NDNazarbek Mukhaddasuly Daurenbek

Nazarbek Mukhaddasuly Daurenbek

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nazarbek Mukhaddasuly Daurenbek has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    MODIFICATION OF TAR USING GOSSYPOLE RESIN AND RECYCLED POLYPROPYLENE

    by S. А. Batyrbay, О. K. Beisenbayev, А. S. Sidikov, N. M. Daurenbek

    In modern conditions, special attention is given to the development of environmentally friendly and durable binders produced using secondary and renewable resources. One of the promising approaches is the modification of petroleum binders with natural and polymer components capable of improving their performance characteristics. In this study, the modification of bitumen residue was carried out using a mixture of gossypol resin and recycled polypropylene (RPP) in the presence of potassium persulfate (K₂S₂O₈), which served as a radical initiator. The application of FTIR spectroscopy and scanning electron microscopy made it possible to identify the formation of new functional groups, an increase in binder polarity, and a more uniform distribution of the polymer phase within its structure. The conducted tests revealed improvements in the adhesive, thermal, and deformation properties of the modified material compared to the original bitumen residue. The enhancement of structural-mechanical strength and aging resistance indicates a synergistic effect between gossypol resin and RPP. The developed technology demonstrates the efficiency of utilizing cotton processing and plastic waste, offering opportunities to create sustainable, high-quality, and competitive binder systems with reduced environmental risks and expanded areas of application, including road construction, waterproofing coatings, industrial mixtures, and innovative composite materials for the construction industry.

  • The role of natural resins and recycled polymeric modifiers in bitumen composition

    by S.A. Batyrbay, O.K. Beisenbayev, A.S. Sidikov, N.M. Daurenbek

    Bitumen, as the primary binding component in asphalt mixtures, plays a defining role in determining the structural integrity, durability, and overall performance of road pavements. However, unmodified bitumen frequently proves inadequate under the combined pressures of increasing traffic loads, extreme temperature cycles, moisture infiltration, and accelerated oxidative aging — challenges that are intensifying in the context of modern infrastructure demands. Modifiers introduced into bitumen composition serve a fundamental purpose: they alter the internal microstructure of the binder, improving its rheological properties, extending its service temperature range, and enhancing resistance to deformation, fatigue cracking, and premature aging. This review critically examines the specific roles that two major classes of sustainable modifiers — bio-based resins (including gossypol resin and technical lignin) and post-consumer recycled thermoplastics (polypropylene, polyethylene grades, and polyethylene terephthalate) — fulfill within bitumen composition. Bio-based resins integrate into the bitumen matrix through physico-chemical interactions that reinforce the colloidal structure, reduce oxidative susceptibility, and improve lowtemperature flexibility, while recycled thermoplastics form polymer networks within the binder that dramatically increase stiffness and rutting resistance at elevated service temperatures. Beyond performance improvements, these modifier classes address pressing contemporary problems: the depletion of high-quality petroleum resources, the accumulation of plastic waste in landfills and ecosystems, growing regulatory pressure to reduce the carbon footprint of construction materials, and the economic burden of frequent road maintenance and rehabilitation.

  • Possibilities of using a mixture of Kazakhstan oils as a raw material for the production of jet kerosenes

    by M. Auezov South Kazakhstan University, G.F. Aitimbetova, N.M. Daurenbek, A.SH. Kydyraliyeva

    In the context of constant renewal of the aircraft fleet of airlines in the Republic of Kazakhstan by equipping it with modern aircraft such as Boeing, Airbus, etc., the problem of developing a technology for producing aviation fuels made from local oil raw materials is urgent. In order to provide the Shymkent Oil Refinery with raw materials, it is necessary to conduct targeted and extensive scientific research to determine the physical and chemical characteristics of oils and oil mixtures, their individual distillate fractions. This paper presents the results of a study of oils, a mixture of oils and straight-run fractions obtained from them, which are potential raw materials for the production of aviation fuels for gas turbine engines, and indicates the directions and methods for obtaining commercial grades of aviation kerosene. The directions and methods for obtaining commercial grades of aviation kerosene TS-1, RT and Jet A-1 from straight-run kerosene fractions are determined. Hydrodewaxed kerosene fraction with the possibility of involving straight-run kerosene fraction from atmospheric distillation of oil can be used as the main component of Jet A-1 fuel produced by the Shymkent Oil Refinery. Considering the need for stable and continuous production of aviation kerosene at refineries of the Republic of Kazakhstan, regardless of the quality of the processed oil, it is advisable to produce Jet A-1 fuel using technology using hydrogenation processes and the introduction of lubricating and antioxidant additives.

  • Composition of gasolinefractions of Kumkol oil and improvement of theiroperational properties

    by M. Auezov South Kazakhstan University, B.A. Abdikerimov, K.K. Syrmanova, D.S. Yerzhanov, Too Mangistau Oil Refining, N.M. Daurenbek

    The physicochemical properties of gasoline fractions of paraffinic oil from the Kumkol field have been investigated and the distinctive features of the individual hydrocarbon composition of the straight-run gasoline fraction and catalytic reforming gasoline have been established. The wide straight-run gasoline fraction (62-180°C) of Kumkol oil was subjected to preliminary hydrotreating at an industrial unit that is part of the catalytic reforming unit using S-12T and GO70 catalysts at a process temperature of 315 – 343°C, a pressure in the reactor of 21 – 27 atm, a volume feed rate of 6.4 – 9.4 h-1, with the circulation of HCG (Hydrogen-containing gas) «on the duct». Conditions under which catalytic reforming was carried out: temperature in the reaction zone – 470 ÷ 500°C, pressure – 28 kgf/cm2 , volumetric feed rate of raw materials – 1.5 h-1, gas circulation – 5.9 mol H2 / mol of raw materials. It has been established that in the process of reforming, as a result of isomerization of n-paraffins and dehydrogenation of cylanes, isoparaffin and aromatic hydrocarbons are intensively formed in the composition of reformant, and thereby the octane number of reforming gasoline is sharply increased. Gasoline obtained in the process of catalytic reforming from a narrow fraction of Kuikol oil meets the requirements for commercial, high-octane grades of motor fuel in all quality indicators. A significant synergistic effect has been established with the combined action of a two-component mixture compared to that for individual additives: a small concentration of the additive Hightech (manganese-containing) 18 mg/l and oxygen-containing AHA (ash-free high-octane additive) increases the octane number M.M. (motor method) by 3.3 points and according to R.M. (research method) by 5.3 points, and when introducing the additive Hitech 18 mg/l in a mixture with N-methylaniline, the increase in the O.N. (octane number) for M.M. was 4.4 units, and for R.M. (research method) – 6.

  • Use of carbon black as a modifier for petroleum bitumen

    by M. Auezov South Kazakhstan University, N.B. Ainabekov, N.M. Daurenbek, G.F. Sagitova

    The problem of recycling worn-out tires and recycling of solid carbon-containing residue from the pyrolysis of tires is considered. The possibility of processing carbon black from the pyrolysis of tires into a high-quality concentrate, which can serve as a raw material for modifying petroleum bitumen, has been shown. The nature of the interactions occurring between the components of carbon black and the matrix of petroleum road bitumens has been studied. The chemical interaction of carbon black with the bitumen matrix through unsaturated C=C bonds has been proven. The introduction of carbon black as a modifying additive leads to a significant change in the physical, mechanical and rheological properties of the resulting bitumen binder systems. Based on spectrometric studies, an assessment is made of the structural changes occurring in the original and modified bitumen during the production of modified bitumen binders. It has been established that with such modification, diffusion of aromatic hydrocarbons occurs from the bitumen component into the modifier particles. During the modification process, six-membered cyclic aromatic compounds are formed in the bitumen part, the composition of paraffin-naphthenic hydrocarbons changes, and sulfur compounds are formed that “transfer” from the modifier particles to the bitumen. Thus, in this study, the phenomenon of mutual diffusion between bitumen and CBWT modifier was confirmed using IR spectroscopy.

  • Open Access

    Modified Bitumen Materials from Kazakhstani Oilfield

    by Guzaliya Faritovna Sagitova, Nurzhan Bauyrzhanovich Ainabekov, Nazarbek Mukhaddasuly Daurenbek, Dina Duisenbekkyzy Assylbekova, Ainur Slambekovna Sadyrbayeva, Aliya Erkegulovna Bitemirova, Gulchekhra Abdyrakhmanovna Takibayeva

    The oil bitumen BND 90/130, produced at the “LLP SP Caspi Bitum” with the modifier, which consists of copolymer of ethylene with butyl acrylate and glycidyl methacrylate taken in an amount of 0.5–1.6 wt%, and the tire reclaim (4–20 wt%), which is the destructate of mesh elastomers of different chemical nature, was modified; possibility of using the developed bitumen-elastomer binders in road asphalt concrete was justified. Modification of bitumen with a copolymer of ethylene with butyl acrylate and glycidyl methacrylate leads to an improvement in the properties of road bitumen: the softening point, hardness, deformability at low temperatures, elasticity, and adhesion to metal and mineral filler increase. It was shown that ethylene with butyl acrylate and glycidyl methacrylate chemically interacts with the functional groups of bitumen asphaltenes through the epoxy group of glycidyl methacrylate. Analysis of the spectra and group composition indicates an increased content of high molecular weight asphaltenes in the modified bitumen with a slight increase in structuring resins. It has been established that bitumen modified with rubber crumbs of 0.6–1.0 mm in size has high elasticity. The most effective composition of a bitumen-regenerated composite material based on tire reclaim has been determined. In terms of the totality of physicochemical and operational characteristics and comparative cost, the most acceptable is the bitumen-regenerated composition (with a regenerate content of 20%) and is superior in the complex of properties to bitumen modified with an optimal content of ethylene with butyl acrylate and glycidyl methacrylate (1.6%). The technology for modifying bitumen with tire reclaim is less time-consuming, more economically profitable, and environmentally effective, since it utilizes large-tonnage waste of worn-out tires. The resulting bitumen-polymer compositions have a high positive set of properties: softening point, hardness, elasticity, frost resistance, and low-temperature characteristics.


  • Influence of group chemical composition of highly viscous oil residues on quality of petroleum road bitumens

    by N.B. Ainabekov, M. Auezov South Kazakhstan University, G.F. Sagitova, N.M. Daurenbek

    The Kalamkas deposit’s oil and its distillation products were studied, and research results on residues and road grade bitumen compositions obtained by oxidation of heavy oil residuest are presented. The atmospheric residue of Kalamkas oil (350 Со) was subjected to vacuum distillation with the selection of gas oil fractions boiling to 380, 400 and 420 Со. Samples of residues were subjected to oxidation in a laboratory installation, which is a batch cube at constant operating conditions. The residues from different depths of gas oil fractions are characterized by different group chemical compositions. The group composition of the residues changes, the content of paraffinnaphthenic hydrocarbons decreases from 29.4 to 23.3% wt. and the proportion of heavy aromatic hydrocarbons increases from 26.8 to 27.8% wt. The content of asphaltenes (from 7.7 to 12.4% wt) and resins (from 17.4 to 22.5% wt) also increases. The ratio of asphaltenes and resins increases from 0.44 to 0.55. With an increase in the depth of selection of gas oil fractions to 420°C, the degree of aromaticity, the ratio of the amount of aromatic hydrocarbons to paraffin-naphthenic ones, increases to 1.79. Road grade bitumens produced from the vacuum distillation residues of Kalamkas oil fuel oil using direct oxidation technology of raw materials have the best performance characteristics if they are obtained from residues boiling in the range of 380–400°C. Residues boiling above 380-400 Со can serve as raw materials for the production of oxidized road bitumen of BND70/100 grade according to ST RK 1373 - 2013.

  • Open Access

    THE RESULTS OF STUDIES OF THE COMPOSITION OF OIL SLUDGE OF PETROKAZAKHSTAN OIL PRODUCTS LLP FOR THE SELECTION OF THEIR PROCESSING TECHNOLOGIES

    by M. Auezov South-Kazakhstan University, N.M. Daurenbek, А.к. Tulekbaeva, T.K. Akilov, N.N. Issabayev, A.M. Azimov

    The article examines the physico-chemical properties and composition of oil sludge of PetroKazakhstan Oil Products LLP. The extraction method was used to isolate the organic part of the oil sludge. Benzene was used as an extractant. Extraction was carried out until the staining of the extractant was stopped. For petroleum products isolated from slurries, studies of the fractional composition were carried out using standard methods of analysis of petroleum products. In the composition of mechanical impurities, the proportion of the organic part of the studied samples was 61.86 - 71.22% by weight, ash elements obtained by calcination 59.5% by weight.

  • Open Access

    ИССЛЕДОВАНИЕ ВЛИЯНИЯ ДЕПРЕССОРНЫХ ПРИСАДОК НА ТЕМПЕРАТУРУ ЗАСТЫВАНИЯ ДИЗЕЛЬНЫХ ТОПЛИВ

    by Э.с. Тлеубай, Республика Казахстан Южно-Казахстанский Университет Им. М. Ауэзова, Н.м. Дауренбек, Б.а. Абдикеримов, К.к. Сырманова

  • Open Access

    Влияния оксигенатов и их композиций на эксплуатационные характеристики автомобильных бензинов

    by Б.а. Абдикеримов, Республика Казахстан Южно-Казахстанский Университет Им. М. Ауэзова, К.к. Сырманова, Э.с. Тлеубай, Н.м. Дауренбек