YWYaozhong Wei

Yaozhong Wei

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yaozhong Wei has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Efficient Method for the Synthesis of 5-Methylfurfural from l-Rhamnose Using a Biphasic System

    by Zongke He, Pengfei Jiang, Qianqian Cui, Ziyue Wang, Yaozhong Wei, Chao Luo, Jichang Guo, Chang Liu, Wei Zhang

    In this work, the method of highly efficient conversion of l-rhamnose to 5-methylfurfural (MF) catalyzed by various catalysts in a biphasic system was developed. To enhance the MF yield, the effects of the catalyst species, reaction temperature (150–180 °C), extraction solvents and volume ratio of the extraction to the aqueous phase (0–5) on the conversion of l-rhamnose to MF were systematically investigated. Under optimal conditions, a high MF yield of 94% was achieved in the biphasic “diisopropyl ether (DIPE) + H2O” system due to the fact that the extraction of MF to the DIPE phase significantly inhibits the condensation and degradation of MF in water. Finally, detailed reaction energetics and chemical structures of intermediates of the l-rhamnose dehydration to MF were investigated using the B3LYP level of theory and the SMD solvation model. It is evident that MF, which exhibits excellent chemical stability, harbors the potential to function as a bio-derived platform chemical within the domain of the green industry.


  • Open Access

    Design and Parametric Analysis of the Constant Force Characteristics of the Electromagnet for Hydraulic Valves

    by Wang Ren, Liujie Wu, Wei Zhang, Pengfei Jiang, Ziyue Wang, Chao Luo, Jichang Guo, Chang Liu, Yaozhong Wei, Zhiliang Chen, et al.

    The electromagnet is the most used driving device for hydraulic valves; especially the proportional electromagnet with constant force characteristics is the basis for the excellent control performance of hydraulic valves. However, the constant force characteristics of the proportional electromagnet are related to many parameters and are difficult to obtain. In view of the above problems, this paper designs a proportional electromagnet for driving hydraulic valves with the goal of constant force characteristics, with the minimum variance of the output electromagnetic force in the working range as the condition. Firstly, this paper introduces the working principle of proportional electromagnets and establishes the model of electromagnetic force. Then, the influences of the basin bottom radius, the guide angle width and the basin mouth depth on the constant force characteristics of the electromagnet were studied by the finite element method (FEM). Their values are found respectively to give the electromagnet constant force characteristics. Finally, the test bench of the electromagnet was built, and its constant force characteristics and output characteristics were continuously tested. The results show that the test results of the output electromagnet force are highly consistent with the simulation results and have constant force characteristics. Related research deepens the understanding of how the key parameters affect the constant force characteristics, and helps designers optimize these parameters to develop new structures, which have certain practical engineering values.


  • Open Access

    Image-Based Auto-Focus Microscope System with Visual Servo Control for Micro-Stereolithography

    by Yijie Liu, Xuexuan Li, Pengfei Jiang, Ziyue Wang, Jichang Guo, Chao Luo, Yaozhong Wei, Zhiliang Chen, Chang Liu, Wang Ren, et al.

    Micro-stereolithography (μSL) is an advanced additive manufacturing technique that enables the fabrication of highly precise microstructures with fine feature resolution. One of the primary challenges in μSL is achieving and maintaining precise focus throughout the fabrication process. For the successful application of μSL, it is essential to maintain the sample surface within a focal depth of several microns. Despite the growing interest in auto-focus devices, limited attention has been directed towards auto-focus systems in image-based auto-focus microscope systems for precision μSL. To address this challenge, we propose an image-based auto-focus microscope system incorporating visual servo control. In the optical design, a transflective beam splitter is employed, allowing the laser beam to pass through for fabrication while reflecting the focused beam on the sample surface to the microscope and camera. Utilizing captured spot images and the Foucault knife-edge test, a deep learning-based laser spot image processing algorithm is developed to determine the focus position based on spot size and the number of spot pixels on both sides. Experimental results demonstrate that the proposed auto-focus system effectively determines the relative position of the focal point using the laser spot image and achieves auto-focusing through visual servo control.


  • A Comparative Study of the Dissipative Contact Force Models for Collision Under External Spring Forces

    by Dong Xiang, Yinhua Shen, Yaozhong Wei, Mengxing You

    The dissipative contact force model plays a key role in predicting the response of multibody mechanical systems. Contact-impact event can frequently take place in multibody systems and the impact pair is often affected by supporting forces which are treated as external spring forces. However, the external spring forces are ignored during the derivation process of existing dissipative contact force models. Considering the influences of external spring forces, the fact is discussed that the crucial issues, including relative velocity and energy loss, in modeling dissipative contact force are different compared to the same issues analyzed in existing literatures. These differences can result in obvious errors in describing the collision response in multibody systems. Thus, a comparative study is carried out for examining the performances of several popular dissipative contact force models in multibody dynamics. For this comparison, a method associated with Newton's method is proposed to calculate the contact force that meets the Strong's law of energy loss and this force is used as reference. The comparative results show that the models suitable for both hard and soft contact exhibit good accuracy when contact equivalent stiffness is far larger than external spring stiffness by two orders of magnitude. Conversely, these models can cause varying degree and obvious errors in contact force, number of collisions, etc., especially when the difference in stiffness is close to or less than one order of magnitude.