JZJuan Zhang

Juan Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Juan Zhang has a total of 78 co-authors. Here are the top co-authors by number of shared publications:

  • Yu-Guo Guo

    CAS Key Laboratory of Molecular Nanostructure and Nanotechnology Beijing National Laboratory for Molecular Sciences (BNLMS) Institute of Chemistry, Chinese Academy of Sciences (CAS) Beijing 100190 P.R. China

    12 shared publications
  • Sen Xin

    Chinese Academy of Sciences

    9 shared publications
  • Shuang‐Jie Tan

    CAS Key Laboratory of Molecular Nanostructure and Nanotechnology, Beijing National Laboratory for Molecular Sciences (BNLMS), Institute of Chemistry, Chinese Academy of Sciences (CAS), Beijing 100190, P. R. China

    8 shared publications
  • Chao‐Hui Zhang

    CAS Key Laboratory of Molecular Nanostructure and Nanotechnology CAS Research/Education Centre for Excellence in Molecular Sciences Beijing National Laboratory for Molecular Sciences (BNLMS) Institute of Chemistry Chinese Academy of Sciences (CAS) 100190 Beijing P. R. China

    5 shared publications
  • Jia Chou

    CAS Key Laboratory of Molecular Nanostructure and Nanotechnology CAS Research/Education Centre for Excellence in Molecular Sciences Beijing National Laboratory for Molecular Sciences (BNLMS) Institute of Chemistry Chinese Academy of Sciences (CAS) 100190 Beijing P. R. China

    5 shared publications
  • Li-Jun Wan

    Beijing National Laboratory for Molecular Sciences (BNLMS)

    4 shared publications

Latest Publications

  • Open Access

    A Li metal-SiO x hybrid anode enabling synergistic plating/alloying dual-mechanism lithium storage

    by Chao-Hui Zhang, Juan Zhang, Yu-Hao Wang, Shuang-Jie Tan, Yu-Jie Guo, Jun-Chen Guo, Xiao-Xi Luo, Jian-Song Wu, Sen Xin, Li-Jun Wan, et al.

    Balancing specific energy and cycle durability remains a critical challenge for practical battery systems, as conventional single-mechanism anodes struggle to optimize both simultaneously. Here, we engineer a symbiotic Li-SiO x hybrid anode enabling spatiotemporally coordinated Li metal plating and Li-ion alloying. The preferential lithiated Li x Si forms a Li + -conductive network, guiding and confining lithium nucleation beneath the SiO x layer. This precise control over Li plating replenishes active lithium inventory, stabilizing electrochemical reactions and minimizing Li loss. When paired with a LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathode (4 milliampere-hours per square centimeter), the full cell achieves 50% higher specific energy than SiO x -based lithium-ion batteries while retaining 80% capacity after 900 cycles at a lean negative/positive ratio of 1.5, outperforming state-of-the-art Li-ion and Li-metal battery systems. A pouch cell exhibits stable cycling over 600 cycles at 0.5C, validating its practicality. Our findings pioneered a universal hybrid anode design paradigm with coupled reaction mechanisms, effectively addressing the longstanding energy durability trade-off in next-generation batteries.

  • Open Access

    Engineering thin 3D Li-composite foil negative electrodes with high mechanical toughness

    by Yu-Hao Wang, Shuang-Jie Tan, Chao-Hui Zhang, Jun-Chen Guo, Xiao-Xi Luo, Ruo-Xi Jin, Lin-Bo Huang, Xiao-Chuan Su, Chen Li, Xu-Sheng Zhang, et al.

    Current three-dimensional lithium negative electrodes are plagued by inherent trade-offs among mechanical robustness, thin processability, and electrochemical performance. Here, we engineer a free-standing Li-composite foil negative electrodes by integrating a lithiophilic Li-Zn alloy with a Li 3 N-enriched carbon nanotube network. The Li-Zn alloy strengthens tensile resistance and regulates lithium deposition, while the Li 3 N-enriched carbon nanotube network reinforces mechanical toughness, achieving a rupture toughness of 1.3 × 10⁶ J/m³, a 12-fold enhancement over bare lithium. This property enables the fabrication of thin negative electrodes (500 cycles in coin cells at 1 C, 92% retention after 300 cycles in Ah-grade pouch cells at 0.5 C) and sustain high-rate operation (10 C). An 8.5 Ah pouch cell demonstrates a practical specific energy of 553 Wh kg −1 at cell level when tested at 0.1 C. This work presents a design strategy for realizing high-energy, long-cycle-life lithium metal batteries.


  • Open Access

    Phase Engineering of Lithium Silicate in SiO x Anodes for Fast-Charging Lithium-Ion Batteries

    by Han-Xian Chen, Di-Xin Xu, Ge Li, Shu-Hao Xiao, Zhuo-Ya Lu, Wan-Li Wang, Wen-Peng Wang, Ji-Lei Shi, Juan Zhang, Yu-Guo Guo

    The development of high-energy-density anodes capable of withstanding fast-charging conditions remains a significant challenge for lithium-ion batteries. Silicon monoxide (SiOx) is a promising candidate, yet its performance intrinsically depends on the structure of the lithium silicate matrix formed during the initial lithiation. Herein, we demonstrate that the lithiation method, chemical versus electrochemical, serves as a powerful tool for the precise phase engineering of this silicate component. We selectively synthesized Li2Si2O5, Li2SiO3, and Li4SiO4, establishing that the [NBO]/[Si] ratio is the key descriptor for Li-ion transport kinetics. Multiscale simulations confirm that nonbridging oxygen (NBO) sites provide low-energy migration pathways, whereas bridging oxygen (BO) sites impede ion mobility. The electrochemically derived Li4SiO4 phase, which possesses the highest [NBO]/[Si] ratio, consequently enables a superior fast-charging performance. Practical validation using 2-Ah pouch cells demonstrates 85% capacity retention after 300 cycles at 4C (15-min charging). This work establishes lithiation engineering as a fundamental strategy for developing high-performance SiOx anodes, transforming it from a simple pretreatment into a critical design parameter for fast-charging batteries.


  • Open Access

    An ultralight, pulverization-free integrated anode toward lithium-less lithium metal batteries

    by Chao-Hui Zhang, Yu-Jie Guo, Shuang-Jie Tan, Yu-Hao Wang, Jun-Chen Guo, Yi-Fan Tian, Xu-Sheng Zhang, Bo-Zheng Liu, Sen Xin, Juan Zhang, et al.

    The high-capacity advantage of lithium metal anode was compromised by common use of copper as the collector. Furthermore, lithium pulverization associated with “dead” Li accumulation and electrode cracking deteriorates the long-term cyclability of lithium metal batteries, especially under realistic test conditions. Here, we report an ultralight, integrated anode of polyimide-Ag/Li with dual anti-pulverization functionality. The silver layer was initially chemically bonded to the polyimide surface and then spontaneously diffused in Li solid solution and self-evolved into a fully lithiophilic Li-Ag phase, mitigating dendrites growth or dead Li. Further, the strong van der Waals interaction between the bottommost Li-Ag and polyimide affords electrode structural integrity and electrical continuity, thus circumventing electrode pulverization. Compared to the cutting-edge anode-free cells, the batteries pairing LiNi 0.8 Mn 0.1 Co 0.1 O 2 with polyimide-Ag/Li afford a nearly 10% increase in specific energy, with safer characteristics and better cycling stability under realistic conditions of 1× excess Li and high areal-loading cathode (4 milliampere hour per square centimeter).


  • A Fully Amorphous, Dynamic Cross‐Linked Polymer Electrolyte for Lithium‐Sulfur Batteries Operating at Subzero‐Temperatures

    by Juan Zhang, Jia Chou, Xiao‐Xi Luo, Yi‐Ming Yang, Ming‐Yan Yan, Di Jia, Chao‐Hui Zhang, Ya‐Hui Wang, Wen‐Peng Wang, Shuang‐Jie Tan, et al.

    Solid‐state lithium‐sulfur batteries have shown prospects as safe, high‐energy electrochemical storage technology for powering regional electrified transportation. Owing to limited ion mobility in crystalline polymer electrolytes, the battery is incapable of operating at subzero temperature. Addition of liquid plasticizer into the polymer electrolyte improves the Li‐ion conductivity yet sacrifices the mechanical strength and interfacial stability with both electrodes. In this work, we showed that by introducing a spherical hyperbranched solid polymer plasticizer into a Li+‐conductive linear polymer matrix, an integrated dynamic cross‐linked polymer network was built to maintain fully amorphous in a wide temperature range down to subzero. A quasi‐solid polymer electrolyte with a solid mass content >90 % was prepared from the cross‐linked polymer network, and demonstrated fast Li+ conduction at a low temperature, high mechanical strength, and stable interfacial chemistry. As a result, solid‐state lithium‐sulfur batteries employing the new electrolyte delivered high reversible capacity and long cycle life at 25 °C, 0 °C and −10 °C to serve energy storage at complex environmental conditions.


  • A Fully Amorphous, Dynamic Cross‐Linked Polymer Electrolyte for Lithium‐Sulfur Batteries Operating at Subzero‐Temperatures

    by Juan Zhang, Jia Chou, Xiao‐Xi Luo, Yi‐Ming Yang, Ming‐Yan Yan, Di Jia, Chao‐Hui Zhang, Ya‐Hui Wang, Wen‐Peng Wang, Shuang‐Jie Tan, et al.

    Solid‐state lithium‐sulfur batteries have shown prospects as safe, high‐energy electrochemical storage technology for powering regional electrified transportation. Owing to limited ion mobility in crystalline polymer electrolytes, the battery is incapable of operating at subzero temperature. Addition of liquid plasticizer into the polymer electrolyte improves the Li‐ion conductivity yet sacrifices the mechanical strength and interfacial stability with both electrodes. In this work, we showed that by introducing a spherical hyperbranched solid polymer plasticizer into a Li+‐conductive linear polymer matrix, an integrated dynamic cross‐linked polymer network was built to maintain fully amorphous in a wide temperature range down to subzero. A quasi‐solid polymer electrolyte with a solid mass content >90 % was prepared from the cross‐linked polymer network, and demonstrated fast Li+ conduction at a low temperature, high mechanical strength, and stable interfacial chemistry. As a result, solid‐state lithium‐sulfur batteries employing the new electrolyte delivered high reversible capacity and long cycle life at 25 °C, 0 °C and −10 °C to serve energy storage at complex environmental conditions.


  • Insights into Anion‐Solvent Interactions to Boost Stable Operation of Ether‐Based Electrolytes in Pure‐SiOx||LiNi0.8Mn0.1Co0.1O2 Full Cells

    by Yi‐Fan Tian, Shuang‐Jie Tan, Zhuo‐Ya Lu, Di‐Xin Xu, Han‐Xian Chen, Chao‐Hui Zhang, Xu‐Sheng Zhang, Ge Li, Yu‐Ming Zhao, Wan‐Ping Chen, et al.

    Ether solvents with superior reductive stability promise excellent interphasial stability with high‐capacity anodes while the limited oxidative resistance hinders their high‐voltage operation. Extending the intrinsic electrochemical stability of ether‐based electrolytes to construct stable‐cycling high‐energy‐density lithium‐ion batteries is challenging but rewarding. Herein, the anion‐solvent interactions were concerned as the key point to optimize the anodic stability of the ether‐based electrolytes and an optimized interphase was realized on both pure‐SiOx anodes and LiNi0.8Mn0.1Co0.1O2 cathodes. Specifically, the small‐anion‐size LiNO3 and tetrahydrofuran with high dipole moment to dielectric constant ratio realized strengthened anion‐solvent interactions, which enhance the oxidative stability of the electrolyte. The designed ether‐based electrolyte enabled a stable cycling performance over 500 cycles in pure‐SiOx||LiNi0.8Mn0.1Co0.1O2 full cell, demonstrating its superior practical prospects. This work provides new insight into the design of new electrolytes for emerging high‐energy density lithium‐ion batteries through the regulation of interactions between species in electrolytes.


  • Insights into Anion‐Solvent Interactions to Boost Stable Operation of Ether‐Based Electrolytes in Pure‐SiOx||LiNi0.8Mn0.1Co0.1O2 Full Cells

    by Yi‐Fan Tian, Shuang‐Jie Tan, Zhuo‐Ya Lu, Di‐Xin Xu, Han‐Xian Chen, Chao‐Hui Zhang, Xu‐Sheng Zhang, Ge Li, Yu‐Ming Zhao, Wan‐Ping Chen, et al.

    Ether solvents with superior reductive stability promise excellent interphasial stability with high‐capacity anodes while the limited oxidative resistance hinders their high‐voltage operation. Extending the intrinsic electrochemical stability of ether‐based electrolytes to construct stable‐cycling high‐energy‐density lithium‐ion batteries is challenging but rewarding. Herein, the anion‐solvent interactions were concerned as the key point to optimize the anodic stability of the ether‐based electrolytes and an optimized interphase was realized on both pure‐SiOx anodes and LiNi0.8Mn0.1Co0.1O2 cathodes. Specifically, the small‐anion‐size LiNO3 and tetrahydrofuran with high dipole moment to dielectric constant ratio realized strengthened anion‐solvent interactions, which enhance the oxidative stability of the electrolyte. The designed ether‐based electrolyte enabled a stable cycling performance over 500 cycles in pure‐SiOx||LiNi0.8Mn0.1Co0.1O2 full cell, demonstrating its superior practical prospects. This work provides new insight into the design of new electrolytes for emerging high‐energy density lithium‐ion batteries through the regulation of interactions between species in electrolytes.


  • A dual protection strategy for stable lithium metal anodes using Ag nanoseed decorated F-doped porous graphene current collectors

    by Yang Yan, Jing Sun, Ying Zhang, Wen Liu, Yu-Jie Wang, Hui-Qin Yang, Cheng-Jie Li, Juan Zhang

    Lithium metal batteries have been regarded as typical representatives of high-energy storage systems. However, lithium dendrite growth and a fragile solid electrolyte interface (SEI) lead to safety issues and unsatisfactory performances. We tackle the above issues with a dual protection strategy by designing a silver (Ag) decorated F-doped graphene (Ag@FG) matrix. Ag@FG was synthesized by a one-step “ion atmosphere” method. When used as a current collector, Ag@FG shows a low nucleation overpotential and a long cycle life due to the enhanced lithiophilicity, high conductivity of the matrix, and the LiF-enriched SEI. The decorated Ag nanoparticles increased the lithiophilicity of the graphene matrix to induce the uniform deposition of lithium. The doped F leads to the formation of a stable SEI. Thus, Ag@FG shows a low nucleation overpotential of only 8 mV at 0.5 mA cm−2 and long-term stability for over 1600 h at 1.0 mA cm−2 and 1.0 mA h cm−2. The assembled full batteries with LFP also indicate its practicability with good cycling stability and rate capability.


  • A Self‐Reconfigured, Dual‐Layered Artificial Interphase Toward High‐Current‐Density Quasi‐Solid‐State Lithium Metal Batteries

    by Jun‐Chen Guo, Shuang‐Jie Tan, Chao‐Hui Zhang, Wen‐Peng Wang, Yao Zhao, Fuyi Wang, Xu‐Sheng Zhang, Rui Wen, Ying Zhang, Min Fan, et al.

    The uncontrollable dendrite growth and unstable solid electrolyte interphase have long plagued the practical application of Li metal batteries. Herein, a dual‐layered artificial interphase LiF/LiBO–Ag is demonstrated that is simultaneously reconfigured via an electrochemical process to stabilize the lithium anode. This dual‐layered interphase consists of a heterogeneous LiF/LiBO glassy top layer with ultrafast Li‐ion conductivity and lithiophilic Li–Ag alloy bottom layer, which synergistically regulates the dendrite‐free Li deposition, even at high current densities. As a result, Li||Li symmetric cells with LiF/LiBO–Ag interphase achieve an ultralong lifespan (4500 h) at an ultrahigh current density and area capacity (20 mA cm−2, 20 mAh cm−2). LiF/LiBO–Ag@Li anodes are successfully applied in quasi‐solid‐state batteries, showing excellent cycling performances in symmetric cells (8 mA cm−2, 8 mAh cm−2, 5000 h) and full cells. Furthermore, a practical quasi‐solid‐state pouch cell coupling with a high‐nickel cathode exhibits stable cycling with a capacity retention of over 91% after 60 cycles at 0.5 C, which is comparable or even better than that in liquid‐state pouch cells. Additionally, a high‐energy‐density quasi‐solid‐state pouch cell (10.75 Ah, 448.7 Wh kg−1) is successfully accomplished. This well‐orchestrated interphase design provides new guidance in engineering highly stable interphase toward practical high‐energy‐density lithium metal batteries.