved EfficientNetv2-s classification method based on deep learning for more precise classification and recognition of radar radiation source signals. Using 16 different types of radar signal parameters from the signal parameter setting table, the proposed method generates random data sets consisting of spectrum images with varying amplitude. The proposed method replaces two-dimensional convolution in EfficientNetV2 with one-dimensional convolution. Additionally, the channel attention mechanism of the EfficientNetv2-s is optimized and modified to obtain attention weights without dimensional reduction, resulting in superior accuracy. Compared with other deep-learning image-classification methods, the test results of this method have better classification accuracy on the test set: the top1 accuracy reaches 98.12%, which is 0.17~3.12% higher than other methods. Furthermore, the proposed method has lower complexity compared to most methods.
- 5 May 2023
- Published by MDPI AG in Electronics
- Vol. 12 (9) , 2110
Open AccessRadar Spectrum Image Classification Based on Deep Learning
With the continuous development and progress of science and technology, the increasingly complex electromagnetic environment and the research and development of new radar systems have led to the emergence of various radar signals. Traditional methods of radar emitter identification cannot meet the needs of current practical applications. For the purpose of classification and recognition of radar emitter signals, this paper proposes an improved EfficientNetv2-s classification method based on deep learning for more precise classification and recognition of radar radiation source signals. Using 16 different types of radar signal parameters from the signal parameter setting table, the proposed method generates random data sets consisting of spectrum images with varying amplitude. The proposed method replaces two-dimensional convolution in EfficientNetV2 with one-dimensional convolution. Additionally, the channel attention mechanism of the EfficientNetv2-s is optimized and modified to obtain attention weights without dimensional reduction, resulting in superior accuracy. Compared with other deep-learning image-classification methods, the test results of this method have better classification accuracy on the test set: the top1 accuracy reaches 98.12%, which is 0.17~3.12% higher than other methods. Furthermore, the proposed method has lower complexity compared to most methods.
- Open Access
Design of Ultra-Wideband Phased Array Applicator for Breast Cancer Hyperthermia Therapy
Focused microwave−hyperthermia therapy has recently emerged as a key technology in the treatment of breast cancer due to non−invasive treatment. An applicator of a three−ring phased array consisting of ultra−wideband (UWB) microstrip antennas was designed for breast cancer therapy and operates at 0.915 GHz and 2.45 GHz. The proposed antenna has an ultra−wideband from 0.7 GHz to 5.5 GHz with resonant frequencies of 0.915 GHz and 2.45 GHz and dimensions of 15 × 43.5 × 1.575 mm3. The number of each ring was chosen to be 12 based on the SAR distribution and the performance indicators of tumor off−center focusing results for four different numbers of single−ring arrays. The homogeneous breast model is applied to a three−ring phased array consisting of 36 elements for focused simulation, and 1 cm3 and 2 cm3 tumors are placed in three different locations in the breast. The simulation results show that the proposed phased array has good performance and the capability to raise the temperature of different volumes of breast cancer above 42.5 °C after choosing a suitable operating frequency. The proposed applicator allows for precise treatment of tumors by selecting the appropriate operating frequency based on the size of the malignant tumor.
Open AccessDesign of Ultra-Wideband Phased Array Applicator for Breast Cancer Hyperthermia Therapy
Focused microwave−hyperthermia therapy has recently emerged as a key technology in the treatment of breast cancer due to non−invasive treatment. An applicator of a three−ring phased array consisting of ultra−wideband (UWB) microstrip antennas was designed for breast cancer therapy and operates at 0.915 GHz and 2.45 GHz. The proposed antenna has an ultra−wideband from 0.7 GHz to 5.5 GHz with resonant frequencies of 0.915 GHz and 2.45 GHz and dimensions of 15 × 43.5 × 1.575 mm3. The number of each ring was chosen to be 12 based on the SAR distribution and the performance indicators of tumor off−center focusing results for four different numbers of single−ring arrays. The homogeneous breast model is applied to a three−ring phased array consisting of 36 elements for focused simulation, and 1 cm3 and 2 cm3 tumors are placed in three different locations in the breast. The simulation results show that the proposed phased array has good performance and the capability to raise the temperature of different volumes of breast cancer above 42.5 °C after choosing a suitable operating frequency. The proposed applicator allows for precise treatment of tumors by selecting the appropriate operating frequency based on the size of the malignant tumor.
- Open Access
- 27 March 2022
- Published by Wiley in International Journal of Antennas and Propagation
- Vol. 2022, 1-9
Design and Analysis of a Metamaterial-Inspired Miniaturized Quadband Antenna
A metamaterial-inspired miniaturized quadband antenna is designed and discussed with a transmission line model to study the theory of miniaturization and multiband in this paper. A conventional printed monopole antenna is assumed as a primary antenna and then surrounded by an array of 4 × 2 interdigital LHMs. The proposed antenna has a compact size of , and operates at 2.40–2.55 GHz, 3.02–3.38 GHz, 5.04–5.52 GHz, and 7.08–7.38 GHz. Good gain and omnidirectional radiation patterns are observed in simulations and measurements. A simplified transmission line modal was established to study the reasons for miniaturization and multiband that were brought about by the LHM array. Related results verified the theoretical analysis and indicated that the proposed antenna is a good candidate for wireless communication applications.
- 27 March 2022
- Published by Wiley in International Journal of Antennas and Propagation
- Vol. 2022, 1-9
Open AccessDesign and Analysis of a Metamaterial-Inspired Miniaturized Quadband Antenna
A metamaterial-inspired miniaturized quadband antenna is designed and discussed with a transmission line model to study the theory of miniaturization and multiband in this paper. A conventional printed monopole antenna is assumed as a primary antenna and then surrounded by an array of 4 × 2 interdigital LHMs. The proposed antenna has a compact size of , and operates at 2.40–2.55 GHz, 3.02–3.38 GHz, 5.04–5.52 GHz, and 7.08–7.38 GHz. Good gain and omnidirectional radiation patterns are observed in simulations and measurements. A simplified transmission line modal was established to study the reasons for miniaturization and multiband that were brought about by the LHM array. Related results verified the theoretical analysis and indicated that the proposed antenna is a good candidate for wireless communication applications.
- 19 August 2021
- Published by River Publishers in Applied Computational Electromagnetics Society Journal (ACES)
- Vol. 36 (7) , 908-913
Robust Adaptive Beamforming based on Automatic Variable Loading in Array Antenna
Diagonal loading technology is widely used in array antenna beamforming because of its simple method, low computational complexity and the ability to improve the robustness of beamformer. On this basis, this paper proposes a robust adaptive beamforming method based on automatic variable loading technology. The automatic variable loading matrix (AVLM) of the method is composed of two parts. The non-uniform loading matrix dominants when the input signal-to-noise ratio (SNR) is small, effectively control the influence of noise disturbance without affecting the ability of array antenna to suppress interference. The variable diagonal loading matrix dominants when the input SNR is high to improve the output performance of array antenna. Simulated results show that compared to other methods, the proposed method has better output performance for both low and high input SNR cases.
- 19 August 2021
- Published by River Publishers in Applied Computational Electromagnetics Society Journal (ACES)
- Vol. 36 (7) , 908-913
Robust Adaptive Beamforming based on Automatic Variable Loading in Array Antenna
Diagonal loading technology is widely used in array antenna beamforming because of its simple method, low computational complexity and the ability to improve the robustness of beamformer. On this basis, this paper proposes a robust adaptive beamforming method based on automatic variable loading technology. The automatic variable loading matrix (AVLM) of the method is composed of two parts. The non-uniform loading matrix dominants when the input signal-to-noise ratio (SNR) is small, effectively control the influence of noise disturbance without affecting the ability of array antenna to suppress interference. The variable diagonal loading matrix dominants when the input SNR is high to improve the output performance of array antenna. Simulated results show that compared to other methods, the proposed method has better output performance for both low and high input SNR cases.