Gihun Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Gihun Kim has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Subith S. Vasu
University of Central Florida
4 shared publications - Ramees K. Rahman
Center for Advanced Turbomachinery and Energy Research (CATER), University of Central Florida , Orlando, FL 32816
2 shared publications - Andrew Laich
University of Central Florida Center for Advanced Turbomachinery and, Energy Research (CATER), Mechanical and Aerospace Engineering Orlando, FL 32816
1 shared publication - Angel Hernandez
Mitsubishi Power, Americas, Inc , Orlando, FL 32809
1 shared publication - Bader AlMansour
The Public Authority for Applied Education and Training (PAAET) Automotive and Marine Department 70030 Kuwait
1 shared publication - Christopher Loving
Center for Advanced Turbomachinery and Energy Research, UCF , Orlando, FL 32826
1 shared publication
Latest Publications
- 22 November 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (3) , 1-17
Extended Testing of the Auto-Ignition Characteristics of Hydrogen–Natural Gas Mixtures for the Safety of Power Plants
A successful transition to global clean energy hinges on meeting the world?s growing demand for power, while at the same time reducing greenhouse gas (GHG) emissions. Achieving this will require significant growth in electricity generation from clean and carbon-free energy sources. Several energy providers [1,2] have already begun the transition from traditional carbon-based fuels to cleaner alternatives, such as hydrogen (H2) and hydrogen-enriched natural gas (HENG). There are still many technical questions/challenges that must be addressed when applying these fuels in gas turbines. The application of H2 or H2/natural gas (NG) blends to advanced class gas turbines, which have higher operating pressures and temperatures, has raised concerns about the potential for leakages or fuel sequencing operations where flammable mixtures of fuel and air could auto-ignite. There was insufficient information in the published literature to characterize the influence of pressure on the AIT of H2 and HENG fuels. This study describes the test methodology used to evaluate conditions where auto-ignition occurs for various fuel-air mixtures operating at different pressures (10 - 30 atm) and temperatures. Testing was completed with NG, 100% H2 and multiple H2/NG blends at various equivalence ratios (ER) between 0.2 – 2.5. At 30 atmospheres, the increased presence of H2 increased the AIT up to 70% H2. At pressures above 10 atm, increased equivalence ratio resulted in reduced AIT for all mixtures with NG having the greatest sensitivity to equivalence ratio.
- 22 November 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (3) , 1-17
Extended Testing of the Auto-Ignition Characteristics of Hydrogen–Natural Gas Mixtures for the Safety of Power Plants
A successful transition to global clean energy hinges on meeting the world?s growing demand for power, while at the same time reducing greenhouse gas (GHG) emissions. Achieving this will require significant growth in electricity generation from clean and carbon-free energy sources. Several energy providers [1,2] have already begun the transition from traditional carbon-based fuels to cleaner alternatives, such as hydrogen (H2) and hydrogen-enriched natural gas (HENG). There are still many technical questions/challenges that must be addressed when applying these fuels in gas turbines. The application of H2 or H2/natural gas (NG) blends to advanced class gas turbines, which have higher operating pressures and temperatures, has raised concerns about the potential for leakages or fuel sequencing operations where flammable mixtures of fuel and air could auto-ignite. There was insufficient information in the published literature to characterize the influence of pressure on the AIT of H2 and HENG fuels. This study describes the test methodology used to evaluate conditions where auto-ignition occurs for various fuel-air mixtures operating at different pressures (10 - 30 atm) and temperatures. Testing was completed with NG, 100% H2 and multiple H2/NG blends at various equivalence ratios (ER) between 0.2 – 2.5. At 30 atmospheres, the increased presence of H2 increased the AIT up to 70% H2. At pressures above 10 atm, increased equivalence ratio resulted in reduced AIT for all mixtures with NG having the greatest sensitivity to equivalence ratio.
- 15 November 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (3) , 1-18
Flame Speed Measurements of Ammonia–Hydrogen Mixtures for Gas-Turbines
Ammonia (NH3) is a promising sustainable fuel, as it has historically been shown to provide high energy potential and zero carbon emission. As a hydrogen (H2) carrier, NH3 serves as a possible solution to the U.S. Department of Energy?s Hydrogen Program Plan by providing efficient H2 storage and conservation capabilities. As a result, applied turbine-combustion research of NH3 and H2 fuel has been conducted to identify combustion performance parameters that aid in the design of sustainable turbomachinery. One of these key combustion parameters is the laminar burning speed (LBS). While abundant literature exists on the combustion of NH3 and H2 fuels, there is insufficient evidence in high pressure environments to provide a comprehensive understanding of NH3 and H2 combustion phenomena in turbine combustor settings. The effect of H2 addition to NH3 fuel was observed by comparing the LBS for various NH3-H2 mixture compositions. Experimental results revealed increased LBS values for H2 enriched NH3, with the maximum LBS occurring at stoichiometry. The experimental data were accurately predicted by the UCF NH3-H2 mechanism developed for this investigation, while NUI 1.1 simulations overestimated recorded LBS data by a significant margin. This study demonstrates and quantifies the enhancing effect of H2 addition to NH3 fuels via LBS and strengthens the literature surrounding NH3-H2 combustion reactions for future work.
- 15 November 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (3) , 1-18
Flame Speed Measurements of Ammonia–Hydrogen Mixtures for Gas-Turbines
Ammonia (NH3) is a promising sustainable fuel, as it has historically been shown to provide high energy potential and zero carbon emission. As a hydrogen (H2) carrier, NH3 serves as a possible solution to the U.S. Department of Energy?s Hydrogen Program Plan by providing efficient H2 storage and conservation capabilities. As a result, applied turbine-combustion research of NH3 and H2 fuel has been conducted to identify combustion performance parameters that aid in the design of sustainable turbomachinery. One of these key combustion parameters is the laminar burning speed (LBS). While abundant literature exists on the combustion of NH3 and H2 fuels, there is insufficient evidence in high pressure environments to provide a comprehensive understanding of NH3 and H2 combustion phenomena in turbine combustor settings. The effect of H2 addition to NH3 fuel was observed by comparing the LBS for various NH3-H2 mixture compositions. Experimental results revealed increased LBS values for H2 enriched NH3, with the maximum LBS occurring at stoichiometry. The experimental data were accurately predicted by the UCF NH3-H2 mechanism developed for this investigation, while NUI 1.1 simulations overestimated recorded LBS data by a significant margin. This study demonstrates and quantifies the enhancing effect of H2 addition to NH3 fuels via LBS and strengthens the literature surrounding NH3-H2 combustion reactions for future work.
- 8 December 2022
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 145 (3)
An Experimental Investigation of Supercritical Methane Injection Characteristics in a CO2 Environment
Clean energy generation is gaining significant attention from industries, academia, and governments across the globe. The Allam cycle is one such technology that has been under focus due to its efficiency, environmental friendliness, and economics. This is a direct-fired cycle operating at supercritical conditions using carbon dioxide as a working fluid. Fuel or oxidizer jet mixing with CO2 is a vital phenomenon that governs combustion efficiency, and it is not well understood for the Allam cycle conditions. This paper experimentally investigated the jet characteristics of a methane jet injected into a subcritical to supercritical carbon dioxide environment. A wide range of injection pressures and temperatures were targeted between subcritical to supercritical conditions. Unlike previous studies, the current work focused on injecting lower-density (methane) jets into higher-density (carbon dioxide) environments. Schlieren imaging and methane absorption measurements were simultaneously performed with a CMOS high-speed camera and a 3.39 μm infrared laser. Specifically, we looked at the classical injection parameter of jet spreading angle, which was classically established to be mainly a density ratio function. Here, the jet cone angle was obtained from the postprocessed schlieren imaging. The jet cone angle is a critical characteristic parameter that describes the entrainment rate in a jet; thus, it is a crucial parameter in understanding the nature of the jet. The laser measurements were only used as an additional check to confirm the entry time of methane into the chamber filled with carbon dioxide. Notably, this paper makes a detailed comparison between the jet cone angles of jets with a density ratio. The result showed that the classical correlations, such as Abramovich's theory applied to submerged turbulent gas jets developed for low-density ratio jets, were unsuitable for higher-density ratio jets. It was also observed that the divergence angles were dependent not only on density ratio but also on other parameters such as pressure ratios and reduced pressures.
- 8 December 2022
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 145 (3)
An Experimental Investigation of Supercritical Methane Injection Characteristics in a CO2 Environment
Clean energy generation is gaining significant attention from industries, academia, and governments across the globe. The Allam cycle is one such technology that has been under focus due to its efficiency, environmental friendliness, and economics. This is a direct-fired cycle operating at supercritical conditions using carbon dioxide as a working fluid. Fuel or oxidizer jet mixing with CO2 is a vital phenomenon that governs combustion efficiency, and it is not well understood for the Allam cycle conditions. This paper experimentally investigated the jet characteristics of a methane jet injected into a subcritical to supercritical carbon dioxide environment. A wide range of injection pressures and temperatures were targeted between subcritical to supercritical conditions. Unlike previous studies, the current work focused on injecting lower-density (methane) jets into higher-density (carbon dioxide) environments. Schlieren imaging and methane absorption measurements were simultaneously performed with a CMOS high-speed camera and a 3.39 μm infrared laser. Specifically, we looked at the classical injection parameter of jet spreading angle, which was classically established to be mainly a density ratio function. Here, the jet cone angle was obtained from the postprocessed schlieren imaging. The jet cone angle is a critical characteristic parameter that describes the entrainment rate in a jet; thus, it is a crucial parameter in understanding the nature of the jet. The laser measurements were only used as an additional check to confirm the entry time of methane into the chamber filled with carbon dioxide. Notably, this paper makes a detailed comparison between the jet cone angles of jets with a density ratio. The result showed that the classical correlations, such as Abramovich's theory applied to submerged turbulent gas jets developed for low-density ratio jets, were unsuitable for higher-density ratio jets. It was also observed that the divergence angles were dependent not only on density ratio but also on other parameters such as pressure ratios and reduced pressures.
- 13 May 2022
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 144 (11)
Shock Tube and Flame Speed Measurements of 2,4,4-Trimethyl-1-Pentene: A Co-Optima Biofuel
The combustion of 2,4,4-trimethyl-1-pentene (diisobutylene, C8H16), which is a biofuel and a component of surrogate fuels, is examined in this work. Carbon monoxide time–histories and ignition delay times are collected behind reflected shock waves utilizing a shock tube and mid-infrared laser absorption spectroscopy. Measurements were obtained near 10 atm pressure during stoichiometric oxidation of 0.15%C8H16/O2/Ar. Simulated results from chemical kinetic models are provided, and sensitivity analyses are used to discuss differences between models for both ignition delay times and carbon monoxide formation. In addition, laminar burning speeds are obtained at 1 atm, 428 K, and equivalence ratios, phi, between 0.91 and 1.52 inside a spherical chamber facility. Measured burning speeds are found to be less than that of ethanol over the equivalence ratio span. Burning speed measurements are compared to predictions of chemical kinetic mechanisms and are in agreement for the richest conditions; however, at lean conditions, the model predicts a far slower-burning speed. The maximum burning speed occurs at an equivalence ratio of 1.08 with a magnitude of 0.70 m/s. The current work provides the crucial experimental data needed for assessing the feasibility of this biofuel and for the development of future combustion chemical kinetics models.
- 13 May 2022
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 144 (11)
Shock Tube and Flame Speed Measurements of 2,4,4-Trimethyl-1-Pentene: A Co-Optima Biofuel
The combustion of 2,4,4-trimethyl-1-pentene (diisobutylene, C8H16), which is a biofuel and a component of surrogate fuels, is examined in this work. Carbon monoxide time–histories and ignition delay times are collected behind reflected shock waves utilizing a shock tube and mid-infrared laser absorption spectroscopy. Measurements were obtained near 10 atm pressure during stoichiometric oxidation of 0.15%C8H16/O2/Ar. Simulated results from chemical kinetic models are provided, and sensitivity analyses are used to discuss differences between models for both ignition delay times and carbon monoxide formation. In addition, laminar burning speeds are obtained at 1 atm, 428 K, and equivalence ratios, phi, between 0.91 and 1.52 inside a spherical chamber facility. Measured burning speeds are found to be less than that of ethanol over the equivalence ratio span. Burning speed measurements are compared to predictions of chemical kinetic mechanisms and are in agreement for the richest conditions; however, at lean conditions, the model predicts a far slower-burning speed. The maximum burning speed occurs at an equivalence ratio of 1.08 with a magnitude of 0.70 m/s. The current work provides the crucial experimental data needed for assessing the feasibility of this biofuel and for the development of future combustion chemical kinetics models.