Ramees K. Rahman
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Ramees K. Rahman has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Subith S. Vasu
University of Central Florida
7 shared publications - Michael Pierro
Center for Advanced Turbomachinery and Energy Research (CATER), University of Central Florida (UCF) , Orlando, FL 32816
3 shared publications - Ganesan Subbaraman
GTI Energy , Des Plaines, IL 60018
2 shared publications - Gihun Kim
Center for Advanced Turbomachinery and Energy Research, UCF , Orlando, FL 32816
2 shared publications - Mark Winquist
GTI Energy , Des Plaines, IL 60018
2 shared publications - Robert Steele
Electric Power Research Institute , Charlotte, NC 28262
2 shared publications
Latest Publications
- 22 November 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (3) , 1-17
Extended Testing of the Auto-Ignition Characteristics of Hydrogen–Natural Gas Mixtures for the Safety of Power Plants
A successful transition to global clean energy hinges on meeting the world?s growing demand for power, while at the same time reducing greenhouse gas (GHG) emissions. Achieving this will require significant growth in electricity generation from clean and carbon-free energy sources. Several energy providers [1,2] have already begun the transition from traditional carbon-based fuels to cleaner alternatives, such as hydrogen (H2) and hydrogen-enriched natural gas (HENG). There are still many technical questions/challenges that must be addressed when applying these fuels in gas turbines. The application of H2 or H2/natural gas (NG) blends to advanced class gas turbines, which have higher operating pressures and temperatures, has raised concerns about the potential for leakages or fuel sequencing operations where flammable mixtures of fuel and air could auto-ignite. There was insufficient information in the published literature to characterize the influence of pressure on the AIT of H2 and HENG fuels. This study describes the test methodology used to evaluate conditions where auto-ignition occurs for various fuel-air mixtures operating at different pressures (10 - 30 atm) and temperatures. Testing was completed with NG, 100% H2 and multiple H2/NG blends at various equivalence ratios (ER) between 0.2 – 2.5. At 30 atmospheres, the increased presence of H2 increased the AIT up to 70% H2. At pressures above 10 atm, increased equivalence ratio resulted in reduced AIT for all mixtures with NG having the greatest sensitivity to equivalence ratio.
- 22 November 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (3) , 1-17
Extended Testing of the Auto-Ignition Characteristics of Hydrogen–Natural Gas Mixtures for the Safety of Power Plants
A successful transition to global clean energy hinges on meeting the world?s growing demand for power, while at the same time reducing greenhouse gas (GHG) emissions. Achieving this will require significant growth in electricity generation from clean and carbon-free energy sources. Several energy providers [1,2] have already begun the transition from traditional carbon-based fuels to cleaner alternatives, such as hydrogen (H2) and hydrogen-enriched natural gas (HENG). There are still many technical questions/challenges that must be addressed when applying these fuels in gas turbines. The application of H2 or H2/natural gas (NG) blends to advanced class gas turbines, which have higher operating pressures and temperatures, has raised concerns about the potential for leakages or fuel sequencing operations where flammable mixtures of fuel and air could auto-ignite. There was insufficient information in the published literature to characterize the influence of pressure on the AIT of H2 and HENG fuels. This study describes the test methodology used to evaluate conditions where auto-ignition occurs for various fuel-air mixtures operating at different pressures (10 - 30 atm) and temperatures. Testing was completed with NG, 100% H2 and multiple H2/NG blends at various equivalence ratios (ER) between 0.2 – 2.5. At 30 atmospheres, the increased presence of H2 increased the AIT up to 70% H2. At pressures above 10 atm, increased equivalence ratio resulted in reduced AIT for all mixtures with NG having the greatest sensitivity to equivalence ratio.
- 15 November 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (3) , 1-18
Flame Speed Measurements of Ammonia–Hydrogen Mixtures for Gas-Turbines
Ammonia (NH3) is a promising sustainable fuel, as it has historically been shown to provide high energy potential and zero carbon emission. As a hydrogen (H2) carrier, NH3 serves as a possible solution to the U.S. Department of Energy?s Hydrogen Program Plan by providing efficient H2 storage and conservation capabilities. As a result, applied turbine-combustion research of NH3 and H2 fuel has been conducted to identify combustion performance parameters that aid in the design of sustainable turbomachinery. One of these key combustion parameters is the laminar burning speed (LBS). While abundant literature exists on the combustion of NH3 and H2 fuels, there is insufficient evidence in high pressure environments to provide a comprehensive understanding of NH3 and H2 combustion phenomena in turbine combustor settings. The effect of H2 addition to NH3 fuel was observed by comparing the LBS for various NH3-H2 mixture compositions. Experimental results revealed increased LBS values for H2 enriched NH3, with the maximum LBS occurring at stoichiometry. The experimental data were accurately predicted by the UCF NH3-H2 mechanism developed for this investigation, while NUI 1.1 simulations overestimated recorded LBS data by a significant margin. This study demonstrates and quantifies the enhancing effect of H2 addition to NH3 fuels via LBS and strengthens the literature surrounding NH3-H2 combustion reactions for future work.
- 15 November 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (3) , 1-18
Flame Speed Measurements of Ammonia–Hydrogen Mixtures for Gas-Turbines
Ammonia (NH3) is a promising sustainable fuel, as it has historically been shown to provide high energy potential and zero carbon emission. As a hydrogen (H2) carrier, NH3 serves as a possible solution to the U.S. Department of Energy?s Hydrogen Program Plan by providing efficient H2 storage and conservation capabilities. As a result, applied turbine-combustion research of NH3 and H2 fuel has been conducted to identify combustion performance parameters that aid in the design of sustainable turbomachinery. One of these key combustion parameters is the laminar burning speed (LBS). While abundant literature exists on the combustion of NH3 and H2 fuels, there is insufficient evidence in high pressure environments to provide a comprehensive understanding of NH3 and H2 combustion phenomena in turbine combustor settings. The effect of H2 addition to NH3 fuel was observed by comparing the LBS for various NH3-H2 mixture compositions. Experimental results revealed increased LBS values for H2 enriched NH3, with the maximum LBS occurring at stoichiometry. The experimental data were accurately predicted by the UCF NH3-H2 mechanism developed for this investigation, while NUI 1.1 simulations overestimated recorded LBS data by a significant margin. This study demonstrates and quantifies the enhancing effect of H2 addition to NH3 fuels via LBS and strengthens the literature surrounding NH3-H2 combustion reactions for future work.
- 26 October 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (2) , 1-17
An Optimized and Reduced Chemical Kinetic Model for Hydrogen and Natural Gas Blends Combustion in Industrial Gas Turbines
Natural gas is one of the common fuels that is used in gas turbines for power generation. Due to its interest in power generation and other applications, there are several chemical kinetic models available in the literature for natural gas. The power generation sector is moving toward decarbonization and there has been increased interest in replacing conventional fuels with fuels that produce less/zero carbon emissions like hydrogen. Pure hydrogen has a very wide flammability range and poses risks related to flashback and high thermal NOx production. Blending hydrogen with natural gas helps in having better control over the fuel properties. However, the literature lacks well-validated chemical kinetic models for the combustion of hydrogen blended natural gas for undilute mixtures at gas turbine-relevant conditions (8–16 bar). Hence, in this work, we develop a detailed chemical kinetic model for hydrogen-blended natural gas and validate it with a wide range of experimental data for both dilute and undilute mixtures relevant to gas turbine operating conditions. We outline the strengths and weaknesses of the current mechanism to aid future users of our chemical kinetic mechanism. The detailed chemical kinetic mechanism is then reduced to two smaller versions (60 species and 44 species mechanisms) without significant loss in accuracy using Directed Relation Graph with Error Propagation (DRGEP). To improve the prediction for pure hydrogen combustion while retaining all other predictive capabilities, an optimization is carried out for the most sensitive reactions for hydrogen combustion. The resultant mechanism can predict a wide range of experimental results with the least cumulative error.
- 26 October 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (2) , 1-17
An Optimized and Reduced Chemical Kinetic Model for Hydrogen and Natural Gas Blends Combustion in Industrial Gas Turbines
Natural gas is one of the common fuels that is used in gas turbines for power generation. Due to its interest in power generation and other applications, there are several chemical kinetic models available in the literature for natural gas. The power generation sector is moving toward decarbonization and there has been increased interest in replacing conventional fuels with fuels that produce less/zero carbon emissions like hydrogen. Pure hydrogen has a very wide flammability range and poses risks related to flashback and high thermal NOx production. Blending hydrogen with natural gas helps in having better control over the fuel properties. However, the literature lacks well-validated chemical kinetic models for the combustion of hydrogen blended natural gas for undilute mixtures at gas turbine-relevant conditions (8–16 bar). Hence, in this work, we develop a detailed chemical kinetic model for hydrogen-blended natural gas and validate it with a wide range of experimental data for both dilute and undilute mixtures relevant to gas turbine operating conditions. We outline the strengths and weaknesses of the current mechanism to aid future users of our chemical kinetic mechanism. The detailed chemical kinetic mechanism is then reduced to two smaller versions (60 species and 44 species mechanisms) without significant loss in accuracy using Directed Relation Graph with Error Propagation (DRGEP). To improve the prediction for pure hydrogen combustion while retaining all other predictive capabilities, an optimization is carried out for the most sensitive reactions for hydrogen combustion. The resultant mechanism can predict a wide range of experimental results with the least cumulative error.
- 26 October 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (2) , 1-22
Development of Detailed and Reduced Chemical Kinetic Models for Ammonia Gas Turbines
The power generation sector has been recently moving toward decarbonization, and there is an increased interest in replacing conventional fossil fuels with fuels that produce reduced/zero carbon emissions. One such fuel is ammonia (NH3). However, ammonia is hard to ignite, has a low flame speed, and produces a significantly large amount of nitrogen oxide (NOx) emissions. Hence, using 100% ammonia as fuel in gas turbines requires significant modifications and the development of novel combustors. Blending hydrogen with ammonia, however, helps in having better control over the combustion properties. For example, a 70%/30% mixture of NH3/H2 mixture has a flame speed comparable to natural gas. Before utilizing hydrogen-blended ammonia in an actual gas turbine combustor, thorough simulation studies are required to evaluate its performance, possible hazards, and emissions. The literature lacks well-validated chemical kinetic models for the combustion of hydrogen-blended ammonia for undiluted mixtures at gas turbine-relevant conditions (∼20 bar). Most models available in the literature have been developed for ammonia extremely diluted in diluents such as argon or nitrogen. Hence, in this work, we develop a detailed chemical kinetic model for hydrogen-blended ammonia combustion and validate it with a wide range of experimental data for both dilute and undiluted mixtures relevant to gas turbine operating conditions. We outline the strengths and weaknesses of the current mechanism to aid future users of our chemical kinetic mechanism. The detailed chemical kinetic mechanism was reduced to a smaller version (32 species mechanism) without significant loss in accuracy using the directed relation graph with error propagation (DRGEP) and full species sensitivity analysis. The resultant mechanism can predict a wide range of experimental results with the least cumulative error and will be a valuable tool in computational fluid dynamics (CFD) simulations that will enable the development of gas turbines for zero-carbon power generation.
- 26 October 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (2) , 1-22
Development of Detailed and Reduced Chemical Kinetic Models for Ammonia Gas Turbines
The power generation sector has been recently moving toward decarbonization, and there is an increased interest in replacing conventional fossil fuels with fuels that produce reduced/zero carbon emissions. One such fuel is ammonia (NH3). However, ammonia is hard to ignite, has a low flame speed, and produces a significantly large amount of nitrogen oxide (NOx) emissions. Hence, using 100% ammonia as fuel in gas turbines requires significant modifications and the development of novel combustors. Blending hydrogen with ammonia, however, helps in having better control over the combustion properties. For example, a 70%/30% mixture of NH3/H2 mixture has a flame speed comparable to natural gas. Before utilizing hydrogen-blended ammonia in an actual gas turbine combustor, thorough simulation studies are required to evaluate its performance, possible hazards, and emissions. The literature lacks well-validated chemical kinetic models for the combustion of hydrogen-blended ammonia for undiluted mixtures at gas turbine-relevant conditions (∼20 bar). Most models available in the literature have been developed for ammonia extremely diluted in diluents such as argon or nitrogen. Hence, in this work, we develop a detailed chemical kinetic model for hydrogen-blended ammonia combustion and validate it with a wide range of experimental data for both dilute and undiluted mixtures relevant to gas turbine operating conditions. We outline the strengths and weaknesses of the current mechanism to aid future users of our chemical kinetic mechanism. The detailed chemical kinetic mechanism was reduced to a smaller version (32 species mechanism) without significant loss in accuracy using the directed relation graph with error propagation (DRGEP) and full species sensitivity analysis. The resultant mechanism can predict a wide range of experimental results with the least cumulative error and will be a valuable tool in computational fluid dynamics (CFD) simulations that will enable the development of gas turbines for zero-carbon power generation.
- 1 September 2024
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 62 (9) , 3314-3325
Shock-Tube Measurements of Carbon Monoxide During Combustion of Hydroxyl-Terminated Polybutadiene Products/Air
- 1 September 2024
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 62 (9) , 3314-3325
Shock-Tube Measurements of Carbon Monoxide During Combustion of Hydroxyl-Terminated Polybutadiene Products/Air
- 4 January 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 146 (6) , 1-11
Ignition Delay Times and Chemical Kinetic Model Validation for Hydrogen and Ammonia Blending With Natural Gas at Gas Turbine Relevant Conditions
Ignition delay times from undiluted mixtures of natural gas (NG)/H2/Air and NG/NH3/Air were measured using a high-pressure shock tube at the University of Central Florida. The combustion temperatures were experimentally tested between 1000-1500 K near a constant pressure of 25 bar. As mentioned, mixtures were kept undiluted to replicate the same chemistry pathways seen in gas turbine combustion chambers. Recorded combustion pressures exceeded 200 bar due to the large energy release, hence why these were performed at the high-pressure shock tube facility. The data is compared to the predictions of the NUIGMech 1.1 mechanism for chemical kinetic model validation and refinement. An exceptional agreement was shown for stoichiometric conditions in all cases but strayed at lean and rich equivalence ratios, especially in the lower temperature regime of H2 addition and all temperature ranges of the baseline NG mixture. Hydrogen addition also decreased ignition delay times by nearly 90%, while NH3 fuel addition made no noticeable difference in ignition time. NG/NH3 exhibited similar chemistry to pure NG under the same conditions, which is shown in a sensitivity analysis. The reaction CH3 + O2 = CH3O + O is identified and suggested as a possible modification target to improve model performance. Increasing the robustness of chemical kinetic models via experimental validation will directly aid in designing next-generation combustion chambers for use in gas turbines, which in turn will greatly lower global emissions and reduce greenhouse effects.
- 4 January 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 146 (6) , 1-11
Ignition Delay Times and Chemical Kinetic Model Validation for Hydrogen and Ammonia Blending With Natural Gas at Gas Turbine Relevant Conditions
Ignition delay times from undiluted mixtures of natural gas (NG)/H2/Air and NG/NH3/Air were measured using a high-pressure shock tube at the University of Central Florida. The combustion temperatures were experimentally tested between 1000-1500 K near a constant pressure of 25 bar. As mentioned, mixtures were kept undiluted to replicate the same chemistry pathways seen in gas turbine combustion chambers. Recorded combustion pressures exceeded 200 bar due to the large energy release, hence why these were performed at the high-pressure shock tube facility. The data is compared to the predictions of the NUIGMech 1.1 mechanism for chemical kinetic model validation and refinement. An exceptional agreement was shown for stoichiometric conditions in all cases but strayed at lean and rich equivalence ratios, especially in the lower temperature regime of H2 addition and all temperature ranges of the baseline NG mixture. Hydrogen addition also decreased ignition delay times by nearly 90%, while NH3 fuel addition made no noticeable difference in ignition time. NG/NH3 exhibited similar chemistry to pure NG under the same conditions, which is shown in a sensitivity analysis. The reaction CH3 + O2 = CH3O + O is identified and suggested as a possible modification target to improve model performance. Increasing the robustness of chemical kinetic models via experimental validation will directly aid in designing next-generation combustion chambers for use in gas turbines, which in turn will greatly lower global emissions and reduce greenhouse effects.
- 8 December 2022
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 145 (4)
Experimental Ignition Delay Time Measurements and Chemical Kinetics Modeling of Hydrogen/Ammonia/Natural Gas Fuels
In recent years, hydrogen-carrying compounds have accrued interest as an alternative to traditional fossil fuels due to their function as zero-emission fuels. As such, there is interest in investigating hydrogen-carrying compounds to improve understanding of the fuels' characteristics for use in high pressure systems. In the current study, the oxidation of ammonia/natural gas/hydrogen mixtures was carried out to study carbon monoxide (CO) formation profiles as well as the ignition delay times (IDTs) behind reflected shock waves in order to refine chemical kinetic models. Experiments were carried out in the University of Central Florida's shock tube facility by utilizing chemiluminescence to obtain OH* emission and laser absorption spectroscopy to obtain CO profiles over a temperature range between 1200 K and 1800 K with an average pressure of 2.2 atm. Experimental mixtures included both neat and combination natural gas/hydrogen with ammonia addition, with all mixtures except one having an equivalence ratio of 1. Results were then compared with the GRI 3.0 mechanism, as well as the newly developed UCF 2022 mechanism utilizing chemkin-pro software. In general, both models were able to capture the trend in auto-ignition delay times and CO time histories for natural gas and ammonia mixtures. However, for ammonia–hydrogen mixtures, GRI 3.0 failed to predict ignition delay times, whereas the UCF 2022 mechanism was able to capture the IDTs within the uncertainty limits of the experiments. A sensitivity analysis was conducted for different mixtures to understand the important reactions at the experimental conditions. Finally, a reaction pathway analysis was carried out to understand important ammonia decomposition pathways in the presence of hydrogen and natural gas.
- 8 December 2022
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 145 (4)
Experimental Ignition Delay Time Measurements and Chemical Kinetics Modeling of Hydrogen/Ammonia/Natural Gas Fuels
In recent years, hydrogen-carrying compounds have accrued interest as an alternative to traditional fossil fuels due to their function as zero-emission fuels. As such, there is interest in investigating hydrogen-carrying compounds to improve understanding of the fuels' characteristics for use in high pressure systems. In the current study, the oxidation of ammonia/natural gas/hydrogen mixtures was carried out to study carbon monoxide (CO) formation profiles as well as the ignition delay times (IDTs) behind reflected shock waves in order to refine chemical kinetic models. Experiments were carried out in the University of Central Florida's shock tube facility by utilizing chemiluminescence to obtain OH* emission and laser absorption spectroscopy to obtain CO profiles over a temperature range between 1200 K and 1800 K with an average pressure of 2.2 atm. Experimental mixtures included both neat and combination natural gas/hydrogen with ammonia addition, with all mixtures except one having an equivalence ratio of 1. Results were then compared with the GRI 3.0 mechanism, as well as the newly developed UCF 2022 mechanism utilizing chemkin-pro software. In general, both models were able to capture the trend in auto-ignition delay times and CO time histories for natural gas and ammonia mixtures. However, for ammonia–hydrogen mixtures, GRI 3.0 failed to predict ignition delay times, whereas the UCF 2022 mechanism was able to capture the IDTs within the uncertainty limits of the experiments. A sensitivity analysis was conducted for different mixtures to understand the important reactions at the experimental conditions. Finally, a reaction pathway analysis was carried out to understand important ammonia decomposition pathways in the presence of hydrogen and natural gas.