RKRuslan Kostyunik

Ruslan Kostyunik

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ruslan Kostyunik has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    СТЕНД КОНТРОЛЮ МІКРОЗАБРУДНЕННЯ ЯК ІНСТРУМЕНТ ЯКІСНОЇ ДІАГНОСТИКИ МІНІАТЮРНИХ ШАРИКОПІДШИПНИКІВ

    by Олександр Стельмах, Руслан Костюнік, Рудольф Мнацаканов, Олексій Кущев, Сергій Шимчук

    Проведено оцінку конструктивних особливостей, науково-практичного потенціалу та ефективності застосування новоствореного чотириканального вимірювального стенду вхідного контролю мікрозабруднень мініатюрних і прецизійних кулькових підшипників, призначених для прецизійних механічних систем авіаційної та оборонної техніки. Проаналізовано негативний вплив сторонніх твердих і м'яких мікрочастинок на деградацію робочих поверхонь доріжок кочення, що призводить до локальних надвисоких контактних напружень, абразивного зносу, заклинювання та інтенсивного втомного викришування. Обґрунтовано впровадження інвертованої кінематичної схеми стенду, за якої обертається зовнішнє кільце підшипника, а датчики монтуються на нерухомому внутрішньому валу, що забезпечує безконтактний магнітний розгін, виключення сторонніх завад, максимальну чутливість до мікрочастинок бруду та захист сенсорів від динамічних похибок обертання. Описано технічні характеристики синхронного чотириканального збору даних, який об'єднує оптичний канал для фіксації частоти обертання і часу вибігу, вібраційний канал для цифрової обробки сигналів і обчислення пік-фактора й ексцесу, акустичний канал на базі датчика акустичної емісії та мікрофона, а також силовий канал для точної реєстрації чистого моменту тертя методом реакції корпусу. Проведено серію експериментальних порівняльних вимірювань двох партій мініатронних підшипників NTN 61901ZZ/5K та FAG 6001–C–2HRS до та після проведення процедури реновації. Одержано позитивні результати відновлення віброакустичних характеристик деталей за допомогою комбінованого імпульсно магнітно-турбулентного та ультразвукового очищення в розчиннику нефрас. Доведено, що використання такого комбінованого впливу знижує показники вібропришвидшення підшипників на 66–75%, а коефіцієнт варіації часу вибігу зменшується з початкових 38–42% до 9–28%, забезпечуючи високу однорідність відновленої партії. Одержано підтвердження ефективності методу вільного вибігу як самостійного первинного інструменту експрес-діагностики промислової чистоти та виявлення незворотних геометричних дефектів без залучення складного спектрального аналізу. Проведено оцінку економічного ефекту від впровадження розробленого стенду на авіаремонтних підприємствах за рахунок автоматизації контролю, відновлення придатних деталей та уникнення передчасних відмов навігаційних приладів.

  • Roundtable Discussion "Experimental and Numerical Studies of the Strength and Tribological Properties of Composite Materials"

    by Kateryna Chava, Oksana Mikosianchyk, Sergii Boichenko, Yevhen Pedan, Anton Balalaiev, Oleksandr Yakobchuk, Ruslan Kostyunik

    This volume presents the materials of the roundtable discussion “Experimental and Numerical Studies of the Strength and Tribological Properties of Composite Materials.” The meeting addressed major scientific and technological achievements in the field of experimental and numerical investigations of composite materials and tribology. The contributions included in this collection consider current issues related to the strength and tribological properties of composite materials used in aviation. Particular attention is given to the impact resistance of composites, the strength of high-pressure spherical composite vessels, and other relevant problems in the field of composite material mechanics and tribology

  • RESEARCH ON THE ANTI-WEAR PROPERTIES OF F-35 AVIATION KEROSENE UNDER SLIDING FRICTION CONDITIONS

    by Serhii Boichenko, Iryna Shkilniuk, Ruslan Kostyunik, Vitalii Korovushkin, Kostiantyn Lutchenko

    The aim is to investigate the wear process of a model sliding contact assembly in the environment of a conventional aviation fuel for comparative analysis with fuel mixtures containing experimental bio-additives and to assess their ability to form protective films that reduce friction force and wear intensity. Methodology: Five repeated four-stage sliding tests were conducted on the NAU-01 complex using the AСК-01 tribometer at axial load 100 N and sliding speed 0.3 m/s. Specimens were ShKh15 steel (HRC 58–63) finished to Ra ≈ 0.02 μm. Measured parameters included profilometric linear wear, gravimetric mass loss (analytical balance resolution 0.0001 g), worn volume computed from segment geometry, and wear-track morphology by SEM. Results: Mean total linear wear was 24.89 μm; maximum mean worn volume ≈ 0.053 mm³. Gravimetric losses were 0.0001–0.0002 g for counter-samples and 0.0003–0.0012 g for flat specimens, indicating limited sensitivity of mass measurements. Bulk contact temperature rose to 36.8 °C. SEM showed mixed adhesive–abrasive mechanisms, micro-adhesion, plastic deformation and secondary tribofilm formation. Measurement uncertainties: linear ≤5%; volumetric ≤7%; gravimetric relative errors may exceed 50% at low wear. Conclusions: The four-stage protocol on NAU-01 yields reproducible, sensitive tribological indicators suitable as a reference baseline for evaluating bio-additives. Profilometry and volumetric assessments are recommended as primary metrics for fine differentiation; gravimetric data should be interpreted cautiously. Complementary EDS and XRD analyses are recommended to identify chemical and phase composition of wear products and tribofilms. The obtained reference data may be used to compare effects of experimental bio-additives under identical conditions and to guide selection of promising formulations for engine-scale testing. This article was prepared as part of a grant project of the National Research Fund of Ukraine, “Experimental and analytical foundations of the reliability of dual-use aviation equipment through the improvement of aviation fuel technology in accordance with ASTM and NATO standards” (project No. 0124U004599).

  • Open Access

    METHOD OF INCREASING THE WEAR RESISTANCE OF A NICKEL-GRAPHITE-BASED COMPOSITE PLASMA COATING BY ADDING COPPER ALLOYS

    by Oleksii Kushchev, Oleksandr Terentjev, Viktor Varchenko, Tetiana Chevichelova, Ruslan Kostyunik, Oleksandr Umanskyi

    Background. The article considers the possibility of expanding the areas of application of plasma coatings based on the nickel-graphite system by adding lead-free copper alloys to the composition, which have an affinity for the nickel shell of the nickel-graphite powder and, in addition to preserving the tribotechnical properties of nickel-graphite, can provide the necessary level of cohesion of the coating. Objective. The aim of this work is to study the effect of the content of the copper alloy CuAl10Ni5Fe4 when added to nickel-graphite (NPG-75) on the tribotechnical characteristics of the composite plasma coating. Methods. As part of the work to determine the influence of the copper alloy content in nickel-graphite on the tribotechnical properties of the plasma composite coating, friction and wear tests were conducted on samples with 35, 50, 75 and 90 wt.% copper alloy CuAl10Ni5Fe4 in nickel-clad graphite NPG-75 (75 wt.% nickel). The double copper-zinc alloy CuZn10 was used as a standard. Results. It has been experimentally established that plasma coatings based on NPG-75 with the addition of 50 wt.% CuAl10Ni5Fe4 have wear resistance increased by 10 times compared to pure NPG-75 with a friction coefficient significantly lower (0.36) than the CuZn10 standard (0.52). The coating on the counterbody of DIN C45 (hardness 45-48 HRC) is the smallest among the friction pair that were investigated in this work. Reducing the copper alloy content to 35 wt.% is impractical, since this results in active wear of the coating material and its spreading onto the counter body. Further increase in the content of CuAl10Ni5Fe4 powder in the composition leads to the occurrence of setting in the contact zone, as evidenced by a sharp (10-fold) increase in the wear of the coating samples, an increase in the temperature in the contact zone, and a ~ 2-fold increase in the friction coefficient. Conclusions. The optimal content of CuAl10Ni5Fe4 in a plasma coating based on NPG-75 is about 50 wt.%. This material allows you to reduce the friction coefficient from 0.52 (CuZn10) to 0.36 when paired with steel DIN C45. The mass wear of the steel counterbody is also significantly reduced, probably due to a change in the wear mechanism from adhesive (seizing) to oxidative wear. This allows us to significantly expand the scope of application of the Ni-C + CuAl10Ni5Fe4 material in aviation and space technology

  • Ensuring Heat Resistance of Aviation Materials Using Protective Coatings Based on ZrO2

    by Oleksandr Umanskyi, Natalia Zaichuk, Sergii Shymchuk, Ruslan Kostunik, Oleksandr Terentiev

  • An Innovative Approach to Non-Contact Cleaning of Mini-Ball Bearings

    by Ruslan Kostyunik, Oksana Mikosianchyk, Oleksandr Stelmakh, Alexey Kushchev, Sergii Shymchuk, Nataliia Zaichuk

    The bearing industry represents a critical segment of the modern economy, directly influencing the operational reliability and service life of various machines, equipment, and components employed in high-responsibility sectors of mechanical engineering and transportation infrastructure. Despite ongoing advancements and technological improvements in rolling bearing manufacturing, there remains a significant risk of residual contamination by particulates of various origins, primarily during production. This problem becomes particularly relevant in the case of miniature rolling bearings, characterized by an outer diameter of less than 30 mm. Conventional cleaning techniques currently applied in industrial practice often demonstrate limited efficiency in removing microcontaminants from hard-to-access zones within non-separable bearing assemblies. This study proposed an innovative non-contact cleaning method based on comprehensive investigations. The technique integrates the synergistic effects of pulsed alternating magnetic fields and ultrasonic excitation, offering enhanced cleaning performance without compromising the structural integrity of precision components. The results of the granulometric composition of the removed contaminant particles of ball bearings by different methods were presented. The optimum angles of bearing inclination were experimentally evaluated at various locations of ultrasonic wave radiation sources and the action of a pulsed magnetic field. The effectiveness of the developed combined method on aircraft ball bearings demonstrated its advantages in removing both large and small contaminants, confirmed by vibration diagnostics and microscopic analysis. Testing of the method at leading aircraft manufacturers underlines the practical significance of the developed approach and has the potential to significantly improve the quality, service life, and reliability of precision parts and mechanisms. Depending on the contamination degree and the bearing type, the cleaning time ranged from several seconds to 2–3 minutes, allowing the developed combined method to be integrated into the manufacturing technological cycle of rolling bearings using the necessary automated systems and equipment as the final cleaning operation. This ensures the principle of improving the innovation of production. Using ultrasonic waves allowed for the removal of the strongest films of complex structure. Overall, combining ultrasound with a pulsed magnetic turbulent cleaning method significantly increased the effectiveness of the cleaning process.


  • Open Access

    ОЦІНКА ЕФЕКТИВНОСТІ МЕТОДІВ ОЧИЩЕННЯ АВІАЦІЙНИХ ШАРИКОПІДШИПНИКІВ ЗА ЇХ ВІБРОАКУСТИЧНИМИ ХАРАКТЕРИСТИКАМИ

    by Олександр Стельмах, Руслан Костюнік, Сергій Шимчук, Олексій Кущев

    В статті приведено детальний аналіз впливу мікрозабруднень поверхонь підшипників кочення на віброакустичні показники. Досліджувались мініатюрні підшипники кочення як найбільш складні для очищення трибосистеми. В ході досліджень виявлено та висвітлено основні види дефектів, що виникають при експлуатації підшипників, які зумовлені саме мікрозабрудненнями різного роду. Детально зосереджено увагу та доведено, що форма, природа та розміри забруднень впливають на віброшвидкість та віброприскорення. Виконання теоретичних досліджень, розробка та апробація лабораторного обладнання сприяли розробці методики очищення робочих поверхонь досліджуваних шарикопідшипників. Як практичний результат роботи модернізовано лабораторний комплекс для оцінки ефективності очищення підшипників за віброакустичними параметрами та розроблено узагальнену методику очищення мініатюрних шарикопідшипників. Подальший розвиток отримали методи очищення авіаційних шарикопідшипників із застосуванням імпульсного магнітно-турбулентного та ультразвукового підходів як комплексний високопродуктивний метод очищення різного роду підшипників від забруднень металічної та неметалічної природи. Детально досліджено природу забруднень. Встановлено закономірності між розмірами забруднень та акустичними параметрами шарикопідшипників. Запропоновану систему моніторингу кулькових підшипників за віброакустичними показниками в перспективі планується впровадити на підприємствах, що виготовляють підшипники та ремонтних підприємствах як вхідний контроль та експрес-метод оцінювання їх працездатності. Ключові слова: забруднення, моніторинг, вібродіагностика, мініатюрні шарикопідшипники, очищення, мікроструктура, віброакустичні характеристики.

  • Open Access

    ЕКСПЕРИМЕНТАЛЬНЕ ВИЗНАЧЕННЯ ВПЛИВУ РОЗМІРУ ТА СКЛАДУ ЧАСТИНОК ЗАБРУДНЕНЬ НА ВІБРОАКУСТИЧНІ ХАРАКТЕРИСТИКИ МІНІАТЮРНИХ ШАРИКОПІДШИПНИКІВ У ЗБОРІ

    by Руслан Костюнік, Оксана Мікосянчик, Олександр Стельмах, Oleksiy Kuschev, Олена Ковальчук, Oksana Mikosianchyk

    Проаналізовано вплив мастильного матеріалу, мікрогеометричних характеристик поверхонь на віброакустичні показники мініатюрних підшипників кочення та наведено типи дефектів, які виникають в підшипниках при експлуатації. Наведено методику очищення робочих поверхонь авіаційних шарикопідшипників. Розроблено модернізований випробувально-вимірювальний комплекс для проведення оцінки ефективності очищення шарикопідшипників за віброакустичними параметрами. Визначено механізми очищення авіаційних шарикопідшипників імпульсним магнітно-турбулентним та ультразвуковим методами.

  • Open Access

    РЕНОВАЦІЯ ВІБРОХАРАКТЕРИСТИК МІНІАТЮРНИХ ШАРИКОПІДШИПНИКІВ ПРЕЦИЗІЙНИХ МЕХАНІЧНИХ СИСТЕМ АВІАКОСМІЧНОЇ І ВІЙСЬКОВОЇ ТЕХНІКИ

    by Олександр Стельмах, Руслан Костюнік, Сергій Шимчук, Олексій Кущев

    В статті наведено детальний аналіз існуючих діагностичних систем та визначені шляхи покращення якості оцінки віброакустичних характеристик при реновації мініатюрних та прецизійних підшипників кочення механічних систем авіакосмічної і військової техніки. Оскільки сучасні авіакосмічні прецизійні механічні системи чи високоточні пристрої оборонного призначення, що містять рухомі та обертові частини, неможливо уявити без підшипників, які реалізують просторову фіксацію обертових роторів та сприймають основну частину статичних і динамічних зусиль, то підвищення ефективності, надійності і ресурсу, а також забезпечення безвідмовної та безпечної експлуатації цих механізмів тісно пов'язане з необхідністю якісної оцінки їх технічного стану при вхідному та міжремонтному контролі. Дана робота базується на нових явищах і закономірностях, виявлених авторами, що попередньо експериментально доведено та теоретично обґрунтовано на розробленому та створеному на сучасному рівні обладнанні: трибокавітація, утримання мікро- та наночастинок феромагнітної та іншої природи забруднення магнітними полями, що притаманні деталям шарикопідшипника та ін. Ключові слова: мініатюрні та прецизійні шарикопідшипники, віброакустичні характеристики, трибосистема, момент тертя, час вибігу, мікро- та наночастинки забруднення