Akhilesh Kumar Singh
Akhilesh Kumar Singh has a total of 83 co-authors. Here are the top co-authors by number of shared publications:
- Sunil Kumar Singh
Indian Institute of Technology (Banaras Hindu University)
23 shared publications Anjana Yadav
Banasthali Vidyapith, Banasthali
11 shared publicationsRajiv Prakash
School of Materials Science and Technology, Indian Institute of Technology (Banaras Hindu University), Varanasi 221005, India
7 shared publicationsCharu Dubey
Department of Physical Sciences
6 shared publicationsS. B. Rai
Department of Physics, Banaras Hindu University, Varanasi-221005, India
6 shared publicationsS.B. Rai
6 shared publications
Latest Publications
- 30 September 2026
- Published by IOP Publishing in Methods and Applications in Fluorescence
- Vol. 14 (4) , 045008
Host-dependent structural and optical properties and upconversion ratiometric thermometry of Yb 3+ /Er 3+ -doped NaYF 4 , NaGdF 4 , NaScF 4 nanophosphors
This work presents a systematic study of the structural, morphological, and optical properties, along with the upconversion ratiometric thermometry of NaGd 0.78 Yb 0.2 Er 0.02 F 4 , NaY 0.88 Yb 0.1 Er 0.02 F 4 , NaY 0.78 Yb 0.2 Er 0.02 F 4 , and NaSc 0.78 Yb 0.2 Er 0.02 F 4 nanophosphors. Structural analysis confirms the hexagonal β -phase for all the nanophosphors except NaSc 0.78 Yb 0.2 Er 0.02 F 4 . Upconversion emission studies show emission bands corresponding to the 2 H 11/2 → 4 I 15/2 , 4 S 3/2 → 4 I 15/2 , and 4 F 9/2 → 4 I 15/2 transitions of Er 3+ ions. Upconversion emission intensities and green-to-red emission intensity ratios strongly depend on Yb 3+ concentration and phonon energy of the hosts. The temperature-dependent population distribution between the thermally coupled levels, 2 H 11/2 and 4 S 3/2 , was used for upconversion-based thermometry. The plot of temperature sensitivity as a function of absolute temperature shows a linear variation for all these nanophosphors. The NaSc 0.78 Yb 0.2 Er 0.02 F 4 shows the lowest temperature sensitivity, possibly because of the higher phonon energy of this host. Thus, the findings of this work provide valuable insights into the role of the sensitizer and host matrix in designing efficient upconversion nanothermometers.
- 30 September 2026
- Published by IOP Publishing in Methods and Applications in Fluorescence
- Vol. 14 (4) , 045008
Host-dependent structural and optical properties and upconversion ratiometric thermometry of Yb 3+ /Er 3+ -doped NaYF 4 , NaGdF 4 , NaScF 4 nanophosphors
This work presents a systematic study of the structural, morphological, and optical properties, along with the upconversion ratiometric thermometry of NaGd 0.78 Yb 0.2 Er 0.02 F 4 , NaY 0.88 Yb 0.1 Er 0.02 F 4 , NaY 0.78 Yb 0.2 Er 0.02 F 4 , and NaSc 0.78 Yb 0.2 Er 0.02 F 4 nanophosphors. Structural analysis confirms the hexagonal β -phase for all the nanophosphors except NaSc 0.78 Yb 0.2 Er 0.02 F 4 . Upconversion emission studies show emission bands corresponding to the 2 H 11/2 → 4 I 15/2 , 4 S 3/2 → 4 I 15/2 , and 4 F 9/2 → 4 I 15/2 transitions of Er 3+ ions. Upconversion emission intensities and green-to-red emission intensity ratios strongly depend on Yb 3+ concentration and phonon energy of the hosts. The temperature-dependent population distribution between the thermally coupled levels, 2 H 11/2 and 4 S 3/2 , was used for upconversion-based thermometry. The plot of temperature sensitivity as a function of absolute temperature shows a linear variation for all these nanophosphors. The NaSc 0.78 Yb 0.2 Er 0.02 F 4 shows the lowest temperature sensitivity, possibly because of the higher phonon energy of this host. Thus, the findings of this work provide valuable insights into the role of the sensitizer and host matrix in designing efficient upconversion nanothermometers.
- 3 August 2026
- Published by IOP Publishing in Methods and Applications in Fluorescence
- Vol. 14 (3) , 035005
Effect of particle size and halide composition on structural and optical properties of CsPbX 3 nanocrystals
Cesium lead halide perovskite nanocrystals (NCs) are emerging as a promising material for next-generation optoelectronic systems. This work investigates how variations in particle size and halide composition affect the structural and optical properties of CsPbX 3 NCs. CsPbBr 3 NCs of different sizes were prepared using a hot-injection procedure, with the ability to regulate the quenching time, and it was found that larger NCs have a smaller band gap. The crystal structure was found to be cubic. The influence of the halide composition was analyzed by synthesizing CsPbCl 3 , CsPbBr 3 , and CsPbI 3 under the same conditions. CsPbCl 3 showed the broadest bandgap and shortest lifetime, CsPbI 3 the closest bandgap and longest lifetime, and CsPbBr 3 showed a good compromise between bandgap, luminescence intensity, and structural stability. Optical tuning was also confirmed with respect to size and composition, with reference to UV–visible absorption and photoluminescence tests; blue, green, and red emissions were observed in the case of CsPbCl 3 , CsPbBr 3 , and CsPbI 3 , respectively, with UV illumination. These findings demonstrate the synergistic nature of particle size and halide composition in designing the structural and optical characteristics of CsPbX 3 NCs to offer principles of perovskite-based devices.
- 3 August 2026
- Published by IOP Publishing in Methods and Applications in Fluorescence
- Vol. 14 (3) , 035005
Effect of particle size and halide composition on structural and optical properties of CsPbX 3 nanocrystals
Cesium lead halide perovskite nanocrystals (NCs) are emerging as a promising material for next-generation optoelectronic systems. This work investigates how variations in particle size and halide composition affect the structural and optical properties of CsPbX 3 NCs. CsPbBr 3 NCs of different sizes were prepared using a hot-injection procedure, with the ability to regulate the quenching time, and it was found that larger NCs have a smaller band gap. The crystal structure was found to be cubic. The influence of the halide composition was analyzed by synthesizing CsPbCl 3 , CsPbBr 3 , and CsPbI 3 under the same conditions. CsPbCl 3 showed the broadest bandgap and shortest lifetime, CsPbI 3 the closest bandgap and longest lifetime, and CsPbBr 3 showed a good compromise between bandgap, luminescence intensity, and structural stability. Optical tuning was also confirmed with respect to size and composition, with reference to UV–visible absorption and photoluminescence tests; blue, green, and red emissions were observed in the case of CsPbCl 3 , CsPbBr 3 , and CsPbI 3 , respectively, with UV illumination. These findings demonstrate the synergistic nature of particle size and halide composition in designing the structural and optical characteristics of CsPbX 3 NCs to offer principles of perovskite-based devices.
- 27 July 2026
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 1079
Eco-friendly synthesis of lead-free Cs3Cu2I5 halide perovskite–Eu-MOF hybrid for advanced multi-stimuli security ink
- 27 July 2026
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 1079
Eco-friendly synthesis of lead-free Cs3Cu2I5 halide perovskite–Eu-MOF hybrid for advanced multi-stimuli security ink
- 7 December 2025
- Published by Elsevier in Materials Research Bulletin
- Vol. 197
Exploring optical properties and ratiometric temperature sensing via PL intensity and lifetime in Eu0.025Tb0.975(2-CIBA)3Phen
- 7 December 2025
- Published by Elsevier in Materials Research Bulletin
- Vol. 197
Exploring optical properties and ratiometric temperature sensing via PL intensity and lifetime in Eu0.025Tb0.975(2-CIBA)3Phen
- 22 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 3 (11) , 2756-2766
Spectral Modulation of Lead-Free Cs 2 NaInCl 6 Double Perovskites via Sb 3+ /Mn 2+ Codoping and Bromide Ion Substitution for Multifunctional Applications
- 22 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 3 (11) , 2756-2766
Spectral Modulation of Lead-Free Cs 2 NaInCl 6 Double Perovskites via Sb 3+ /Mn 2+ Codoping and Bromide Ion Substitution for Multifunctional Applications
- 10 September 2025
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1350
Probing the role of ligand molecules on the thermal stability and optical properties of Tb3+-based complexes
- 10 September 2025
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1350
Probing the role of ligand molecules on the thermal stability and optical properties of Tb3+-based complexes
- 21 August 2024
- Published by IOP Publishing in Methods and Applications in Fluorescence
- Vol. 12 (4) , 045004
Effect of Mn2+ doping and DDAB-assisted postpassivation on the structural and optical properties of CsPb(Cl/Br)3 halide perovskite nanocrystals
Cesium lead halide perovskite (CsPbX3; X = Cl, Br, I) nanocrystals showing intense band-edge emission and high photoluminescence quantum yield are known to be a potential candidate for application in optoelectronic devices. However, controlling toxicity due to the presence of Pb2+ in lead-based halide perovskites is a major challenge for the environment that needs to be tackled cautiously. In this work, we have partially replaced Pb2+ with Mn2+ ions in the CsPb(Cl/Br)3 nanocrystals and investigated their impact on the structural and optical properties. The Rietveld refinement shows that CsPbCl2Br nanocrystals possess a cubic crystal structure with Pm 3 ̅ m space group, the Mn2+ doping results in the contraction of the unit cell. The CsPb(Cl/Br)3: Mn nanocrystals show a substantial change in the optical properties with an additional emission band at ∼588 nm through a d-d transition, changing the emission color from blue to pink. Here, a didodecyldimethylammonium bromide (DDAB) ligand that triggers both anion and ligand exchange in the CsPb(Cl/Br)3: Mn nanocrystals have been used to regulate the exchange reaction and tune the emission color of halide perovskites by changing the peak position and the PL intensities of band-edge and Mn2+ defect states. We have also shown that oleic acid helps in the desorption of oleylamine capping from the CsPb(Cl/Br)3: Mn nanocrystal surfaces and DDAB, resulting in the substitution of Cl− with Br− as well as provides capping with shorter branched length ligand which led to increase in the overall PL intensity by many folds.
- 21 August 2024
- Published by IOP Publishing in Methods and Applications in Fluorescence
- Vol. 12 (4) , 045004
Effect of Mn2+ doping and DDAB-assisted postpassivation on the structural and optical properties of CsPb(Cl/Br)3 halide perovskite nanocrystals
Cesium lead halide perovskite (CsPbX3; X = Cl, Br, I) nanocrystals showing intense band-edge emission and high photoluminescence quantum yield are known to be a potential candidate for application in optoelectronic devices. However, controlling toxicity due to the presence of Pb2+ in lead-based halide perovskites is a major challenge for the environment that needs to be tackled cautiously. In this work, we have partially replaced Pb2+ with Mn2+ ions in the CsPb(Cl/Br)3 nanocrystals and investigated their impact on the structural and optical properties. The Rietveld refinement shows that CsPbCl2Br nanocrystals possess a cubic crystal structure with Pm 3 ̅ m space group, the Mn2+ doping results in the contraction of the unit cell. The CsPb(Cl/Br)3: Mn nanocrystals show a substantial change in the optical properties with an additional emission band at ∼588 nm through a d-d transition, changing the emission color from blue to pink. Here, a didodecyldimethylammonium bromide (DDAB) ligand that triggers both anion and ligand exchange in the CsPb(Cl/Br)3: Mn nanocrystals have been used to regulate the exchange reaction and tune the emission color of halide perovskites by changing the peak position and the PL intensities of band-edge and Mn2+ defect states. We have also shown that oleic acid helps in the desorption of oleylamine capping from the CsPb(Cl/Br)3: Mn nanocrystal surfaces and DDAB, resulting in the substitution of Cl− with Br− as well as provides capping with shorter branched length ligand which led to increase in the overall PL intensity by many folds.
- 13 March 2024
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 2 (3) , 492-500
Improving the Stability of Lead-Free CsSnBr3 Halide Perovskite by DDAB-Assisted Postpassivation Surface Engineering
- 13 March 2024
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 2 (3) , 492-500
Improving the Stability of Lead-Free CsSnBr3 Halide Perovskite by DDAB-Assisted Postpassivation Surface Engineering