Gertjan Glabeke
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gertjan Glabeke has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
Jeroen van Beeck
Von Karman Institute for Fluid Dynamics (VKI)
2 shared publications- Adriana Enache
Aero-Thermo-Mechanics Department, Faculty of Applied Sciences, Universitè Libre de Bruxelles, 1050 Brussels, Belgium
1 shared publication - Alexander Funke
Institute of Flight Systems, German Aerospace Center (DLR), Brunswick, Germany
1 shared publication Antonio José Álvarez Naveira
University of La Coruña
1 shared publicationBruno Bernay
Sonaca Group, 6041 Gosselies, Belgium
1 shared publicationFélix Nieto
University of La Coruña
1 shared publication
Latest Publications
- Open Access
- 17 November 2026
- Published by Springer Nature
- p. 143-158
Wind Tunnel Study of Wind Loads on a Ship-to-Shore Container Crane Under Synoptic and Non-Synoptic Inflow
- 17 November 2026
- Published by Springer Nature
- p. 143-158
Open AccessWind Tunnel Study of Wind Loads on a Ship-to-Shore Container Crane Under Synoptic and Non-Synoptic Inflow
- Open Access
- 15 July 2025
- Published by Springer Nature in CEAS Aeronautical Journal
- Vol. 17 (2) , 677-693
Robust control of an actively controlled drogue for autonomous aerial docking
Automating the aerial docking procedure of two aircraft using the probe-and-drogue method can enable fully autonomous docking maneuvers for various applications in the future. For this purpose, a simplified system model of an actively controlled drogue was derived by combining the aerodynamic forces of control surfaces and the drogue body through superposition. Wind tunnel tests and computational fluid dynamics simulations were conducted to identify the aerodynamic coefficients, which were then used for model-based controller design. Robust control strategies such as sliding mode control, super twisting control, and PID control, which served as a baseline, were implemented and tested in a comprehensive probe-and-drogue simulation under various external disturbances. A super twisting disturbance observer was added to enhance the controllers’ performance. Furthermore, all tested control architectures were modified by adding incremental nonlinear dynamic inversion to reduce perturbation rejecting controller gains while preserving control performance. The derived system model and the implemented controllers were shown to be effective for this control problem. Specifically, the application of incremental nonlinear dynamic inversion can lead to reduced control input variation without compromising control performance.
- 15 July 2025
- Published by Springer Nature in CEAS Aeronautical Journal
- Vol. 17 (2) , 677-693
Open AccessRobust control of an actively controlled drogue for autonomous aerial docking
Automating the aerial docking procedure of two aircraft using the probe-and-drogue method can enable fully autonomous docking maneuvers for various applications in the future. For this purpose, a simplified system model of an actively controlled drogue was derived by combining the aerodynamic forces of control surfaces and the drogue body through superposition. Wind tunnel tests and computational fluid dynamics simulations were conducted to identify the aerodynamic coefficients, which were then used for model-based controller design. Robust control strategies such as sliding mode control, super twisting control, and PID control, which served as a baseline, were implemented and tested in a comprehensive probe-and-drogue simulation under various external disturbances. A super twisting disturbance observer was added to enhance the controllers’ performance. Furthermore, all tested control architectures were modified by adding incremental nonlinear dynamic inversion to reduce perturbation rejecting controller gains while preserving control performance. The derived system model and the implemented controllers were shown to be effective for this control problem. Specifically, the application of incremental nonlinear dynamic inversion can lead to reduced control input variation without compromising control performance.
- 1 May 2023
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 61 (6) , 2526-2551
Electrothermal Ice Protection Systems De-Icing: An Experimentally Validated Idealized Ice Shedding Model
The increased use of electrothermal ice protection systems (ETIPSs) in various industries (manned and unmanned aviation, energy production) requires improvements to de-icing efficiency, ice shedding predictability, and energy consumption. To achieve these, a coupled numerical and experimental investigation of ETIPS’s ice removal (ice shedding) mechanism is presented in this paper. Idealized ETIPS de-icing experiments performed in the icing wind tunnel of the von Karman Institute show several ice shedding mechanisms. A one-dimensional phase change solver developed for ice melting simulations highlights the water layer thickness influence over the ice shedding process. Coupled numerical–experimental results are employed to develop an idealized ice shedding model. The model is validated in realistic de-icing experiments in a second experimental campaign in the icing wind tunnel of the LeClerc Icing Research Laboratory.
- 1 May 2023
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 61 (6) , 2526-2551
Electrothermal Ice Protection Systems De-Icing: An Experimentally Validated Idealized Ice Shedding Model
The increased use of electrothermal ice protection systems (ETIPSs) in various industries (manned and unmanned aviation, energy production) requires improvements to de-icing efficiency, ice shedding predictability, and energy consumption. To achieve these, a coupled numerical and experimental investigation of ETIPS’s ice removal (ice shedding) mechanism is presented in this paper. Idealized ETIPS de-icing experiments performed in the icing wind tunnel of the von Karman Institute show several ice shedding mechanisms. A one-dimensional phase change solver developed for ice melting simulations highlights the water layer thickness influence over the ice shedding process. Coupled numerical–experimental results are employed to develop an idealized ice shedding model. The model is validated in realistic de-icing experiments in a second experimental campaign in the icing wind tunnel of the LeClerc Icing Research Laboratory.
- Open Access
- 1 July 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 148 (7) , 04022082
Life-Cycle Performance and Cost Analysis of Sand Mitigation Measures: Toward a Hybrid Experimental-Computational Approach
Windblown sand action affects civil structures and infrastructures in sandy environments, such as deserts and coasts. The wind interacts with human built structures of any kind leading to harmful effects, endangering their serviceability and users’ safety. To counter it, a number of sand mitigation measures (SMM) have been proposed, primarily through the trial-and-error empirical approach. As such, innovative approaches to properly quantify windblown sand action and to design SMM are needed in the current state-of-art and practice. In this study, the authors propose a novel hybrid approach to derive the life-cycle performance of SMM based on the combination of reliable wind-sand tunnel tests and innovative wind-sand computational simulations. Wind-sand tunnel tests are carried out to characterize the incoming sand flux in open field conditions. In a hybrid approach perspective, wind-sand tunnel measurements allow to properly tuned cheaper wind-sand computational simulations of the full-scale SMM performance. A probabilistic approach for determining windblown sand action and frequencies of sand removal maintenance is applied to a case study on a desert railway. Finally, a life-cycle cost analysis is carried out to assess extra-costs and savings derived from the implementation of the SMM. The proposed approach paves the way toward a comprehensive hybrid approach to the performance assessment of SMM.
- 1 July 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 148 (7) , 04022082
Open AccessLife-Cycle Performance and Cost Analysis of Sand Mitigation Measures: Toward a Hybrid Experimental-Computational Approach
Windblown sand action affects civil structures and infrastructures in sandy environments, such as deserts and coasts. The wind interacts with human built structures of any kind leading to harmful effects, endangering their serviceability and users’ safety. To counter it, a number of sand mitigation measures (SMM) have been proposed, primarily through the trial-and-error empirical approach. As such, innovative approaches to properly quantify windblown sand action and to design SMM are needed in the current state-of-art and practice. In this study, the authors propose a novel hybrid approach to derive the life-cycle performance of SMM based on the combination of reliable wind-sand tunnel tests and innovative wind-sand computational simulations. Wind-sand tunnel tests are carried out to characterize the incoming sand flux in open field conditions. In a hybrid approach perspective, wind-sand tunnel measurements allow to properly tuned cheaper wind-sand computational simulations of the full-scale SMM performance. A probabilistic approach for determining windblown sand action and frequencies of sand removal maintenance is applied to a case study on a desert railway. Finally, a life-cycle cost analysis is carried out to assess extra-costs and savings derived from the implementation of the SMM. The proposed approach paves the way toward a comprehensive hybrid approach to the performance assessment of SMM.
- 1 August 2018
- Published by Elsevier in Engineering Structures
- Vol. 168, 462-472
Porous and geometry-resolved CFD modelling of a lattice transmission tower validated by drag force and flow field measurements
- 1 August 2018
- Published by Elsevier in Engineering Structures
- Vol. 168, 462-472
Porous and geometry-resolved CFD modelling of a lattice transmission tower validated by drag force and flow field measurements