Sönke Vogel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Sönke Vogel has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Andreas Brenner
Fraunhofer Institute for Laser Technology, 52074 Aachen, Germany
2 shared publications - Andreas Bührig-Polaczek
Foundry Institute, RWTH Aachen University, Aachen, Germany
2 shared publications - Arnold Gillner
RWTH Aachen University
2 shared publications - Bernadette Schlüter
Fraunhofer IWM MikroTribologie Centrum, Wöhlerstr. 9, 79108 Freiburg, Germany
2 shared publications - Bernhard Blug
Fraunhofer Institute for Mechanics of Materials, 79108 Freiburg, Germany
2 shared publications - Carsten Vogels
RWTH Aachen University
2 shared publications
Latest Publications
- Open Access
- 30 December 2023
- Published by Springer Nature
- p. 153-169
Material Solutions to Increase the Information Density in Mold-Based Production Systems
Production processes for the manufacturing of technical components are enabled by the availability and use of adequate engineering materials. Within the Internet of Production this work stream is dedicated to developing material and process-based solutions to increase the data availability during the manufacturing and operation of discontinuous mold-based production systems such as high-pressure die casting (HPDC) and injection molding (IM). This includes the development of data-driven alloy design strategies for additively manufactured mold components using tool steels as an initial use case as well as new surface-based smart sensor and actuator solutions. Material data and properties are tracked from the steel powder production via gas atomization until the final use in a mold to produce castings. Intermediate steps include the 3D printing of mold components via laser powder bed fusion and subsequent application of physical vapor deposition and thermal spraying-based smart multilayer coatings with sensor and actuator capabilities. The coating system is refined by selective laser patterning to facilitate the integration onto complex shape molding tool surfaces. Furthermore, molecular dynamics simulation-based methods are developed to derive material properties required for the modeling of polymer-based materials. By using this integrated methodology with the application of integrated computational materials engineering (ICME) methods from the metal powder for the mold printing up until the casting or molding process, the foundation for a holistic life cycle assessment within the integrated structural health engineering (ISHE) framework is laid for the produced tooling systems as well as the molded parts.
- 30 December 2023
- Published by Springer Nature
- p. 153-169
Open AccessMaterial Solutions to Increase the Information Density in Mold-Based Production Systems
Production processes for the manufacturing of technical components are enabled by the availability and use of adequate engineering materials. Within the Internet of Production this work stream is dedicated to developing material and process-based solutions to increase the data availability during the manufacturing and operation of discontinuous mold-based production systems such as high-pressure die casting (HPDC) and injection molding (IM). This includes the development of data-driven alloy design strategies for additively manufactured mold components using tool steels as an initial use case as well as new surface-based smart sensor and actuator solutions. Material data and properties are tracked from the steel powder production via gas atomization until the final use in a mold to produce castings. Intermediate steps include the 3D printing of mold components via laser powder bed fusion and subsequent application of physical vapor deposition and thermal spraying-based smart multilayer coatings with sensor and actuator capabilities. The coating system is refined by selective laser patterning to facilitate the integration onto complex shape molding tool surfaces. Furthermore, molecular dynamics simulation-based methods are developed to derive material properties required for the modeling of polymer-based materials. By using this integrated methodology with the application of integrated computational materials engineering (ICME) methods from the metal powder for the mold printing up until the casting or molding process, the foundation for a holistic life cycle assessment within the integrated structural health engineering (ISHE) framework is laid for the produced tooling systems as well as the molded parts.
- Open Access
- 11 May 2023
- Published by Springer Nature
- p. 1-17
Material Solutions to Increase the Information Density in Mold-Based Production Systems
Production processes for the manufacturing of technical components are enabled by the availability and use of adequate engineering materials. Within the Internet of Production this work stream is dedicated to developing material and process-based solutions to increase the data availability during the manufacturing and operation of discontinuous mold-based production systems such as high-pressure die casting (HPDC) and injection molding (IM). This includes the development of data-driven alloy design strategies for additively manufactured mold components using tool steels as an initial use case as well as new surface-based smart sensor and actuator solutions. Material data and properties are tracked from the steel powder production via gas atomization until the final use in a mold to produce castings. Intermediate steps include the 3D printing of mold components via laser powder bed fusion and subsequent application of physical vapor deposition and thermal spraying-based smart multilayer coatings with sensor and actuator capabilities. The coating system is refined by selective laser patterning to facilitate the integration onto complex shape molding tool surfaces. Furthermore, molecular dynamics simulation-based methods are developed to derive material properties required for the modeling of polymer-based materials. By using this integrated methodology with the application of integrated computational materials engineering (ICME) methods from the metal powder for the mold printing up until the casting or molding process, the foundation for a holistic life cycle assessment within the integrated structural health engineering (ISHE) framework is laid for the produced tooling systems as well as the molded parts.
- 11 May 2023
- Published by Springer Nature
- p. 1-17
Open AccessMaterial Solutions to Increase the Information Density in Mold-Based Production Systems
Production processes for the manufacturing of technical components are enabled by the availability and use of adequate engineering materials. Within the Internet of Production this work stream is dedicated to developing material and process-based solutions to increase the data availability during the manufacturing and operation of discontinuous mold-based production systems such as high-pressure die casting (HPDC) and injection molding (IM). This includes the development of data-driven alloy design strategies for additively manufactured mold components using tool steels as an initial use case as well as new surface-based smart sensor and actuator solutions. Material data and properties are tracked from the steel powder production via gas atomization until the final use in a mold to produce castings. Intermediate steps include the 3D printing of mold components via laser powder bed fusion and subsequent application of physical vapor deposition and thermal spraying-based smart multilayer coatings with sensor and actuator capabilities. The coating system is refined by selective laser patterning to facilitate the integration onto complex shape molding tool surfaces. Furthermore, molecular dynamics simulation-based methods are developed to derive material properties required for the modeling of polymer-based materials. By using this integrated methodology with the application of integrated computational materials engineering (ICME) methods from the metal powder for the mold printing up until the casting or molding process, the foundation for a holistic life cycle assessment within the integrated structural health engineering (ISHE) framework is laid for the produced tooling systems as well as the molded parts.
- Open Access
Laser Structuring and DLC Coating of Elastomers for High Performance Applications
Even though hard, low friction coatings such as diamond like carbon (DLC) would be beneficial for the performance and longevity of rubber seals, a crucial challenge remains. The elastic mismatch of rubber substrate and DLC coating prevents a fracture free coating application. In this work, a nature inspired approach is applied to render the stiff coating flexible and resilient to delamination at the same time by direct patterning. Rubber substrates were laser structured with tile patterns and subsequently DLC coated. Tensile and tribology tests were performed on structured and unstructured samples. Unstructured DLC coatings showed a crack pattern induced by the coating process, which was further fragmented by tensile stress. Coatings with tile patterns did not experience a further fragmentation under load. During continuous tribological loading, less heterogenous damage is produced for tile structured samples. The findings are ascribed to the relief of induced coating stress by the tile structure, meaning a more resilient coating.
Open AccessLaser Structuring and DLC Coating of Elastomers for High Performance Applications
Even though hard, low friction coatings such as diamond like carbon (DLC) would be beneficial for the performance and longevity of rubber seals, a crucial challenge remains. The elastic mismatch of rubber substrate and DLC coating prevents a fracture free coating application. In this work, a nature inspired approach is applied to render the stiff coating flexible and resilient to delamination at the same time by direct patterning. Rubber substrates were laser structured with tile patterns and subsequently DLC coated. Tensile and tribology tests were performed on structured and unstructured samples. Unstructured DLC coatings showed a crack pattern induced by the coating process, which was further fragmented by tensile stress. Coatings with tile patterns did not experience a further fragmentation under load. During continuous tribological loading, less heterogenous damage is produced for tile structured samples. The findings are ascribed to the relief of induced coating stress by the tile structure, meaning a more resilient coating.
- Open Access
- 23 March 2022
- Published by MDPI AG in Preprints.org
Laser Structuring and DLC Coating of Elastomers for High Performance Applications
Even though hard, low friction coatings such as diamond like carbon (DLC) would be beneficial for the per-formance and longevity of rubber seals, a crucial challenge – as graphically illustrated in Figure 1.a – remains. The elastic mismatch of rubber substrate and DLC coating prevents a fracture free coating application. In this work a nature inspired approach (Figure 1.b) is applied to render the stiff coating flexible and resilient to delamination at the same time by direct patterning. Rubber substrates were laser structured with tile patterns and subsequently DLC-coated. Tensile and tribology tests were performed on structured and unstructured samples. Unstructured DLC-coatings showed a crack pattern induced by the coating process, which was further fragmented by tensile stress. Coatings with tile patterns did not experience a further fragmentation under load. During continuous tribological loading, less heterogenous damage is produced for tile structured samples. The findings are ascribed to the relief of induced coating stress by the tile structure, meaning a more resilient coating.
- 23 March 2022
- Published by MDPI AG in Preprints.org
Open AccessLaser Structuring and DLC Coating of Elastomers for High Performance Applications
Even though hard, low friction coatings such as diamond like carbon (DLC) would be beneficial for the per-formance and longevity of rubber seals, a crucial challenge – as graphically illustrated in Figure 1.a – remains. The elastic mismatch of rubber substrate and DLC coating prevents a fracture free coating application. In this work a nature inspired approach (Figure 1.b) is applied to render the stiff coating flexible and resilient to delamination at the same time by direct patterning. Rubber substrates were laser structured with tile patterns and subsequently DLC-coated. Tensile and tribology tests were performed on structured and unstructured samples. Unstructured DLC-coatings showed a crack pattern induced by the coating process, which was further fragmented by tensile stress. Coatings with tile patterns did not experience a further fragmentation under load. During continuous tribological loading, less heterogenous damage is produced for tile structured samples. The findings are ascribed to the relief of induced coating stress by the tile structure, meaning a more resilient coating.