Keuntae Baek
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Keuntae Baek has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Hongyun So
Hanyang University
8 shared publications - Sanghun Shin
Department of Mechanical Engineering, Hanyang University, Seoul, South Korea
4 shared publications Animesh Sinha
1 shared publicationHyeyun Kang
1 shared publicationIlgu Kim
1 shared publication- Jaebum Sung
Department of Mechanical Convergence Engineering, Hanyang University, Seoul, South Korea
1 shared publication
Latest Publications
- Open Access
- 26 August 2026
- Published by Elsevier in Sensors and Actuators Reports
- Vol. 12
Dual-salt-induced polyionic hydrogels with controlled swelling for self-healable underwater strain sensors
- 26 August 2026
- Published by Elsevier in Sensors and Actuators Reports
- Vol. 12
Open AccessDual-salt-induced polyionic hydrogels with controlled swelling for self-healable underwater strain sensors
- Open Access
- 21 February 2026
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 41, 6570-6582
Prediction of corrosion behavior of stainless steels with effective corrosion factors using a SHAP-based deep learning framework
- 21 February 2026
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 41, 6570-6582
Open AccessPrediction of corrosion behavior of stainless steels with effective corrosion factors using a SHAP-based deep learning framework
- 20 January 2025
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 429
Chemical-responsive curved actuator using PDMS/Ecoflex composite bilayer for rapid detection of chemical solvent leakage
- 20 January 2025
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 429
Chemical-responsive curved actuator using PDMS/Ecoflex composite bilayer for rapid detection of chemical solvent leakage
- 18 January 2025
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 383
Recent developments of in-situ process and in-line quality monitoring in injection molding using intelligent sensors
- 18 January 2025
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 383
Recent developments of in-situ process and in-line quality monitoring in injection molding using intelligent sensors
- Open Access
- 1 January 2025
- Published by Wiley in International Journal of Energy Research
- Vol. 2025 (1)
Rapid Prediction of Local Mean Age of Air for Energy‐Efficient Ventilation Systems Using Permutation Feature Importance
Prediction of local mean age of air (MAA) is a key technology that can enhance the comfort, health, and productivity of indoor residents by adjusting and optimizing the indoor environmental conditions. In this study, we developed a deep neural network (DNN)‐based regression model to predict indoor air quality (IAQ) and proposed a permutation feature importance (PFI)‐based explainable artificial intelligence (XAI) model to implement efficient ventilation systems in a hospital ward utilizing this regression model. The rapid prediction of the MAA in the space near each patient in the ward, depending on the location of the heating, ventilation, and air conditioning (HVAC) inlets and fluid velocity, were successfully measured through data‐driven deep learning model training. Consequently, the proposed MAA prediction model achieved average R ‐squared values of 0.9506 and 0.9220 for MAA 1 and MAA 2 , respectively. In addition, the DNN model demonstrated rapid predictive performance (~0.4 ms/prediction), highlighting the possibility of real‐time monitoring compared to conventional methods. Furthermore, the contribution of the location and fluid velocity of the HVAC system to the MAA in the space near the patient was analyzed using PFI. These results support the rapid virtual sensing and recommendation method that has the potential to be applied in future IAQ management, human healthcare, and energy management systems.
- 1 January 2025
- Published by Wiley in International Journal of Energy Research
- Vol. 2025 (1)
Open AccessRapid Prediction of Local Mean Age of Air for Energy‐Efficient Ventilation Systems Using Permutation Feature Importance
Prediction of local mean age of air (MAA) is a key technology that can enhance the comfort, health, and productivity of indoor residents by adjusting and optimizing the indoor environmental conditions. In this study, we developed a deep neural network (DNN)‐based regression model to predict indoor air quality (IAQ) and proposed a permutation feature importance (PFI)‐based explainable artificial intelligence (XAI) model to implement efficient ventilation systems in a hospital ward utilizing this regression model. The rapid prediction of the MAA in the space near each patient in the ward, depending on the location of the heating, ventilation, and air conditioning (HVAC) inlets and fluid velocity, were successfully measured through data‐driven deep learning model training. Consequently, the proposed MAA prediction model achieved average R ‐squared values of 0.9506 and 0.9220 for MAA 1 and MAA 2 , respectively. In addition, the DNN model demonstrated rapid predictive performance (~0.4 ms/prediction), highlighting the possibility of real‐time monitoring compared to conventional methods. Furthermore, the contribution of the location and fluid velocity of the HVAC system to the MAA in the space near the patient was analyzed using PFI. These results support the rapid virtual sensing and recommendation method that has the potential to be applied in future IAQ management, human healthcare, and energy management systems.
- 7 March 2023
- Published by Elsevier in Building and Environment
- Vol. 234
Rapid monitoring of indoor air quality for efficient HVAC systems using fully convolutional network deep learning model
- 7 March 2023
- Published by Elsevier in Building and Environment
- Vol. 234
Rapid monitoring of indoor air quality for efficient HVAC systems using fully convolutional network deep learning model
- Open Access
- 17 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 31445-31454
3D Printing-Assisted Soft Capacitive Inclinometers for Simultaneous Monitoring of Tilt Angles and Directions
This study presents capacitive-type inclinometers composed of flexible polymer pillars and dome-shaped roof frames that were manufactured using the three-dimensional (3D) printing method. Polylactic acid (PLA) filaments and acrylonitrile butadiene styrene (ABS) filaments were printed by the fused deposition modeling type 3D printer to fabricate the dome-shaped roof frames and the polymer curing molds, respectively. The operating principle of the inclinometer was to detect the change in capacitance between the helix-shaped electrode coiled around the polymer pillar and the built-in electrode in the roof frame. When the inclinometer was tilted, the polymer pillar was bent, and the physical distance between each electrode was changed with respect to the tilt angle and direction. Therefore, the tilt angles and directions were simultaneously estimated by distinguishing the capacitance and peak capacitance, respectively. The results of the experiments revealed that the inclinometer using the polymer pillar that was electrically connected to a standard weight and the roof frame with a roof angle of 45° exhibited a higher sensitivity (1.391 pF at a tilt angle of 40°) compared to those using roof angles of 90° and 135°. This study supports the use of 3D printing technology for the facile manufacturing of inclinometers that can detect tilt angles and directions simultaneously, which is not achievable with conventional inclinometers.
- 17 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 31445-31454
Open Access3D Printing-Assisted Soft Capacitive Inclinometers for Simultaneous Monitoring of Tilt Angles and Directions
This study presents capacitive-type inclinometers composed of flexible polymer pillars and dome-shaped roof frames that were manufactured using the three-dimensional (3D) printing method. Polylactic acid (PLA) filaments and acrylonitrile butadiene styrene (ABS) filaments were printed by the fused deposition modeling type 3D printer to fabricate the dome-shaped roof frames and the polymer curing molds, respectively. The operating principle of the inclinometer was to detect the change in capacitance between the helix-shaped electrode coiled around the polymer pillar and the built-in electrode in the roof frame. When the inclinometer was tilted, the polymer pillar was bent, and the physical distance between each electrode was changed with respect to the tilt angle and direction. Therefore, the tilt angles and directions were simultaneously estimated by distinguishing the capacitance and peak capacitance, respectively. The results of the experiments revealed that the inclinometer using the polymer pillar that was electrically connected to a standard weight and the roof frame with a roof angle of 45° exhibited a higher sensitivity (1.391 pF at a tilt angle of 40°) compared to those using roof angles of 90° and 135°. This study supports the use of 3D printing technology for the facile manufacturing of inclinometers that can detect tilt angles and directions simultaneously, which is not achievable with conventional inclinometers.