ASA. S. Sidikov

A. S. Sidikov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


A. S. Sidikov has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    MODIFICATION OF TAR USING GOSSYPOLE RESIN AND RECYCLED POLYPROPYLENE

    by S. А. Batyrbay, О. K. Beisenbayev, А. S. Sidikov, N. M. Daurenbek

    In modern conditions, special attention is given to the development of environmentally friendly and durable binders produced using secondary and renewable resources. One of the promising approaches is the modification of petroleum binders with natural and polymer components capable of improving their performance characteristics. In this study, the modification of bitumen residue was carried out using a mixture of gossypol resin and recycled polypropylene (RPP) in the presence of potassium persulfate (K₂S₂O₈), which served as a radical initiator. The application of FTIR spectroscopy and scanning electron microscopy made it possible to identify the formation of new functional groups, an increase in binder polarity, and a more uniform distribution of the polymer phase within its structure. The conducted tests revealed improvements in the adhesive, thermal, and deformation properties of the modified material compared to the original bitumen residue. The enhancement of structural-mechanical strength and aging resistance indicates a synergistic effect between gossypol resin and RPP. The developed technology demonstrates the efficiency of utilizing cotton processing and plastic waste, offering opportunities to create sustainable, high-quality, and competitive binder systems with reduced environmental risks and expanded areas of application, including road construction, waterproofing coatings, industrial mixtures, and innovative composite materials for the construction industry.

  • Open Access

    APPLICATION OF ZEOLITES FROM THE CHANKANAI DEPOSIT IN RUBBER PRODUCTION

    by A. О. Оrazymbetova, G. F. Sagitova, A. S. Sidikov, S. A. Sakibayeva, A. Zh. Suigenbaуeva

    This article presents the results of a study of natural and activated zeolite from the Chankanai deposit as a filler for rubber compounds. The results of extensive scientific research aimed at analyzing the effect of mineral additives on the properties of elastomers confirm the high potential and future prospects for this area of research. The introduction of mineral additives into the rubber matrix under standard conditions improves its performance characteristics, reducing the cost of the material, improving its elastic and strength properties, and optimizing its processing properties. The goal of this work is to replace expensive fillers with more affordable alternatives while maintaining all the required properties of rubber compounds. Maintaining strength, elasticity, wear resistance, and other key performance indicators is a top priority when searching for and implementing replacements, allowing for cost reductions without compromising product quality. Therefore, the proposed ingredients must provide the same or improved properties to ensure the finished product meets standards and operating requirements. The study focuses on zeolites from the Chankanai deposit and rubbers used to produce dielectric mats, which must possess high electrical insulating properties and mechanical strength. Energy-dispersive spectroscopy was used to obtain data on the elemental composition of the zeolite powder samples studied. This information is critical, as it allows us to assess the effectiveness of zeolites as fillers in rubber production. Experimental studies have shown that vulcanizates obtained by partially replacing 40 parts by weight of white carbon with activated zeolite from the Chankanai deposit exhibit satisfactory physical and mechanical properties. This opens up new prospects for the use of natural and activated zeolites in the rubber industry, contributing to both cost reduction and improved vulcanizate quality.

  • The role of natural resins and recycled polymeric modifiers in bitumen composition

    by S.A. Batyrbay, O.K. Beisenbayev, A.S. Sidikov, N.M. Daurenbek

    Bitumen, as the primary binding component in asphalt mixtures, plays a defining role in determining the structural integrity, durability, and overall performance of road pavements. However, unmodified bitumen frequently proves inadequate under the combined pressures of increasing traffic loads, extreme temperature cycles, moisture infiltration, and accelerated oxidative aging — challenges that are intensifying in the context of modern infrastructure demands. Modifiers introduced into bitumen composition serve a fundamental purpose: they alter the internal microstructure of the binder, improving its rheological properties, extending its service temperature range, and enhancing resistance to deformation, fatigue cracking, and premature aging. This review critically examines the specific roles that two major classes of sustainable modifiers — bio-based resins (including gossypol resin and technical lignin) and post-consumer recycled thermoplastics (polypropylene, polyethylene grades, and polyethylene terephthalate) — fulfill within bitumen composition. Bio-based resins integrate into the bitumen matrix through physico-chemical interactions that reinforce the colloidal structure, reduce oxidative susceptibility, and improve lowtemperature flexibility, while recycled thermoplastics form polymer networks within the binder that dramatically increase stiffness and rutting resistance at elevated service temperatures. Beyond performance improvements, these modifier classes address pressing contemporary problems: the depletion of high-quality petroleum resources, the accumulation of plastic waste in landfills and ecosystems, growing regulatory pressure to reduce the carbon footprint of construction materials, and the economic burden of frequent road maintenance and rehabilitation.

  • Bitumen composites from petroleum tar modified with secondary polymer and gossypol resin

    by S.A. Batyrbay, O.K. Beisenbayev, S.S. Abduzhalol

    This research examines the enhancement of petroleum tar through its modification with gossypol resin and secondary/recycled polypropylene (SPP), aiming to obtain a bituminous binder with superior physicochemical and performance characteristics. The modification procedure was implemented under strictly regulated thermo-mechanical regimes. Benzoyl peroxide was employed as a radical initiator to facilitate reactive coupling between polypropylene macromolecules and the functional groups intrinsic to gossypol resin. The resulting chemical transformations and microstructural reorganization were systematically characterized using Fourier-transform infrared spectroscopy and electron microscopy. Experimental findings indicate that the concurrent incorporation of gossypol resin and SPP induces the formation of a reinforced polymer–resin network enhances structural uniformity and contributes to the binder’s resistance to thermal and mechanical stresses. The proposed modification strategy presents a resource-efficient approach for valorizing polypropylene waste and provides a technologically and environmentally viable route for producing next-generation bituminous binders.

  • Open Access

    PHYSICAL AND CHEMICAL MODIFICATION OF NATURAL MINERAL OF CHANKANAY DEPOSIT

    by А. О. Оразымбетова, Г. Ф. Сагитова, А. С. Сидиков, S. Sakibayeva, A. Suigenbaуeva, А. Ж. Суйгенбаева

    The development of domestic rubber adhesion promoters based on mineral raw materials is a pressing task. The formation of a bond with high and stable strength in the elastomer-metal system always remains the focus of attention when creating new formulations and new ingredients. The introduction of nickel salts into the rubber mixture significantly increases the stability of the bond strength in the rubber-metal cord system under the influence of moisture, elevated temperature and sodium chloride, since in their presence the formation of weak boundary layers of ZnO/Zn(OH)2 is delayed.Interest in zeolites as fillers and adhesion promoters is caused by their ability not only to reduce costs, but also to impart qualitatively new useful properties to materials and products, and the ability to set or adjust these properties. The properties of any mineral raw material can be adjusted through modification. Thermal and chemical treatment of zeolites with solutions of acids, alkalis and salts allows modifying zeolites and purposefully changing their properties in relation to solving a particular problem. In this work, physical and chemical modification of zeolite from the Chankanai deposit was carried out. The cation exchange properties of natural zeolite Chankanai were studied. The ion exchange of the initial calcium cation was carried out with nickel cationite. The results of experimental and physicochemical analysis methods confirm the penetration of nickel ions onto the surface of the zeolite, which has a microhard structure. It was found that the degree of exchange of the Ca cation contained in the initial zeolite for Ni cations is insignificant.


  • Open Access

    PHYSICOMECHANICAL PROPERTIES OF RUBBER FOR HYDRAULIC SEALS (PART 2)

    by B. Khassankhojayeva, Г. Ф. Сагитова, А. С. Сидиков, A. Tileuberdi, А. Т. Кабылбекова, Б. Ш. Хасанходжаева, А. Н. Тілеуберді

    The article examines the physicomechanical properties of rubber designed for hydraulic seals, considering the influence of additives such as the organic part of oil sludge and zeolite. The conducted research showed that these characteristics align with the parameters defining the spatial structure of the studied vulcanizates. It was established that increasing the content of the organic part of oil sludge (3-6 parts by weight) and zeolite (10-20 parts by weight) positively impacts the elongation at break, which is attributed to the modification of the rubber's structure. The most optimal physicomechanical properties of rubber were obtained when introducing 6.0 parts by weight of the organic part of oil sludge and 20.0 parts by weight of zeolite per 100 parts by weight of rubber.Additionally, the influence of temperature-time vulcanization parameters on the structure of vulcanizateswas studied. It was found that changing these parameters allows for controlling the primary elasticstrength properties of rubber. The slight decrease in strength characteristics with an increase in the organic part of oil sludge is explained by the plasticizing effect of low-molecular compounds, which penetrate between the macromolecules of rubber, weakening intermolecular bonds, as well as active interaction between the elastomer and zeolites.The results of the study demonstrate the possibility of partially or fully replacing traditional plasticizers in rubber compounds with the organic part of oil sludge. Using zeolite as a filler not only improves rubber properties but also contributes to a more effective solution to ecological problems associated with the disposal of oil production and refining waste. Thus, the proposed approaches create a basis for environmentally safe and economically efficient waste utilization, relevant to enterprises in the Republic of Kazakhstan.

  • Open Access

    THE POSSIBILITIES OF USING ZEOLITES IN VARIOUS FIELDS (REVIEW)

    by A. O. Orazymbetova, G. F. Sagitova, A. S. Sidikov, S. A. Sakibayeva, A. B. Issa

    Zeolites, due to their unique properties, have a wide range of applications. Fillers are one of the most important components of rubber compound formulations, allowing effective impact on the complex of chemical, technological, physical-mechanical and economic indicators of rubbers. Zeolite occupies a special place in this class of fillers. The purpose of this review is to analyze existing works on the study of the properties and application of zeolites for their further study as a promoting system. In recent years, active research has been carried out to create new types of promotional systems based on mineral raw materials. A characteristic feature of inorganic adhesion promoters is their ability to slowly release metal ions, which has a positive effect on the efficiency of fastening rubber to brass-plated metal during operation. This makes it possible to introduce metal salts in significant dosages without undesirable effects, especially mineral ones, which is caused mainly by the relative cheapness of the feedstock.In this aspect, zeolites have long attracted the attention of researchers as minerals with specific properties and structural features.Of all the more than 52 mineral species and varieties of zeolites known in nature, only a few meet the requirements for use for practical purposes, namely, they form large, almost monomineral concentrations and at the same time have the corresponding useful properties: high adsorption capacity, cation capacity, acid and heat resistance. Zeolites can be considered a multi-purpose raw material due to the diversity of material and chemical compositions, textural and structural characteristics, physical, mechanical and adsorption properties. And for the successful use of any mineral raw materials in various industries, a detailed study of their textural and structural characteristics is necessary, as well as a search for new ways to increase beneficial properties using modern technological methods and techniques.


  • Open Access

    THE USE OF NATURAL ZEOLITES IN THE PRODUCTION OF DIELECTRIC MATS

    by B. Khassankhojayeva, Г. Ф. Сагитова, А. С. Сидиков, S. Sakibayeva, Б. Ш. Хасанходжаева

    This article discusses the possibility of using natural zeolite from the Changkanai deposit as a filler for rubber compounds. Numerous studies devoted to the study of the effects of mineral fillers on the characteristics of rubber indicate the prospects and possibilities for the development of this field.When filling rubbers with mineral components under standard conditions, a number of positive effects are observed. In particular, this leads to a reduction in the cost of the material, improvement of its elasticstrength characteristics and optimization of the technological properties of the composition. These changes are important for the industry, where cost and material quality control plays a key role.The urgent task of this work is to replace expensive fillers with more affordable alternatives, in order to preserve all the required characteristics of rubber compounds. Therefore, the new ingredients must provide the same or improved properties so that the finished product meets the standards and operational requirements. Maintaining strength, elasticity, wear resistance and other key indicators becomes a top priority in the search and implementation of substitutes, which reduces costs without loss of product quality.Within the framework of the study, the objects of study are zeolites of the Changkanai deposit and rubbers used for the production of dielectric mats, which must have high electrical insulating properties and mechanical strength.To analyze the physico-chemical properties of zeolites, studies using IR spectroscopy and X-ray diffraction analysis were carried out. These methods provide detailed information about the structure and composition of zeolite powders, which is critically important for assessing their potential as fillers for rubber.As a result of experimental studies, it was found that the rubber mixture obtained with partial replacement of white soot with zeolite from the Changkanai deposit demonstrates satisfactory physical and mechanical properties. This opens up new prospects for the use of natural zeolites in the rubber industry, contributing to both cost reduction and improvement of the quality of the final product.Thus, the results of the work emphasize the importance of further research in this area aimed at optimizing the compositions of rubber compounds using affordable and environmentally friendly materials such as natural zeolites.