Takuzumi Nishio
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Takuzumi Nishio has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Moju Zhao
The University of Tokyo
13 shared publications - Kei Okada
The University of Tokyo
6 shared publications - Masayuki Inaba
Department of Mechano-Informatics, The University of Tokyo, Tokyo, Japan
6 shared publications - Junichiro Sugihara
The University of Tokyo
4 shared publications - Kazuki Sugihara
The University of Tokyo
3 shared publications - Keisuke Nagato
The University of Tokyo
3 shared publications
Latest Publications
- 23 May 2025
- Published by Taylor & Francis in Advanced Robotics
- Vol. 39 (11) , 647-662
GenAerialNav: obstacle avoidance in real flight for generalized multirotors by reinforcement learning with variable Acc-Properties in dynamics
- 23 May 2025
- Published by Taylor & Francis in Advanced Robotics
- Vol. 39 (11) , 647-662
GenAerialNav: obstacle avoidance in real flight for generalized multirotors by reinforcement learning with variable Acc-Properties in dynamics
- 18 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (5) , 3537-3547
BEATLE—Self-Reconfigurable Aerial Robot: Design, Control and Experimental Validation
Modular self-reconfigurable robots (MSRRs) offer enhanced task flexibility by constructing various structures suitable for each task. However, conventional terrestrial MSRRs equipped with wheels face critical challenges, including limitations in the size of constructible structures and system robustness due to elevated wrench loads applied to each module. In this work, we introduce an aerial MSRR (A-MSRR) system named BEnding-moment-free self-reconfigurable Aerial roboT moduLE (BEATLE), capable of merging and separating in-flight. BEATLE can merge without applying wrench loads to adjacent modules, thereby expanding the scalability and robustness of conventional terrestrial MSRRs. In this article, we propose a system configuration for BEATLE, including mechanical design, a control framework for multiconnected flight, and a motion planner for reconfiguration motion. The design of a docking mechanism and housing structure aims to balance the durability of the constructed structure with ease of separation. Furthermore, the proposed flight control framework achieves stable multiconnected flight based on contact wrench control. Moreover, the proposed motion planner based on a finite state machine achieves precise and robust reconfiguration motion. We also introduce the actual implementation of the prototype and validate the robustness and scalability of the proposed system design through experiments and simulation studies.
- 18 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 30 (5) , 3537-3547
BEATLE—Self-Reconfigurable Aerial Robot: Design, Control and Experimental Validation
Modular self-reconfigurable robots (MSRRs) offer enhanced task flexibility by constructing various structures suitable for each task. However, conventional terrestrial MSRRs equipped with wheels face critical challenges, including limitations in the size of constructible structures and system robustness due to elevated wrench loads applied to each module. In this work, we introduce an aerial MSRR (A-MSRR) system named BEnding-moment-free self-reconfigurable Aerial roboT moduLE (BEATLE), capable of merging and separating in-flight. BEATLE can merge without applying wrench loads to adjacent modules, thereby expanding the scalability and robustness of conventional terrestrial MSRRs. In this article, we propose a system configuration for BEATLE, including mechanical design, a control framework for multiconnected flight, and a motion planner for reconfiguration motion. The design of a docking mechanism and housing structure aims to balance the durability of the constructed structure with ease of separation. Furthermore, the proposed flight control framework achieves stable multiconnected flight based on contact wrench control. Moreover, the proposed motion planner based on a finite state machine achieves precise and robust reconfiguration motion. We also introduce the actual implementation of the prototype and validate the robustness and scalability of the proposed system design through experiments and simulation studies.
- 6 August 2024
- Published by Springer Nature
- p. 384-392
Singularity-Free Rotor-Distributed Manipulator
- Open Access
Design, Control, and Motion Strategy of TRADY: Tilted-Rotor-Equipped Aerial Robot With Autonomous In-Flight Assembly and Disassembly Ability
In previous research, various types of aerial robots were developed to improve maneuverability or manipulation abilities. However, there was a challenge in achieving both mobility and manipulation capabilities simultaneously. This is because aerial robots with high mobility lack the necessary rotors to perform manipulation tasks, while those with manipulation ability are too large to achieve high mobility. To address this issue, a new aerial robot called TRADY was introduced in this article. TRADY is a tilted-rotor-equipped aerial robot that can autonomously assemble and disassemble in-flight, allowing for a switch in control model between under-actuated and fully-actuated models. The system features a novel docking mechanism and optimized rotor configuration, as well as a control system that can transition between under-actuated and fully-actuated modes and compensate for discrete changes. Additionally, a new motion strategy for assembly/disassembly motion that includes recovery behavior from hazardous conditions was introduced. Experimental results showed that TRADY can successfully execute aerial assembly/disassembly motions with a 90% success rate and generate more than nine times the torque of a single unit in the assembly state. This is the first robot system capable of performing both assembly and disassembly while seamlessly transitioning between fully-actuated and under-actuated models.
Open AccessDesign, Control, and Motion Strategy of TRADY: Tilted-Rotor-Equipped Aerial Robot With Autonomous In-Flight Assembly and Disassembly Ability
In previous research, various types of aerial robots were developed to improve maneuverability or manipulation abilities. However, there was a challenge in achieving both mobility and manipulation capabilities simultaneously. This is because aerial robots with high mobility lack the necessary rotors to perform manipulation tasks, while those with manipulation ability are too large to achieve high mobility. To address this issue, a new aerial robot called TRADY was introduced in this article. TRADY is a tilted-rotor-equipped aerial robot that can autonomously assemble and disassemble in-flight, allowing for a switch in control model between under-actuated and fully-actuated models. The system features a novel docking mechanism and optimized rotor configuration, as well as a control system that can transition between under-actuated and fully-actuated modes and compensate for discrete changes. Additionally, a new motion strategy for assembly/disassembly motion that includes recovery behavior from hazardous conditions was introduced. Experimental results showed that TRADY can successfully execute aerial assembly/disassembly motions with a 90% success rate and generate more than nine times the torque of a single unit in the assembly state. This is the first robot system capable of performing both assembly and disassembly while seamlessly transitioning between fully-actuated and under-actuated models.
- 25 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (2) , 1460-1467
Singularity-Free Flight using Rotor-Distributed Aerial Manipulator
Aerial manipulators have been developed in recent years. The most popular type is the multirotor equipped with arms. By employing these rotor-concentrated manipulators (RCMs), various manipulations have been conducted in high places. Compared with RCMs, rotor-distributed manipulators (RDMs) can generate relatively larger wrenches at the end effector. However, certain types of singular configurations exist during flight. In this letter, we propose design and control methods for the RDM based on previous works [1]-[3]. Additionally, we propose a planning method for optimizing the angles of the thrust vectoring apparatus to overcome singularities and maximize controllability in arbitrary poses. Finally, we verify the feasibility of the proposed methods through experiments. By using a quad-rotor, we achieve stable flight in challenging poses, such as horizontal or vertical line configurations.
- 25 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (2) , 1460-1467
Singularity-Free Flight using Rotor-Distributed Aerial Manipulator
Aerial manipulators have been developed in recent years. The most popular type is the multirotor equipped with arms. By employing these rotor-concentrated manipulators (RCMs), various manipulations have been conducted in high places. Compared with RCMs, rotor-distributed manipulators (RDMs) can generate relatively larger wrenches at the end effector. However, certain types of singular configurations exist during flight. In this letter, we propose design and control methods for the RDM based on previous works [1]-[3]. Additionally, we propose a planning method for optimizing the angles of the thrust vectoring apparatus to overcome singularities and maximize controllability in arbitrary poses. Finally, we verify the feasibility of the proposed methods through experiments. By using a quad-rotor, we achieve stable flight in challenging poses, such as horizontal or vertical line configurations.
- 25 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 40 (15523098) , 660-676
Design, Control, and Motion Planning for a Root-Perching Rotor-Distributed Manipulator
Manipulation performance improvement is crucial for aerial robots. For aerial manipulators, the baselink position and attitude errors directly affect the precision at the end effector. To address this stability problem, fixed-body approaches such as perching on the environment using the rotor suction force are useful. Additionally, conventional arm-equipped multirotors, called rotor-concentrated manipulators, find it difficult to generate a large wrench at the end effector due to joint torque limitations. Using distributed rotors to each link, the thrust can support each link weight, decreasing the arm joints' torque. Based on this approach, rotor-distributed manipulators (RDMs) can increase feasible wrench and reachability of the end effector. This article introduces a minimal configuration of an RDM that can perch on surfaces, especially ceilings, using a part of their body. First, we design a minimal rotor-distributed arm considering the flight and end-effector performance. Second, a flight controller is proposed for this minimal RDM along with a perching controller adaptable for various types of aerial robots. Third, we propose a motion planning method based on inverse kinematics, considering specific constraints to the proposed RDMs, such as perching force. Finally, we evaluate flight and perching motions and confirm that the proposed manipulator can significantly improve the manipulation performance.
- 25 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 40 (15523098) , 660-676
Design, Control, and Motion Planning for a Root-Perching Rotor-Distributed Manipulator
Manipulation performance improvement is crucial for aerial robots. For aerial manipulators, the baselink position and attitude errors directly affect the precision at the end effector. To address this stability problem, fixed-body approaches such as perching on the environment using the rotor suction force are useful. Additionally, conventional arm-equipped multirotors, called rotor-concentrated manipulators, find it difficult to generate a large wrench at the end effector due to joint torque limitations. Using distributed rotors to each link, the thrust can support each link weight, decreasing the arm joints' torque. Based on this approach, rotor-distributed manipulators (RDMs) can increase feasible wrench and reachability of the end effector. This article introduces a minimal configuration of an RDM that can perch on surfaces, especially ceilings, using a part of their body. First, we design a minimal rotor-distributed arm considering the flight and end-effector performance. Second, a flight controller is proposed for this minimal RDM along with a perching controller adaptable for various types of aerial robots. Third, we propose a motion planning method based on inverse kinematics, considering specific constraints to the proposed RDMs, such as perching force. Finally, we evaluate flight and perching motions and confirm that the proposed manipulator can significantly improve the manipulation performance.
- Open Access
- 20 October 2023
- Published by Wiley in Advanced Intelligent Systems
- Vol. 5 (10)
Design, Control, and Motion Strategy of TRADY: Tilted‐Rotor‐Equipped Aerial Robot With Autonomous In‐Flight Assembly and Disassembly Ability
- 20 October 2023
- Published by Wiley in Advanced Intelligent Systems
- Vol. 5 (10)
Open AccessDesign, Control, and Motion Strategy of TRADY: Tilted‐Rotor‐Equipped Aerial Robot With Autonomous In‐Flight Assembly and Disassembly Ability
- Open Access
- 20 July 2023
- Published by Wiley in Advanced Intelligent Systems
- Vol. 5 (10)
Design, Control, and Motion Strategy of TRADY: Tilted‐Rotor‐Equipped Aerial Robot With Autonomous In‐Flight Assembly and Disassembly Ability
State‐of‐the‐art aerial robots often prioritize maneuverability or manipulation capabilities, making it difficult to achieve both. The issue arises because aerial robots with agile mobility lack sufficient rotors for manipulation tasks, while those with manipulation ability are too large for agile mobility. To tackle this problem, a novel aerial robot unit named TRADY, tilted‐rotor‐equipped aerial robot with autonomous in‐flight assembly and disassembly capability, is introduced. The TRADY unit can self‐assemble/disassemble with another unit in mid‐air, adjusting the aircraft's control freedom by switching between under‐actuated and fully‐actuated control models. The system implementation involves a docking mechanism design, optimized rotor configuration, as well as a control system with the ability to switch between under‐actuated and fully‐actuated controllers. A proposed state transition method compensates for discrete changes during the controller switchover process. Also, a motion strategy for assembly/disassembly with hazardous condition recovery behavior is presented. Finally, through experiments, TRADY demonstrated a 90 % success rate in executing assembly/disassembly motions, and in the assembly state, it can utilize full‐pose tracking and generate over nine times the torque of a single unit. This is the first aerial robot developed to perform both assembly and disassembly while seamlessly transitioning between fully‐actuated and under‐actuated models.
- 20 July 2023
- Published by Wiley in Advanced Intelligent Systems
- Vol. 5 (10)
Open AccessDesign, Control, and Motion Strategy of TRADY: Tilted‐Rotor‐Equipped Aerial Robot With Autonomous In‐Flight Assembly and Disassembly Ability
State‐of‐the‐art aerial robots often prioritize maneuverability or manipulation capabilities, making it difficult to achieve both. The issue arises because aerial robots with agile mobility lack sufficient rotors for manipulation tasks, while those with manipulation ability are too large for agile mobility. To tackle this problem, a novel aerial robot unit named TRADY, tilted‐rotor‐equipped aerial robot with autonomous in‐flight assembly and disassembly capability, is introduced. The TRADY unit can self‐assemble/disassemble with another unit in mid‐air, adjusting the aircraft's control freedom by switching between under‐actuated and fully‐actuated control models. The system implementation involves a docking mechanism design, optimized rotor configuration, as well as a control system with the ability to switch between under‐actuated and fully‐actuated controllers. A proposed state transition method compensates for discrete changes during the controller switchover process. Also, a motion strategy for assembly/disassembly with hazardous condition recovery behavior is presented. Finally, through experiments, TRADY demonstrated a 90 % success rate in executing assembly/disassembly motions, and in the assembly state, it can utilize full‐pose tracking and generate over nine times the torque of a single unit. This is the first aerial robot developed to perform both assembly and disassembly while seamlessly transitioning between fully‐actuated and under‐actuated models.
- 19 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 8 (9) , 5608-5615
Design and Control of a Small Humanoid Equipped With Flight Unit and Wheels for Multimodal Locomotion
Humanoids are versatile robotic platforms owing to their limbs with multiple degrees of freedom. Although humanoids can walk like humans, they are relatively slow, and cannot run over large barriers. To address these limitations, we aim to achieve rapid terrestrial locomotion ability and simultaneously expand the locomotion domain to the air by utilizing thrust for propulsion. In this letter, we first describe an optimized construction method for a humanoid robot equipped with wheels and a flight unit to achieve these abilities. Then, we describe the integrated control framework of the proposed flying humanoid for each locomotion mode: aerial, legged, and wheeled locomotion. Finally, we achieved multimodal locomotion and aerial manipulation experiments using the proposed robot platform. To the best of our knowledge, this is the first time that a single humanoid has simultaneously achieved three different types of locomotion, including flight.
- 19 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 8 (9) , 5608-5615
Design and Control of a Small Humanoid Equipped With Flight Unit and Wheels for Multimodal Locomotion
Humanoids are versatile robotic platforms owing to their limbs with multiple degrees of freedom. Although humanoids can walk like humans, they are relatively slow, and cannot run over large barriers. To address these limitations, we aim to achieve rapid terrestrial locomotion ability and simultaneously expand the locomotion domain to the air by utilizing thrust for propulsion. In this letter, we first describe an optimized construction method for a humanoid robot equipped with wheels and a flight unit to achieve these abilities. Then, we describe the integrated control framework of the proposed flying humanoid for each locomotion mode: aerial, legged, and wheeled locomotion. Finally, we achieved multimodal locomotion and aerial manipulation experiments using the proposed robot platform. To the best of our knowledge, this is the first time that a single humanoid has simultaneously achieved three different types of locomotion, including flight.