Angxiao Yan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Angxiao Yan has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Baoyong Chi
School of Integrated Circuits, Tsinghua University, Beijing, China
8 shared publications - Haikun Jia
School of Integrated Circuits, Tsinghua University, Beijing, China
8 shared publications - Wei Deng
Tsinghua University
8 shared publications - Zhihua Wang
Tsinghua University
7 shared publications Shiyan Sun
School of Integrated Circuits, Tsinghua University, Beijing, China
5 shared publicationsChao Tang
Tsinghua University
3 shared publications
Latest Publications
- 30 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (4) , 1589-1602
A Cycle-Slip Compensated FMCW Digital PLL With Background Back-Tracking DPD
This article introduces an 11.4-to-16.4-GHz digital phase-locked loop (PLL) for chirp generation in frequency-modulated continuous-wave (FMCW) radars. The PLL is implemented in a frequency-domain, type-II two-point modulation (TPM) structure. A cycle-slip compensation scheme is proposed to identify overflow events in the time-to-digital converter (TDC) and correct the miscalculated frequency error, thereby improving chirp linearity during fast chirp generation. To reduce frequency errors caused by frequency overlaps in a multi-bank digitally controlled oscillator (DCO), a back-tracking digital pre-distortion (DPD) scheme is introduced to ensure robust convergence despite capacitor mismatch-induced asymmetric frequency overlaps in triangular chirp modulations. The FMCW digital PLL, implemented in a 28-nm CMOS technology, consumes 10 mW of power and occupies an area of 0.19 mm2. It is capable of generating a frequency modulation (FM) chirp with a 960-MHz/ $\mu $ s slope and a 3.84-GHz bandwidth while achieving a normalized rms FM error of 0.032%.
- 30 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (4) , 1589-1602
A Cycle-Slip Compensated FMCW Digital PLL With Background Back-Tracking DPD
This article introduces an 11.4-to-16.4-GHz digital phase-locked loop (PLL) for chirp generation in frequency-modulated continuous-wave (FMCW) radars. The PLL is implemented in a frequency-domain, type-II two-point modulation (TPM) structure. A cycle-slip compensation scheme is proposed to identify overflow events in the time-to-digital converter (TDC) and correct the miscalculated frequency error, thereby improving chirp linearity during fast chirp generation. To reduce frequency errors caused by frequency overlaps in a multi-bank digitally controlled oscillator (DCO), a back-tracking digital pre-distortion (DPD) scheme is introduced to ensure robust convergence despite capacitor mismatch-induced asymmetric frequency overlaps in triangular chirp modulations. The FMCW digital PLL, implemented in a 28-nm CMOS technology, consumes 10 mW of power and occupies an area of 0.19 mm2. It is capable of generating a frequency modulation (FM) chirp with a 960-MHz/ $\mu $ s slope and a 3.84-GHz bandwidth while achieving a normalized rms FM error of 0.032%.
- 25 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (2) , 491-509
A D-Band Distributed MIMO FMCW Radar CMOS Transceiver
This work introduces a D-band 4TX/4RX distributed multiple-input-multiple-output (MIMO) frequency-modulated continuous-wave (FMCW) radar CMOS transceiver with real-time reference-clock synchronization for multistatic imaging system. The proposed synchronized distributed MIMO radar system eliminates the frequency error, time error, and slope error of local oscillator (LO) signals between radar stations to ensure the correct acquisition and analysis of radar signals, which enables the combination of target data from multitude of transmitting and receiving stations coherently. In addition, several circuit design techniques, including harmonic extraction series power synthesis and harmonic suppression (HS) frequency doubling, are investigated. This work achieves better detection performance than traditional MIMO radar with the same number of channels, demonstrating its advantages in future cooperative coherent multistatic imaging systems.
- 25 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (2) , 491-509
A D-Band Distributed MIMO FMCW Radar CMOS Transceiver
This work introduces a D-band 4TX/4RX distributed multiple-input-multiple-output (MIMO) frequency-modulated continuous-wave (FMCW) radar CMOS transceiver with real-time reference-clock synchronization for multistatic imaging system. The proposed synchronized distributed MIMO radar system eliminates the frequency error, time error, and slope error of local oscillator (LO) signals between radar stations to ensure the correct acquisition and analysis of radar signals, which enables the combination of target data from multitude of transmitting and receiving stations coherently. In addition, several circuit design techniques, including harmonic extraction series power synthesis and harmonic suppression (HS) frequency doubling, are investigated. This work achieves better detection performance than traditional MIMO radar with the same number of channels, demonstrating its advantages in future cooperative coherent multistatic imaging systems.
- 25 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (11) , 4167-4179
A Low-Spur and Low-Jitter Fractional Output Divider With Self-Adaption Frequency Filtering Technique
An open-loop fractional output divider (FOD) with self-adaption frequency filtering for digital-to-time converter (DTC) gain and integrated non-linearity (INL) background calibration is presented in this article. The DTC is usually adopted in the FOD to compensate the quantization error. However, the delay of the DTC is sensitive to process, voltage, and temperature (PVT) variations, which necessities gain and INL calibrations. The existing FODs can only perform gain calibration or require prior knowledge to reduce spur level for a certain spur frequency. An FOD with self-adaption frequency filtering is proposed for DTC gain and INL background calibration. Spurious tones generated by the FOD are detected using a PLL-based self-adaption frequency filtering technique. The self-adaption frequency filtering quantifies the deviation of the FOD instantaneous output from its ideal output, which enables a zeroth/first/second-order DTC INL background calibration algorithm for reducing the spur level and jitter. In addition, a discrete-time model of the auxiliary PLL (aux-PLL)-based INL calibration loop is derived and analyzed. Fabricated in the 28-nm CMOS process, the proposed FOD occupies a core area of 0.084 mm2 and covers an output range of 10–300 MHz. With a 100-MHz output frequency after the divide-by-2 divider, which corrects the output duty cycle to 50%, the FOD achieves spur level of less than -80 dBc both in the sub-integer-N (int-N) and the fractional-N mode. More than 41.9-dB spur reduction is achieved when enabling the calibration according to measurement results. The FOD achieves a 10-kHz–20-MHz integrated jitter of 310 fs rms.
- 25 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (11) , 4167-4179
A Low-Spur and Low-Jitter Fractional Output Divider With Self-Adaption Frequency Filtering Technique
An open-loop fractional output divider (FOD) with self-adaption frequency filtering for digital-to-time converter (DTC) gain and integrated non-linearity (INL) background calibration is presented in this article. The DTC is usually adopted in the FOD to compensate the quantization error. However, the delay of the DTC is sensitive to process, voltage, and temperature (PVT) variations, which necessities gain and INL calibrations. The existing FODs can only perform gain calibration or require prior knowledge to reduce spur level for a certain spur frequency. An FOD with self-adaption frequency filtering is proposed for DTC gain and INL background calibration. Spurious tones generated by the FOD are detected using a PLL-based self-adaption frequency filtering technique. The self-adaption frequency filtering quantifies the deviation of the FOD instantaneous output from its ideal output, which enables a zeroth/first/second-order DTC INL background calibration algorithm for reducing the spur level and jitter. In addition, a discrete-time model of the auxiliary PLL (aux-PLL)-based INL calibration loop is derived and analyzed. Fabricated in the 28-nm CMOS process, the proposed FOD occupies a core area of 0.084 mm2 and covers an output range of 10–300 MHz. With a 100-MHz output frequency after the divide-by-2 divider, which corrects the output duty cycle to 50%, the FOD achieves spur level of less than -80 dBc both in the sub-integer-N (int-N) and the fractional-N mode. More than 41.9-dB spur reduction is achieved when enabling the calibration according to measurement results. The FOD achieves a 10-kHz–20-MHz integrated jitter of 310 fs rms.
- 10 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (3) , 1014-1029
A Digital-Intensive 1TX/2RX IEEE 802.15.4/4z-Compliant Joint-Radar-Communication-Location Transceiver SoC
This article introduces a digital-intensive 6–11 GHz 1TX/2RX IEEE 802.15.4/4z-Compliant joint-Radar-Communication-Location transceiver (TRX) SoC for indoor multi-sensor data fusion. The proposed transceiver utilizes the environment detection and awareness capabilities of the frequency-modulated continuous wave (FMCW) radar to complement the shortcomings of ultra-wideband (UWB) systems in indoor positioning applications. Additionally, the communication capability of the UWB can be used to fuse FMCW radar signals from various sources to model complex, large indoor scenes, enhancing the practicality of the FMCW and UWB fused system. The proposed joint-radar-communication-location transceiver SoC is designed and implemented in 28 nm CMOS technology, supporting UWB and FMCW radar modes. The UWB mode is compatible with IEEE 802.15.4/4z, providing accurate distance measurement, location information, and communication capabilities. The FMCW radar mode actively detects and models indoor environments. The transceiver covers an RF range of 6–11 GHz, supporting various communication data rates of 0.85/6.81/27.24 Mb/s. The measured ranging accuracy is $\pm$ 2 cm, and the measured angle accuracy is $\pm$ 4 $^{\circ}$ . In the FMCW radar mode, the measured chirp bandwidth exceeds 2 GHz, the received SNR within 10 m is greater than 20 dB, and the measured distance resolution is better than 10 cm. Additionally, the transceiver SoC incorporates a UWB communication-enabled FMCW radar imaging algorithm for the system-level demonstration.
- 10 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (3) , 1014-1029
A Digital-Intensive 1TX/2RX IEEE 802.15.4/4z-Compliant Joint-Radar-Communication-Location Transceiver SoC
This article introduces a digital-intensive 6–11 GHz 1TX/2RX IEEE 802.15.4/4z-Compliant joint-Radar-Communication-Location transceiver (TRX) SoC for indoor multi-sensor data fusion. The proposed transceiver utilizes the environment detection and awareness capabilities of the frequency-modulated continuous wave (FMCW) radar to complement the shortcomings of ultra-wideband (UWB) systems in indoor positioning applications. Additionally, the communication capability of the UWB can be used to fuse FMCW radar signals from various sources to model complex, large indoor scenes, enhancing the practicality of the FMCW and UWB fused system. The proposed joint-radar-communication-location transceiver SoC is designed and implemented in 28 nm CMOS technology, supporting UWB and FMCW radar modes. The UWB mode is compatible with IEEE 802.15.4/4z, providing accurate distance measurement, location information, and communication capabilities. The FMCW radar mode actively detects and models indoor environments. The transceiver covers an RF range of 6–11 GHz, supporting various communication data rates of 0.85/6.81/27.24 Mb/s. The measured ranging accuracy is $\pm$ 2 cm, and the measured angle accuracy is $\pm$ 4 $^{\circ}$ . In the FMCW radar mode, the measured chirp bandwidth exceeds 2 GHz, the received SNR within 10 m is greater than 20 dB, and the measured distance resolution is better than 10 cm. Additionally, the transceiver SoC incorporates a UWB communication-enabled FMCW radar imaging algorithm for the system-level demonstration.
- 5 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 59 (10) , 3123-3141
A Fully Integrated QPSK/16-QAM D-Band CMOS Transceiver With Mixed-Signal Baseband Circuitry Realizing Digital Interfaces
This work presents a fully integrated $D$ -band transceiver (TRX) in 28-nm CMOS. The system architecture introduces a radio-frequency digital-to-analog converter (RF-DAC) and the complete mixed-signal baseband (BB) circuitry, including the equalizer, realizing fully digital BB interfaces at 24-Gb/s quadrature phase shift keying (QPSK) and 48-Gb/s 16-quadrature amplitude modulation (16-QAM). Innovations at the circuit level encompass: 1) the $D$ -band RF front end (FE) using the proposed hybrid matching technique; 2) the two-stage conversion paths highlighting the Cartesian RF-DAC with an embedded four-tap finite impulse response (FIR) filter; 3) the local oscillator (LO) including an all-digital phase-locked loop (ADPLL) and the LO distribution network; and 4) the mixed-signal BB circuitry. The TRX achieves a transmitter (TX) bandwidth of 21 GHz, a receiver (RX) bandwidth of 18 GHz, a TX saturated output power ( $P_\text{sat}$ ) of 13.1 dBm, a TX output 1-dB compression point ( $\text{OP}_\text{1\,dB}$ ) of 7.5 dBm, and an RX noise figure (NF) of 9.3 dB.
- 5 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 59 (10) , 3123-3141
A Fully Integrated QPSK/16-QAM D-Band CMOS Transceiver With Mixed-Signal Baseband Circuitry Realizing Digital Interfaces
This work presents a fully integrated $D$ -band transceiver (TRX) in 28-nm CMOS. The system architecture introduces a radio-frequency digital-to-analog converter (RF-DAC) and the complete mixed-signal baseband (BB) circuitry, including the equalizer, realizing fully digital BB interfaces at 24-Gb/s quadrature phase shift keying (QPSK) and 48-Gb/s 16-quadrature amplitude modulation (16-QAM). Innovations at the circuit level encompass: 1) the $D$ -band RF front end (FE) using the proposed hybrid matching technique; 2) the two-stage conversion paths highlighting the Cartesian RF-DAC with an embedded four-tap finite impulse response (FIR) filter; 3) the local oscillator (LO) including an all-digital phase-locked loop (ADPLL) and the LO distribution network; and 4) the mixed-signal BB circuitry. The TRX achieves a transmitter (TX) bandwidth of 21 GHz, a receiver (RX) bandwidth of 18 GHz, a TX saturated output power ( $P_\text{sat}$ ) of 13.1 dBm, a TX output 1-dB compression point ( $\text{OP}_\text{1\,dB}$ ) of 7.5 dBm, and an RX noise figure (NF) of 9.3 dB.
- Top Cited Papers
- 28 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 58 (2) , 411-427
A D-Band Joint Radar-Communication CMOS Transceiver
A$D$ -band joint radar-communication complementary metal–oxide–semiconductor (CMOS) transceiver featuring a dual-function mode multiplexer, a power-combining PA with high output power, a current choking high-gain mixer, a two-point modulation (TPM) frequency-modulated continuous-wave (FMCW) digital phase-locked loop (PLL) with a dual-core DCO, and a wideband I/Q local oscillator (LO) generator is implemented in 28-nm CMOS technology. In the radar mode, the RF front end demonstrates 46-GHz bandwidth (BW), and the on-chip PLL/LO generated FMCW chirp achieves a BW of 30 GHz and a slope of 30 GHz/50$\mu$ s. In the communication mode, the transceiver including the analog baseband realizes 20-GHz BW, and the image rejection ratio (IRR) is better than 40 dB. The measured transmitter (TX) saturated output power is 13 dBm, and the output 1-dB compression point (OP1dB) is 8.3 dBm. The measured typical PLL phase noise is$-$ 111.3 dBc/Hz at a 1-MHz offset from an 11.69-GHz carrier frequency. The TX-to-RX over-the-air (OTA) modulation–demodulation measurement with QPSK and 16-QAM signals shows the error vector magnitude (EVM) of$-$ 16.5 and$-$ 19.7 dB, respectively.- 28 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 58 (2) , 411-427
Top Cited PapersA D-Band Joint Radar-Communication CMOS Transceiver
A$D$ -band joint radar-communication complementary metal–oxide–semiconductor (CMOS) transceiver featuring a dual-function mode multiplexer, a power-combining PA with high output power, a current choking high-gain mixer, a two-point modulation (TPM) frequency-modulated continuous-wave (FMCW) digital phase-locked loop (PLL) with a dual-core DCO, and a wideband I/Q local oscillator (LO) generator is implemented in 28-nm CMOS technology. In the radar mode, the RF front end demonstrates 46-GHz bandwidth (BW), and the on-chip PLL/LO generated FMCW chirp achieves a BW of 30 GHz and a slope of 30 GHz/50$\mu$ s. In the communication mode, the transceiver including the analog baseband realizes 20-GHz BW, and the image rejection ratio (IRR) is better than 40 dB. The measured transmitter (TX) saturated output power is 13 dBm, and the output 1-dB compression point (OP1dB) is 8.3 dBm. The measured typical PLL phase noise is$-$ 111.3 dBc/Hz at a 1-MHz offset from an 11.69-GHz carrier frequency. The TX-to-RX over-the-air (OTA) modulation–demodulation measurement with QPSK and 16-QAM signals shows the error vector magnitude (EVM) of$-$ 16.5 and$-$ 19.7 dB, respectively. - 2 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 57 (4) , 1162-1174
A Self-Adapted Two-Point Modulation Type-II Digital PLL for Fast Chirp Rate and Wide Chirp-Bandwidth FMCW Signal Generation
Different from the conventional two-point modulation (TPM) type-II phase-locked loops (PLLs) requiring non-trivial gain calibrations and TPM type-III PLLs with loop stability concern and limited chirp rate, a self-adapting gain mismatch TPM type-II digital PLL is proposed in this article. It directly detects frequency error as its input signal, allowing frequency ramp tracking with zero steady-state frequency error using a type-II PLL. In addition, the maximum trackable slope in the case of the proposed TPM type-II PLL is intrinsically larger than that of the conventional TPM type-III PLL. A polarity navigator is embedded in the digital loop filter to improve the linearity at the chirp turning-around points (TAPs). Fabricated in a 28-nm complementary metal–oxide–semiconductor (CMOS) technology, the proposed PLL consumes 23 mW from a 1-V power supply and occupies 0.31 mm 2 . The measurement results indicate that the proposed PLL can generate a precise triangular chirp with 2.27-GHz bandwidth (BW) and 18.2- $\mu \text{s}$ period at 12.5 GHz. To the best knowledge of the authors, this work demonstrates the widest normalized Chirp-bandwidth and the fastest chirp rate simultaneously.
- 2 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 57 (4) , 1162-1174
A Self-Adapted Two-Point Modulation Type-II Digital PLL for Fast Chirp Rate and Wide Chirp-Bandwidth FMCW Signal Generation
Different from the conventional two-point modulation (TPM) type-II phase-locked loops (PLLs) requiring non-trivial gain calibrations and TPM type-III PLLs with loop stability concern and limited chirp rate, a self-adapting gain mismatch TPM type-II digital PLL is proposed in this article. It directly detects frequency error as its input signal, allowing frequency ramp tracking with zero steady-state frequency error using a type-II PLL. In addition, the maximum trackable slope in the case of the proposed TPM type-II PLL is intrinsically larger than that of the conventional TPM type-III PLL. A polarity navigator is embedded in the digital loop filter to improve the linearity at the chirp turning-around points (TAPs). Fabricated in a 28-nm complementary metal–oxide–semiconductor (CMOS) technology, the proposed PLL consumes 23 mW from a 1-V power supply and occupies 0.31 mm 2 . The measurement results indicate that the proposed PLL can generate a precise triangular chirp with 2.27-GHz bandwidth (BW) and 18.2- $\mu \text{s}$ period at 12.5 GHz. To the best knowledge of the authors, this work demonstrates the widest normalized Chirp-bandwidth and the fastest chirp rate simultaneously.