Gregory Bauw
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gregory Bauw has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Raphael Romary
Univ. Artois, UR 4025, Laboratoire Systèmes Électrotechniques et Environnement (LSEE)
4 shared publications - Bertrand Cassoret
Univ. Artois, UR 4025, Laboratoire Systmes Electrotechniques et Environnement (LSEE), Bthune, France
3 shared publications - Jean Le Besnerais
EOMYS ENGINEERING, Lille, France
2 shared publications - Olivier Ninet
Univ. Artois, UR 4025
2 shared publications - Sijie Ni
Dassault Systemes SE SIMULIA Vélizy-Villacoublay
2 shared publications Bertrand Cassoret
Béthune, France
1 shared publication
Latest Publications
- 3 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Amélioration des performances acoustiques et vibratoires des machines asynchrones par enroulement amortisseur
Ce travail présente une nouvelle technique permettant la réduction passive des bruits et vibrations d’origine magnétique des machines asynchrones triphasées grâce à un enroulement amortisseur connecté à des condensateurs. Les éléments nécessaires à la compréhension des phénomènes électromagnétiques, mécaniques et acoustiques, ainsi qu’un état de l’art des différentes techniques de réduction de bruit et vibrations sont d’abord donnés. Une partie de l’étude est ensuite consacrée au modèle de la machine asynchrone à enroulement amortisseur. Cette modélisation est basée sur le schéma monophasé équivalent de la machine et permet de mettre en évidence la réduction des harmoniques d’induction à l’origine des bruits et vibrations. Deux types de réduction de bruit sont décrits dans ce mémoire : celle du bruit provenant d’une alimentation de type M.L.I, d’une part, et du bruit provenant de phénomènes internes à la machine, d’autre part, comme les phénomènes d’encoches, la saturation ou l’excentricité. Pour chacun des deux cas, le schéma équivalent permettant de traduire le comportement de la machine est adapté et permet de choisir de manière optimale la valeur de condensateur à connecter à l’enroulement amortisseur. Une étude de dimensionnement permet également de discuter de l’impact de l’ajout de l’amortisseur sur l’encombrement, la masse et les performances de la machine. Des résultats expérimentaux montrent la validité et l’efficacité du système en termes de réduction des bruits et vibrations. La réduction du niveau de bruit global de la machine étudiée atteint 5dB(A) en alimentation réseau, et jusqu’à 10dB(A) en M.L.I.
- 3 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Amélioration des performances acoustiques et vibratoires des machines asynchrones par enroulement amortisseur
Ce travail présente une nouvelle technique permettant la réduction passive des bruits et vibrations d’origine magnétique des machines asynchrones triphasées grâce à un enroulement amortisseur connecté à des condensateurs. Les éléments nécessaires à la compréhension des phénomènes électromagnétiques, mécaniques et acoustiques, ainsi qu’un état de l’art des différentes techniques de réduction de bruit et vibrations sont d’abord donnés. Une partie de l’étude est ensuite consacrée au modèle de la machine asynchrone à enroulement amortisseur. Cette modélisation est basée sur le schéma monophasé équivalent de la machine et permet de mettre en évidence la réduction des harmoniques d’induction à l’origine des bruits et vibrations. Deux types de réduction de bruit sont décrits dans ce mémoire : celle du bruit provenant d’une alimentation de type M.L.I, d’une part, et du bruit provenant de phénomènes internes à la machine, d’autre part, comme les phénomènes d’encoches, la saturation ou l’excentricité. Pour chacun des deux cas, le schéma équivalent permettant de traduire le comportement de la machine est adapté et permet de choisir de manière optimale la valeur de condensateur à connecter à l’enroulement amortisseur. Une étude de dimensionnement permet également de discuter de l’impact de l’ajout de l’amortisseur sur l’encombrement, la masse et les performances de la machine. Des résultats expérimentaux montrent la validité et l’efficacité du système en termes de réduction des bruits et vibrations. La réduction du niveau de bruit global de la machine étudiée atteint 5dB(A) en alimentation réseau, et jusqu’à 10dB(A) en M.L.I.
- 17 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (10) , 11957-11966
Evaluation of Damper Winding Application in a PMSM Under Different Operating Conditions
This article investigates noise and vibrations of a permanent magnet synchronous machine (PMSM) integrated with a damper system under different load conditions. The damper system consisting of a three-phase auxiliary winding and external capacitors is designed to reduce electromagnetic noise and vibrations in Permanent Magnet Synchronous Machines (PMSMs). Capacitors are used to short-circuit a three-phase damper winding that is wound into the same slots as the stator winding. The effectiveness of the damper system in reducing noise and vibration is analyzed, and its impact is practically studied in this article. First, electromagnetic excitation due to pulsewidth modulation (PWM) supplies and corresponding noise and vibrations in PMSMs are presented. Then, the principle and installation of the damper system are explained in detail. The sideband harmonic reduction effect in a studied machine is predicted by numerical simulations. To verify the performance of the damper system to reduce noise and vibration and its impact under various operating conditions, experimental validation is performed on a load test bench. Overall, the damper system can effectively reduce electromagnetic noise and vibrations, but it needs to explore suitable operating conditions to minimize its negative effects.
- 17 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (10) , 11957-11966
Evaluation of Damper Winding Application in a PMSM Under Different Operating Conditions
This article investigates noise and vibrations of a permanent magnet synchronous machine (PMSM) integrated with a damper system under different load conditions. The damper system consisting of a three-phase auxiliary winding and external capacitors is designed to reduce electromagnetic noise and vibrations in Permanent Magnet Synchronous Machines (PMSMs). Capacitors are used to short-circuit a three-phase damper winding that is wound into the same slots as the stator winding. The effectiveness of the damper system in reducing noise and vibration is analyzed, and its impact is practically studied in this article. First, electromagnetic excitation due to pulsewidth modulation (PWM) supplies and corresponding noise and vibrations in PMSMs are presented. Then, the principle and installation of the damper system are explained in detail. The sideband harmonic reduction effect in a studied machine is predicted by numerical simulations. To verify the performance of the damper system to reduce noise and vibration and its impact under various operating conditions, experimental validation is performed on a load test bench. Overall, the damper system can effectively reduce electromagnetic noise and vibrations, but it needs to explore suitable operating conditions to minimize its negative effects.
- Open Access
Damper Winding for Noise and Vibration Reduction of a Permanent Magnet Synchronous Machine
In this paper, a passive method for the noise reduction of the PMSM (Permanent Magnet Synchronous Machine) is presented. The principle is to add an auxiliary three-phase winding into the same slots as the initial stator winding, short-circuited via three capacitors of suitable values. The aim is to create a damping effect for flux density harmonic components, especially high-frequency harmonics from the PWM (PulseWidth Modulation), in the air gap in order to reduce the noise and vibration of the PMSM. The method can significantly reduce the global sound pressure level and vibrations for specific frequencies. Because of passive features, the additional winding effectively mitigates magnetic noise without greatly increasing the complexity of design and manufacturing, which also extends its applicability to different PMSMs.
Open AccessDamper Winding for Noise and Vibration Reduction of a Permanent Magnet Synchronous Machine
In this paper, a passive method for the noise reduction of the PMSM (Permanent Magnet Synchronous Machine) is presented. The principle is to add an auxiliary three-phase winding into the same slots as the initial stator winding, short-circuited via three capacitors of suitable values. The aim is to create a damping effect for flux density harmonic components, especially high-frequency harmonics from the PWM (PulseWidth Modulation), in the air gap in order to reduce the noise and vibration of the PMSM. The method can significantly reduce the global sound pressure level and vibrations for specific frequencies. Because of passive features, the additional winding effectively mitigates magnetic noise without greatly increasing the complexity of design and manufacturing, which also extends its applicability to different PMSMs.
- 1 July 2019
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. 38 (4) , 1253-1262
Design of an induction machine with damper windings for noise and vibrations reduction
Purpose: The purpose of this paper is to present a design method for induction machines including a three-phase damper winding for noise and vibrations reduction. Design/methodology/approach: In the first part, the principle of the damper winding is recalled. The second part presents the iterative design method which is applied on a 4-kW pulse width modulation (PWM)-fed induction machine to study the impact of the additional winding on the geometry. In the third part, the finite-element method is used to validate the designed geometry and highlight the harmonic flux density reduction. Finally, some experimental results are given. Findings: The study shows that the impact of the additional three-phase winding on the geometry and weight of the machine is low. Moreover, the proposed noise reduction method allows one to reduce the total noise level of a PWM-fed induction machine up to 8.5 dBA. Originality/value: The originality of the paper concerns the design and characterization of a three-phase damper winding for a noiseless induction machine. The principle of this proposed noise reduction method is new and has been patented.
- 1 July 2019
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. 38 (4) , 1253-1262
Design of an induction machine with damper windings for noise and vibrations reduction
Purpose: The purpose of this paper is to present a design method for induction machines including a three-phase damper winding for noise and vibrations reduction. Design/methodology/approach: In the first part, the principle of the damper winding is recalled. The second part presents the iterative design method which is applied on a 4-kW pulse width modulation (PWM)-fed induction machine to study the impact of the additional winding on the geometry. In the third part, the finite-element method is used to validate the designed geometry and highlight the harmonic flux density reduction. Finally, some experimental results are given. Findings: The study shows that the impact of the additional three-phase winding on the geometry and weight of the machine is low. Moreover, the proposed noise reduction method allows one to reduce the total noise level of a PWM-fed induction machine up to 8.5 dBA. Originality/value: The originality of the paper concerns the design and characterization of a three-phase damper winding for a noiseless induction machine. The principle of this proposed noise reduction method is new and has been patented.
- 30 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 54 (5) , 4147-4155
Equivalent Circuit of PWM-Fed Induction Machine With Damper Winding for Noise and Vibration Reduction
This paper presents a system that enables the passive reduction of noise and vibrations in a three-phase induction machine with a stator damper winding connected to capacitors. This is a simple and effective system for reducing the flux density harmonics in an electrical machine. The theoretical study is based on the modeling of a machine equipped with the damper winding obtained from Kron's theory about equivalent circuits of electrical machinery. The analysis of the equivalent circuit allows one to identify possibilities to reduce the flux density harmonics responsible of unwanted noise and vibration components. Finally, an experimental validation is performed.
- 30 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 54 (5) , 4147-4155
Equivalent Circuit of PWM-Fed Induction Machine With Damper Winding for Noise and Vibration Reduction
This paper presents a system that enables the passive reduction of noise and vibrations in a three-phase induction machine with a stator damper winding connected to capacitors. This is a simple and effective system for reducing the flux density harmonics in an electrical machine. The theoretical study is based on the modeling of a machine equipped with the damper winding obtained from Kron's theory about equivalent circuits of electrical machinery. The analysis of the equivalent circuit allows one to identify possibilities to reduce the flux density harmonics responsible of unwanted noise and vibration components. Finally, an experimental validation is performed.