BPBaskara Sethupathi Paramathma

Baskara Sethupathi Paramathma

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Baskara Sethupathi Paramathma has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A comparative study of original equipment manufacturer brake pads using tribological testing and hybrid ranking for enhanced decision making and cost effectiveness

    by Parthasarathy Balaji, Balachandran Surya Rajan, Katharbasha Sathickbasha, Jitendra Kumar Katiyar, Paramathma Baskara Sethupathi, Kottur Asrar Ahmed

    Tribological test and hybrid ranking techniques are employed to evaluate brake pads from original equipment manufacturers for Indian passenger cars. The study was conducted for four brake pads designated as OE1, OE2, OE3, and OE4. The assessment integrates the analytical hierarchy process with various ranking methods including Extension Evaluation Method, Complex Proportional Assessment, Preference Selection Index, and Technique for Order of Preference by Similarity to Ideal Solution. Brake pad samples undergo testing according to the standard IS2742 part 1-4 of 1994, generating crucial performance parameters such as performance coefficient of friction, hot coefficient of friction, normal coefficient of friction, fade percentage, recovery percentage, variation in coefficient of friction, wear thickness loss percentage, wear mass loss percentage, and time taken to reach maximum temperature. These performance metrics are technically analyzed and ranked using hybrid ranking techniques to enhance the decision-making process. The results show that OE4, a budget-friendly brake pad ranked first, is the best performer. OE2, a more expensive alternative, is placed second, and OE1 and OE3, which are more affordable possibilities, are ranked third and fourth, respectively. This research serves as a valuable resource for selecting brake pads for Indian passenger cars, especially in scenarios where technical specifications and cost-effectiveness are crucial considerations.


  • Characterization of Silane Treated and Untreated Citrullus lanatus Fibers Based eco-friendly Automotive Brake Friction Composites

    by Baskara Sethupathi Paramathma, Madhu Sundaram, Vijayanand Palani, Vijay Raghunathan, Jafrey Daniel James Dhilip, Anish Khan

    The need for eco-friendly materials has risen globally due to environmental consciousness. This work involved the extraction and utilization of silane treated and untreated Citrullus lanatus stem fiber for eco-friendly brake friction composites. The fibers were extracted from Citrullus lanatus plant stems using a conventional manual retting process followed by silane treatment. The silane-treated and untreated Citrullus lanatus stem fibers were analyzed for physical, chemical, and thermal characteristics. The application suitability was explored by developing brake friction composites in the form of brake pads using silane-treated and untreated Citrullus lanatus stem fiber in addition to parental ingredients by the conventional process and compared with the glass fiber-based one. The developed brake pads were analyzed for performance properties as per industrial standards. The tribological performance was measured using the Chase test following IS2742-Part-4. The test results showed that cellulose content was 60.3% for silane-treated Citrullus lanatus fibers while it was 53.7% for untreated Citrullus lanatus fibers. The normal friction properties showed that silane-treated Citrullus lanatus stem fibers-based brake pads had 0.413 while it was 0.41 for glass fiber-based brake pads and 0.392 for untreated fiber-based ones. Using a scanning electron microscope, the worn surface of Chase brake pads revealed features like plowing, plateau formations.


  • Comprehensive characterization of Echinochloa frumentacea leaf fiber as a novel reinforcement for composite applications

    by Ravichandaran Rathinavelu, Baskara Sethupathi Paramathma

    The promising characteristic features of some natural plant fibers identified has driven many scientists/researchers to seek more plant fibers with good mechanical, thermal, tensile and surface properties. Plant fibers with such characteristics along with their renewable, degradable, eco‐friendly, cost‐effective nature could make them a probable competitor against synthetic ones, in many aspects. Since identification of novel plant fibers with superior quality is necessary at the moment in order to reduce the harmful effects of synthetic materials. Since the current study recognized a novel natural plant fiber from Echinochloa frumentacea and analyzed its efficiency for composite fabrication through various characterization practices. It was found from the physico‐chemical investigation that the fiber encloses with good crystallinity index (35.87%), cellulose content (60.31%) and relatively low density (896 ± 32.14 kg/m3). In fact, EFLF's has admirable thermal stability (330°C) and tensile strength (204.32 ± 14.25 MPa) designated its suitability for temperature varying environments. Conversely, the proposed fiber ensures good fiber‐matrix adhesion in spite of good surface roughness and decreased microfibrillar angle (9.27 ± 0.31°), noted by surface analysis. Hence, the current study recommends further utilization of EFLF as a reinforcing material with high specific qualities and low environmental effect, for composite manufacturing.


  • Synergistic effect of bismuth III sulfide and iron sulfide in the tribological performance of brake friction composite

    by Surya Rajan B, Sathickbasha K, Asrar Ahmed K, Hariharasakthisudhan P, Velmurugan C, Baskara Sethupathi P, Balaji P, Francesco Cotilli, K J Nagarajan

    Metal sulfides play a major role in determining the friction and wear performance of the brake friction composites. The usage of the combinations of metal sulfides improves tribological performance compared to its individual metal sulfides in the formulation of friction material. In this work, the effect of the Bismuth III sulfide and Iron disulfide combination was evaluated against the tribological performance in the formulation of the friction materials. Six brake friction pads were developed by properly balancing the weight percentage of Bismuth III sulfide and Iron disulfide in the formulation. The tribological performance of the friction liners was studied using a chase tribo-meter following the IS2742 test protocol. The worn surfaces of the brake pad samples were examined for its surface morphology and elemental behaviour using a Scanning electron microscope and an Energy-dispersive x-ray spectroscope. It was observed that the partial replacement of the Bismuth III sulfide with Iron sulfide improves the friction and fade performance. The abrasive nature of the Iron sulfide in the friction pad increases the coefficient of friction and causes the high wear loss beyond the ratio of 4:6 of the mixed sulfides. A statistical approach named preference selection Index was employed to rank the brake friction materials based on the multiple performance criteria.