Vignesh Sompur
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Vignesh Sompur has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Varadhan Skm
Department of Applied Mechanics and Biomedical Engineering, Indian Institute of Technology Madras, Chennai, India
3 shared publications - Asokan Thondiyath
Indian Institute of Technology Madras
1 shared publication - Asokan Thondiyath
Department of Engineering Design, Indian Institute of Technology Madras, Chennai 600036, India
1 shared publication - Prajwal Shenoy
Department of Mechatronics, Manipal Institute of Technology, Manipal Academy of Higher Education (MAHE), Manipal, Karnataka, India
1 shared publication
Latest Publications
- Open Access
- 21 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 96517-96534
Underactuated Finger Design: A Minimalistic Approach Toward Biomimetic Prosthetic Finger
Dexterous prosthetic hands with a simple design are the need of the hour. The limiting factor for prosthetic hands is the structure, functionality, and control of the fingers and the thumb. Traditionally, robotic fingers used in prosthetic hands are tendon-driven or have linkage-based mechanisms. While tendon-driven mechanisms provide anthropomorphic behaviour, they lack sufficient grip force. In contrast, linkage mechanisms develop sufficient grip force but at the expense of the size and weight of the overall design. Further, a linkage-based mechanism provides only shape adaptation without joint coupling. To address this gap in prosthetic finger design, we propose a novel underactuated, hybrid, and minimalistic finger mechanism to achieve simultaneous coupling and self-adaptation. The designed finger mechanism has three degrees of freedom provided by two 4-bar mechanisms in series, with two degrees of actuation. The finger is actuated through a pair of inelastic tendons acting on two joints. The tendon architecture is bio-inspired and improves the finger mechanism’s anthropomorphic behaviour. A detailed kinematic and static analysis is provided to describe the finger design’s operating principle and construction. Simulations of fingertip trajectory and contact forces are also performed. Additionally, a prototype of the mechanism was 3D printed to validate the design of the finger. Grasping simulations and experiments were also performed for a typical 4-bar-based finger mechanism. The results show improved anthropomorphic motion and increased contact forces for the current finger design compared to the conventional 4-bar mechanism-based prosthetic finger.
- 21 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 96517-96534
Open AccessUnderactuated Finger Design: A Minimalistic Approach Toward Biomimetic Prosthetic Finger
Dexterous prosthetic hands with a simple design are the need of the hour. The limiting factor for prosthetic hands is the structure, functionality, and control of the fingers and the thumb. Traditionally, robotic fingers used in prosthetic hands are tendon-driven or have linkage-based mechanisms. While tendon-driven mechanisms provide anthropomorphic behaviour, they lack sufficient grip force. In contrast, linkage mechanisms develop sufficient grip force but at the expense of the size and weight of the overall design. Further, a linkage-based mechanism provides only shape adaptation without joint coupling. To address this gap in prosthetic finger design, we propose a novel underactuated, hybrid, and minimalistic finger mechanism to achieve simultaneous coupling and self-adaptation. The designed finger mechanism has three degrees of freedom provided by two 4-bar mechanisms in series, with two degrees of actuation. The finger is actuated through a pair of inelastic tendons acting on two joints. The tendon architecture is bio-inspired and improves the finger mechanism’s anthropomorphic behaviour. A detailed kinematic and static analysis is provided to describe the finger design’s operating principle and construction. Simulations of fingertip trajectory and contact forces are also performed. Additionally, a prototype of the mechanism was 3D printed to validate the design of the finger. Grasping simulations and experiments were also performed for a typical 4-bar-based finger mechanism. The results show improved anthropomorphic motion and increased contact forces for the current finger design compared to the conventional 4-bar mechanism-based prosthetic finger.
- Open Access
- 15 March 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (6) , 3214
Mission: Dexterous Functionality—Redesigning the Palmar Configuration Paradigm of Underactuated Prosthetic Hands
The design of prosthetic hands presents inherent complexities and contradictions that require careful resolution during the initial design phase to achieve a functional solution. This study simplifies prosthetic hand design through an in-depth analysis of the two degrees of freedom (DoF) metacarpophalangeal (MCP) joint, critical in enabling versatile grasping capabilities. Optimal palmar finger orientations were devised using performance metrics, enabling each finger to have 3 DoF while maintaining a simplified mechanical structure. The proposed palmar configuration demonstrated significantly improved grasping performance compared to conventional parallel-fingered designs, accommodating objects of diverse shapes and sizes. A preliminary 3D printed prototype was developed and tested to validate the design. The prototype successfully demonstrated its ability to grasp a wide range of objects, substantiating the efficacy of the novel palmar configuration. This innovative design reduces mechanical complexity without compromising dexterity or functionality. It represents a transformative approach to prosthetic hand development, aligning with the principal goal of enabling users to perform activities of daily living effectively. The findings of this work introduce a novel paradigm in prosthetic hand design, offering a balanced combination of efficiency, dexterity, and practical applicability, thereby advancing the state-of-the-art in prosthetic technology.
- 15 March 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (6) , 3214
Open AccessMission: Dexterous Functionality—Redesigning the Palmar Configuration Paradigm of Underactuated Prosthetic Hands
The design of prosthetic hands presents inherent complexities and contradictions that require careful resolution during the initial design phase to achieve a functional solution. This study simplifies prosthetic hand design through an in-depth analysis of the two degrees of freedom (DoF) metacarpophalangeal (MCP) joint, critical in enabling versatile grasping capabilities. Optimal palmar finger orientations were devised using performance metrics, enabling each finger to have 3 DoF while maintaining a simplified mechanical structure. The proposed palmar configuration demonstrated significantly improved grasping performance compared to conventional parallel-fingered designs, accommodating objects of diverse shapes and sizes. A preliminary 3D printed prototype was developed and tested to validate the design. The prototype successfully demonstrated its ability to grasp a wide range of objects, substantiating the efficacy of the novel palmar configuration. This innovative design reduces mechanical complexity without compromising dexterity or functionality. It represents a transformative approach to prosthetic hand development, aligning with the principal goal of enabling users to perform activities of daily living effectively. The findings of this work introduce a novel paradigm in prosthetic hand design, offering a balanced combination of efficiency, dexterity, and practical applicability, thereby advancing the state-of-the-art in prosthetic technology.
- Open Access
- 18 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 42673-42689
Methods for Measurement and Analysis of Full Hand Angular Kinematics Using Electromagnetic Tracking Sensors
The human hand needs a large number of sensors to measure kinematics owing to its large number of degrees of freedom. Existing devices like data gloves and optical trackers are associated with calibration, line of sight, and accuracy problems. In this paper, we attempt to measure the full hand kinematics using Electromagnetic Tracking Sensors (EMTS) which are accurate, free of line-of-sight problems, and require no calibration. However, EMTS provides output in the form of rotation groups which are defined on a nonlinear manifold. Hence, linear operations required for experimental analysis such as linear dimensionality reduction are not valid. Also, these sensors are expensive, utilize space in terms of cabling, and require a reduced sensor layout. In this paper, we present measurement methods, test the utility of linear and non-linear dimensionality reduction techniques on quaternions and exponential maps. We also performed sensor reduction using a Gini feature selection based on random forest algorithm. The kinematic measurement results show that EMTS yield superior posture reproduction with an error of less than 1 degree. Autoencoder, a nonlinear dimensionality reduction technique, was successfully applied on quaternions which was tuned to perform better than Principal Component Analysis (PCA) in reducing dimensions. The reduced sensor layout with 8 sensors was able to predict full hand kinematics with a Root Mean Square Error (RMSE) of 5.1 degrees.
- 18 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 42673-42689
Open AccessMethods for Measurement and Analysis of Full Hand Angular Kinematics Using Electromagnetic Tracking Sensors
The human hand needs a large number of sensors to measure kinematics owing to its large number of degrees of freedom. Existing devices like data gloves and optical trackers are associated with calibration, line of sight, and accuracy problems. In this paper, we attempt to measure the full hand kinematics using Electromagnetic Tracking Sensors (EMTS) which are accurate, free of line-of-sight problems, and require no calibration. However, EMTS provides output in the form of rotation groups which are defined on a nonlinear manifold. Hence, linear operations required for experimental analysis such as linear dimensionality reduction are not valid. Also, these sensors are expensive, utilize space in terms of cabling, and require a reduced sensor layout. In this paper, we present measurement methods, test the utility of linear and non-linear dimensionality reduction techniques on quaternions and exponential maps. We also performed sensor reduction using a Gini feature selection based on random forest algorithm. The kinematic measurement results show that EMTS yield superior posture reproduction with an error of less than 1 degree. Autoencoder, a nonlinear dimensionality reduction technique, was successfully applied on quaternions which was tuned to perform better than Principal Component Analysis (PCA) in reducing dimensions. The reduced sensor layout with 8 sensors was able to predict full hand kinematics with a Root Mean Square Error (RMSE) of 5.1 degrees.