Sunil Kumar Singh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sunil Kumar Singh has a total of 126 co-authors. Here are the top co-authors by number of shared publications:
- Akhilesh Kumar Singh
Department of Physical Sciences
23 shared publications S.B. Rai
11 shared publications- Shyam Bahadur Rai
Laser and Spectroscopy Laboratory, Department of Physics, Institute of Science, Banaras Hindu University, Varanasi, India
10 shared publications Priyam Singh
Indian Institute of Technology (BHU)
9 shared publicationsS. B. Rai
Department of Physics, Banaras Hindu University, Varanasi, India
7 shared publicationsSachin Singh
Department of Chemistry
7 shared publications
Latest Publications
- 30 September 2026
- Published by IOP Publishing in Methods and Applications in Fluorescence
- Vol. 14 (4) , 045008
Host-dependent structural and optical properties and upconversion ratiometric thermometry of Yb 3+ /Er 3+ -doped NaYF 4 , NaGdF 4 , NaScF 4 nanophosphors
This work presents a systematic study of the structural, morphological, and optical properties, along with the upconversion ratiometric thermometry of NaGd 0.78 Yb 0.2 Er 0.02 F 4 , NaY 0.88 Yb 0.1 Er 0.02 F 4 , NaY 0.78 Yb 0.2 Er 0.02 F 4 , and NaSc 0.78 Yb 0.2 Er 0.02 F 4 nanophosphors. Structural analysis confirms the hexagonal β -phase for all the nanophosphors except NaSc 0.78 Yb 0.2 Er 0.02 F 4 . Upconversion emission studies show emission bands corresponding to the 2 H 11/2 → 4 I 15/2 , 4 S 3/2 → 4 I 15/2 , and 4 F 9/2 → 4 I 15/2 transitions of Er 3+ ions. Upconversion emission intensities and green-to-red emission intensity ratios strongly depend on Yb 3+ concentration and phonon energy of the hosts. The temperature-dependent population distribution between the thermally coupled levels, 2 H 11/2 and 4 S 3/2 , was used for upconversion-based thermometry. The plot of temperature sensitivity as a function of absolute temperature shows a linear variation for all these nanophosphors. The NaSc 0.78 Yb 0.2 Er 0.02 F 4 shows the lowest temperature sensitivity, possibly because of the higher phonon energy of this host. Thus, the findings of this work provide valuable insights into the role of the sensitizer and host matrix in designing efficient upconversion nanothermometers.
- 30 September 2026
- Published by IOP Publishing in Methods and Applications in Fluorescence
- Vol. 14 (4) , 045008
Host-dependent structural and optical properties and upconversion ratiometric thermometry of Yb 3+ /Er 3+ -doped NaYF 4 , NaGdF 4 , NaScF 4 nanophosphors
This work presents a systematic study of the structural, morphological, and optical properties, along with the upconversion ratiometric thermometry of NaGd 0.78 Yb 0.2 Er 0.02 F 4 , NaY 0.88 Yb 0.1 Er 0.02 F 4 , NaY 0.78 Yb 0.2 Er 0.02 F 4 , and NaSc 0.78 Yb 0.2 Er 0.02 F 4 nanophosphors. Structural analysis confirms the hexagonal β -phase for all the nanophosphors except NaSc 0.78 Yb 0.2 Er 0.02 F 4 . Upconversion emission studies show emission bands corresponding to the 2 H 11/2 → 4 I 15/2 , 4 S 3/2 → 4 I 15/2 , and 4 F 9/2 → 4 I 15/2 transitions of Er 3+ ions. Upconversion emission intensities and green-to-red emission intensity ratios strongly depend on Yb 3+ concentration and phonon energy of the hosts. The temperature-dependent population distribution between the thermally coupled levels, 2 H 11/2 and 4 S 3/2 , was used for upconversion-based thermometry. The plot of temperature sensitivity as a function of absolute temperature shows a linear variation for all these nanophosphors. The NaSc 0.78 Yb 0.2 Er 0.02 F 4 shows the lowest temperature sensitivity, possibly because of the higher phonon energy of this host. Thus, the findings of this work provide valuable insights into the role of the sensitizer and host matrix in designing efficient upconversion nanothermometers.
- 28 August 2026
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 109 (9) , e71177
Eu 3+ ‐Activated Ba 2 LaMoO 6 Red‐Emitting Phosphors for UVB/Blue‐Driven Solid‐State Lighting
Thermally stable red‐emitting phosphors capable of sustaining efficiency at elevated temperatures are crucial for high‐power solid‐state lighting. In this study, Eu 3+ ‐activated Ba 2 LaMoO 6 phosphors were synthesized via conventional solid‐state reaction route at 1200°C, yielding a monoclinic phase [P2 1 /c (14)] with successful substitution of Eu 3+ at La 3+ sites. Developed phosphors exhibit intense red Eu 3+ emission dominated by the hypersensitive 5 D 0 → 7 F 2 transition, indicating a non‐centrosymmetric monoclinic environment, with optimal emission at 8 mol% Eu 3+ doping beyond which dipole–dipole quenching occurs. Temperature‐dependent photoluminescence (TD‐PL) analysis reveals gradual thermal quenching, with ∼30% emission retained at 440 K, following Arrhenius‐type trend with moderate activation energies of 0.3464 and 0.3024 eV under 292 nm excitation, and 0.2873 and 0.2667 eV under 467 nm excitation during the heating and cooling cycles, respectively. To assess their practical applicability, poly(methyl methacrylate) as thermoplastic resin‐dispersed phosphor integrated onto a glass slide exhibits intense red emission with high color purity, stable CIE coordinates, and low correlated color temperature (CCT). Chromaticity coordinates (CIE) remain in the red region with high color purity across the investigated temperature range, underscoring the potential of Ba 2 LaMoO 6 :Eu 3+ phosphors as promising red‐emitting materials for optoelectronic and solid‐state lighting applications.
- 28 August 2026
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 109 (9) , e71177
Eu 3+ ‐Activated Ba 2 LaMoO 6 Red‐Emitting Phosphors for UVB/Blue‐Driven Solid‐State Lighting
Thermally stable red‐emitting phosphors capable of sustaining efficiency at elevated temperatures are crucial for high‐power solid‐state lighting. In this study, Eu 3+ ‐activated Ba 2 LaMoO 6 phosphors were synthesized via conventional solid‐state reaction route at 1200°C, yielding a monoclinic phase [P2 1 /c (14)] with successful substitution of Eu 3+ at La 3+ sites. Developed phosphors exhibit intense red Eu 3+ emission dominated by the hypersensitive 5 D 0 → 7 F 2 transition, indicating a non‐centrosymmetric monoclinic environment, with optimal emission at 8 mol% Eu 3+ doping beyond which dipole–dipole quenching occurs. Temperature‐dependent photoluminescence (TD‐PL) analysis reveals gradual thermal quenching, with ∼30% emission retained at 440 K, following Arrhenius‐type trend with moderate activation energies of 0.3464 and 0.3024 eV under 292 nm excitation, and 0.2873 and 0.2667 eV under 467 nm excitation during the heating and cooling cycles, respectively. To assess their practical applicability, poly(methyl methacrylate) as thermoplastic resin‐dispersed phosphor integrated onto a glass slide exhibits intense red emission with high color purity, stable CIE coordinates, and low correlated color temperature (CCT). Chromaticity coordinates (CIE) remain in the red region with high color purity across the investigated temperature range, underscoring the potential of Ba 2 LaMoO 6 :Eu 3+ phosphors as promising red‐emitting materials for optoelectronic and solid‐state lighting applications.
- 3 August 2026
- Published by IOP Publishing in Methods and Applications in Fluorescence
- Vol. 14 (3) , 035005
Effect of particle size and halide composition on structural and optical properties of CsPbX 3 nanocrystals
Cesium lead halide perovskite nanocrystals (NCs) are emerging as a promising material for next-generation optoelectronic systems. This work investigates how variations in particle size and halide composition affect the structural and optical properties of CsPbX 3 NCs. CsPbBr 3 NCs of different sizes were prepared using a hot-injection procedure, with the ability to regulate the quenching time, and it was found that larger NCs have a smaller band gap. The crystal structure was found to be cubic. The influence of the halide composition was analyzed by synthesizing CsPbCl 3 , CsPbBr 3 , and CsPbI 3 under the same conditions. CsPbCl 3 showed the broadest bandgap and shortest lifetime, CsPbI 3 the closest bandgap and longest lifetime, and CsPbBr 3 showed a good compromise between bandgap, luminescence intensity, and structural stability. Optical tuning was also confirmed with respect to size and composition, with reference to UV–visible absorption and photoluminescence tests; blue, green, and red emissions were observed in the case of CsPbCl 3 , CsPbBr 3 , and CsPbI 3 , respectively, with UV illumination. These findings demonstrate the synergistic nature of particle size and halide composition in designing the structural and optical characteristics of CsPbX 3 NCs to offer principles of perovskite-based devices.
- 3 August 2026
- Published by IOP Publishing in Methods and Applications in Fluorescence
- Vol. 14 (3) , 035005
Effect of particle size and halide composition on structural and optical properties of CsPbX 3 nanocrystals
Cesium lead halide perovskite nanocrystals (NCs) are emerging as a promising material for next-generation optoelectronic systems. This work investigates how variations in particle size and halide composition affect the structural and optical properties of CsPbX 3 NCs. CsPbBr 3 NCs of different sizes were prepared using a hot-injection procedure, with the ability to regulate the quenching time, and it was found that larger NCs have a smaller band gap. The crystal structure was found to be cubic. The influence of the halide composition was analyzed by synthesizing CsPbCl 3 , CsPbBr 3 , and CsPbI 3 under the same conditions. CsPbCl 3 showed the broadest bandgap and shortest lifetime, CsPbI 3 the closest bandgap and longest lifetime, and CsPbBr 3 showed a good compromise between bandgap, luminescence intensity, and structural stability. Optical tuning was also confirmed with respect to size and composition, with reference to UV–visible absorption and photoluminescence tests; blue, green, and red emissions were observed in the case of CsPbCl 3 , CsPbBr 3 , and CsPbI 3 , respectively, with UV illumination. These findings demonstrate the synergistic nature of particle size and halide composition in designing the structural and optical characteristics of CsPbX 3 NCs to offer principles of perovskite-based devices.
- 20 July 2026
- Published by Elsevier in Applied Surface Science
- Vol. 749
Iodine-assisted defect control in AgBiI4 for boosting lead-free photovoltaics
- 20 July 2026
- Published by Elsevier in Applied Surface Science
- Vol. 749
Iodine-assisted defect control in AgBiI4 for boosting lead-free photovoltaics
- 26 June 2026
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 4 (7) , 2262-2275
Upconversion Nanoparticle Driven Solar Spectrum Conversion for Next-Generation Smart Photonic Windows
- 26 June 2026
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 4 (7) , 2262-2275
Upconversion Nanoparticle Driven Solar Spectrum Conversion for Next-Generation Smart Photonic Windows
- 20 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 4 (4) , 1155-1168
Enhancement Mechanism of Temperature Sensitivity in Y 2 WO 6 -Based NIR-Upconverting Crystals through Atomic-Level Disorder
- 20 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 4 (4) , 1155-1168
Enhancement Mechanism of Temperature Sensitivity in Y 2 WO 6 -Based NIR-Upconverting Crystals through Atomic-Level Disorder
- Open Access
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in RSC Applied Interfaces
Two-dimensional halide-based hybrid perovskite materials: properties, perspectives, and future scopes
A comprehensive overview of two-dimensional halide perovskites, emphasizing structural design, fundamental properties, device application, and future directions for optoelectronics.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in RSC Applied Interfaces
Open AccessTwo-dimensional halide-based hybrid perovskite materials: properties, perspectives, and future scopes
A comprehensive overview of two-dimensional halide perovskites, emphasizing structural design, fundamental properties, device application, and future directions for optoelectronics.
- 22 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 3 (11) , 2756-2766
Spectral Modulation of Lead-Free Cs 2 NaInCl 6 Double Perovskites via Sb 3+ /Mn 2+ Codoping and Bromide Ion Substitution for Multifunctional Applications
- 22 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 3 (11) , 2756-2766
Spectral Modulation of Lead-Free Cs 2 NaInCl 6 Double Perovskites via Sb 3+ /Mn 2+ Codoping and Bromide Ion Substitution for Multifunctional Applications
- 10 September 2025
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1350
Probing the role of ligand molecules on the thermal stability and optical properties of Tb3+-based complexes
- 10 September 2025
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1350
Probing the role of ligand molecules on the thermal stability and optical properties of Tb3+-based complexes