Daniel J. Fanna
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Daniel J. Fanna has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
Ken Moran
3 shared publications- Feng Li
School of Science, Western Sydney University, Locked Bag 1797, Penrith, New South Wales 2751, Australia
2 shared publications Laurel George
Advanced Materials Characterisation Facility (AMCF), Western Sydney University , Sydney, NSW , Australia
2 shared publications- Leonard F. Lindoy
University of Sydney
2 shared publications - Matthew J. Wallis
School of Science, Western Sydney University, Locked Bag 1797, Penrith, NSW 2751, Australia
2 shared publications Richard Wuhrer
Advanced Materials Characterisation Facility (AMCF), Western Sydney University , Sydney, NSW , Australia
2 shared publications
Latest Publications
- Top Cited PapersOpen Access
- 22 January 2025
- Published by Springer Nature in International Journal of Civil Engineering
- Vol. 23 (5) , 853-868
Effect of Metakaolin and Ground Granulated Blast Furnace Slag on the Performance of Hybrid Fibre-Reinforced Magnesium Oxychloride Cement-Based Composites
This study investigates the effect of ground granulated blast furnace slag (GGBFS) and metakaolin (MK) on the strength and ductility of magnesium oxychloride cement (MOC) based hybrid basalt and polyethylene fibre reinforced cementitious composite (FRMOC). MOC was chosen as the matrix due to its unique properties and environment friendliness as a green cement. MK and GGBFS were selected as primary additives to reinforce the MOC matrix owing to their outstanding performance in cementitious composites, coupled with their widespread availability and sustainable characteristics. The influence of GGBFS and MK on physical and mechanical properties of FRMOC was studied in this paper through extensive physical and mechanical testing and microscopic analysis. It was found that the hardened density of FRMOC was not significantly affected by these additives, and it ranged from 1909.3 to 1976.0 kg/m3, retaining its lightweight characteristics. Compressive strength of specimens cured for one day reached approximately 69.1–84.0% of that for specimens cured for 28 days, indicating the high early strength characteristics of the material. All FRMOC specimens exhibited tensile strain hardening properties, with tensile strength and strain capacity ranging from 6.74 to 8.58 MPa and 1.14 to 2.22%, respectively. The mix containing 30% GGBFS, 0.75% basalt fibre, and 1.25% polyethylene fibre was identified as the optimum MOC mix with enhanced compressive strength (73.9 MPa), tensile strength (8.52 MPa), and strain capacity (2.22%). Microscopic analysis further revealed that the addition of GGBFS-MK blends did not alter the primary phase composition of hydration products but essentially promoted the formation of phase 5, demonstrating their effectiveness in enhancing the performance of FRMOC.
- 22 January 2025
- Published by Springer Nature in International Journal of Civil Engineering
- Vol. 23 (5) , 853-868
Top Cited PapersOpen AccessEffect of Metakaolin and Ground Granulated Blast Furnace Slag on the Performance of Hybrid Fibre-Reinforced Magnesium Oxychloride Cement-Based Composites
This study investigates the effect of ground granulated blast furnace slag (GGBFS) and metakaolin (MK) on the strength and ductility of magnesium oxychloride cement (MOC) based hybrid basalt and polyethylene fibre reinforced cementitious composite (FRMOC). MOC was chosen as the matrix due to its unique properties and environment friendliness as a green cement. MK and GGBFS were selected as primary additives to reinforce the MOC matrix owing to their outstanding performance in cementitious composites, coupled with their widespread availability and sustainable characteristics. The influence of GGBFS and MK on physical and mechanical properties of FRMOC was studied in this paper through extensive physical and mechanical testing and microscopic analysis. It was found that the hardened density of FRMOC was not significantly affected by these additives, and it ranged from 1909.3 to 1976.0 kg/m3, retaining its lightweight characteristics. Compressive strength of specimens cured for one day reached approximately 69.1–84.0% of that for specimens cured for 28 days, indicating the high early strength characteristics of the material. All FRMOC specimens exhibited tensile strain hardening properties, with tensile strength and strain capacity ranging from 6.74 to 8.58 MPa and 1.14 to 2.22%, respectively. The mix containing 30% GGBFS, 0.75% basalt fibre, and 1.25% polyethylene fibre was identified as the optimum MOC mix with enhanced compressive strength (73.9 MPa), tensile strength (8.52 MPa), and strain capacity (2.22%). Microscopic analysis further revealed that the addition of GGBFS-MK blends did not alter the primary phase composition of hydration products but essentially promoted the formation of phase 5, demonstrating their effectiveness in enhancing the performance of FRMOC.
- Open Access
- 1 January 2025
- Published by ScienceOpen
- p. e393
Microanalysis and X-Ray Mapping of Plant Material: Sample Preparation, Instrument Operation and XRM Processing Considerations
The use of microanalysis and X-ray mapping (XRM) techniques to locate, identify and spatially map elements in plant materials is of growing interest in the area of plant sciences. Some recent examples include the use of XRM to examine silicon deposition in grass leaf guard cells [ 1- 2], locate calcium oxalate in Eucalyptus leaves [ 3], and assess concentrations of salts in germinating seeds [ 4] and grass leaf tissues [ 5]. The increasing use of XRM in plant sciences is in a large part due to advancements associated with instrument hardware and analysis software, reducing the analysis times needed and hence making these techniques more accessible. There is a lot to consider when preparing and analysing plant material, however, such as how the material preparation method affects the results, the SEM/XRM settings and conditions used for the analysis, and lastly the processing of the XRM results. With developments in analysis software, there is now a lot more information that can be extracted. For example, while XRM can be used to colour-code and examine the spatial distribution of elements present in a sample, the X-ray intensity distributions of the elements can also be used to generate two and three-dimensional scatter diagrams. These can then be used to identify and spatially map ratios of elements selected, and chemical phases present [ 6]. In this study, Eucalyptus robusta leaves were used to demonstrate how different sample preparation techniques (e.g. critical point dried samples versus oven dried at 60°C), and different SEM and XRM conditions (e.g. mapping carbon coated samples under high vacuum versus uncoated samples in low vacuum, and the use of different accelerating voltages) can affect XRM results obtained.
- 1 January 2025
- Published by ScienceOpen
- p. e393
Open AccessMicroanalysis and X-Ray Mapping of Plant Material: Sample Preparation, Instrument Operation and XRM Processing Considerations
The use of microanalysis and X-ray mapping (XRM) techniques to locate, identify and spatially map elements in plant materials is of growing interest in the area of plant sciences. Some recent examples include the use of XRM to examine silicon deposition in grass leaf guard cells [ 1- 2], locate calcium oxalate in Eucalyptus leaves [ 3], and assess concentrations of salts in germinating seeds [ 4] and grass leaf tissues [ 5]. The increasing use of XRM in plant sciences is in a large part due to advancements associated with instrument hardware and analysis software, reducing the analysis times needed and hence making these techniques more accessible. There is a lot to consider when preparing and analysing plant material, however, such as how the material preparation method affects the results, the SEM/XRM settings and conditions used for the analysis, and lastly the processing of the XRM results. With developments in analysis software, there is now a lot more information that can be extracted. For example, while XRM can be used to colour-code and examine the spatial distribution of elements present in a sample, the X-ray intensity distributions of the elements can also be used to generate two and three-dimensional scatter diagrams. These can then be used to identify and spatially map ratios of elements selected, and chemical phases present [ 6]. In this study, Eucalyptus robusta leaves were used to demonstrate how different sample preparation techniques (e.g. critical point dried samples versus oven dried at 60°C), and different SEM and XRM conditions (e.g. mapping carbon coated samples under high vacuum versus uncoated samples in low vacuum, and the use of different accelerating voltages) can affect XRM results obtained.
- Open Access
- 8 August 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Near-Ambient Temperature Spin Crossover Controlled via the Self-Assembly of Chiral and Racemic Polymorphs in Triazolylimine [Fe2L3](BF4)4 Helicates
Three new chiral spin crossover (SCO) dinuclear triple helicates of type [Fe2L3](BF4)4 are reported exhibiting a robust magnetic behaviour that is resistant to the effect of temperature scan rate, moisture, and light. The selective formation of racemic aggregates upon crystallization of a solution of the respective racemic complexes was associated with the helical torsion, intermetallic distance and the spatial arrangement of the enantiomers and anions. Torsional stress and hydrogen bonding interactions were related to the potential spring-like movement inherent to helically chiral systems as well as to the efficacy of cooperativity transmission. These unique structural dynamics were correlated to the display of a chirality-dependent semi-abrupt profile observed for each enantiopure aggregate. This study highlights how the molecular shape of helically chiral compounds can be altered to modulate the magnetic behaviour towards a robust and near-ambient SCO system.
- 8 August 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessNear-Ambient Temperature Spin Crossover Controlled via the Self-Assembly of Chiral and Racemic Polymorphs in Triazolylimine [Fe2L3](BF4)4 Helicates
Three new chiral spin crossover (SCO) dinuclear triple helicates of type [Fe2L3](BF4)4 are reported exhibiting a robust magnetic behaviour that is resistant to the effect of temperature scan rate, moisture, and light. The selective formation of racemic aggregates upon crystallization of a solution of the respective racemic complexes was associated with the helical torsion, intermetallic distance and the spatial arrangement of the enantiomers and anions. Torsional stress and hydrogen bonding interactions were related to the potential spring-like movement inherent to helically chiral systems as well as to the efficacy of cooperativity transmission. These unique structural dynamics were correlated to the display of a chirality-dependent semi-abrupt profile observed for each enantiopure aggregate. This study highlights how the molecular shape of helically chiral compounds can be altered to modulate the magnetic behaviour towards a robust and near-ambient SCO system.
- Open Access
- 24 July 2024
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 30 (Supplement)
Investigation of Ordinary Portland Cement Hydration Mechanisms Utilising X-ray Mapping, In Situ X-ray Diffraction and In Situ Micro-CT
Concrete is the second-most-used substance in the world, with water being the first. Cement in concrete accounts for 10-15 wt.% and the most widely used cement, is Portland Cement (PC). Consequently, PC has a high global demand with annual global production of approx. 4.6 billion tonnes with predicted growth to 6 billion tonnes by 2050 [ 1]. However, the production of PC has significant environmental impacts accounting for approx. 8% of global CO2 emissions [ 2]. For this reason, there is a considerable push to develop greener means of producing PC as well as alternative cements, including the addition of supplementary cementitious material (SCMs) to PC and other non-PC based mixtures.
- 24 July 2024
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 30 (Supplement)
Open AccessInvestigation of Ordinary Portland Cement Hydration Mechanisms Utilising X-ray Mapping, In Situ X-ray Diffraction and In Situ Micro-CT
Concrete is the second-most-used substance in the world, with water being the first. Cement in concrete accounts for 10-15 wt.% and the most widely used cement, is Portland Cement (PC). Consequently, PC has a high global demand with annual global production of approx. 4.6 billion tonnes with predicted growth to 6 billion tonnes by 2050 [ 1]. However, the production of PC has significant environmental impacts accounting for approx. 8% of global CO2 emissions [ 2]. For this reason, there is a considerable push to develop greener means of producing PC as well as alternative cements, including the addition of supplementary cementitious material (SCMs) to PC and other non-PC based mixtures.
- Open Access
- 22 July 2023
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 29 (Supplement) , 165-167
Long-term in situ X-ray Diffraction Studies on Ordinary Portland Cement Hydration with Correlative X-Ray Mapping
Globally, Portland cement (PC) is one of the most consumed materials with annual global production of approximately 4.6 billion tonnes and global demand is predicted to increase to 6 billion tonnes by 2050 [ 1]. However, the production of PC has significant environmental impacts and is currently responsible for approximately 8% of global CO2 emissions [ 2]. For this reason, the development of greener means for producing PC, as well as alternative cements, have become a burgeoning field of research with considerable attention. Furthermore, the hydration reaction mechanisms in PC are still not fully understood and the curing reactions in many alternative cements also require further investigation.
- 22 July 2023
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 29 (Supplement) , 165-167
Open AccessLong-term in situ X-ray Diffraction Studies on Ordinary Portland Cement Hydration with Correlative X-Ray Mapping
Globally, Portland cement (PC) is one of the most consumed materials with annual global production of approximately 4.6 billion tonnes and global demand is predicted to increase to 6 billion tonnes by 2050 [ 1]. However, the production of PC has significant environmental impacts and is currently responsible for approximately 8% of global CO2 emissions [ 2]. For this reason, the development of greener means for producing PC, as well as alternative cements, have become a burgeoning field of research with considerable attention. Furthermore, the hydration reaction mechanisms in PC are still not fully understood and the curing reactions in many alternative cements also require further investigation.
- Open Access
Self-Assembly of a Rare High Spin FeII/PdII Tetradecanuclear Cubic Cage Constructed via the Metalloligand Approach
Polynuclear heterobimetallic coordination cages in which different metal cations are connected within a ligand scaffold are known to adopt a variety of polyhedral architectures, many of which display interesting functions. Within the extensive array of coordination cages incorporating Fe(II) centres reported so far, the majority contain low-spin (LS) Fe(II), with high-spin (HS) Fe(II) being less common. Herein, we present the synthesis and characterisation of a new tetradecanuclear heterobimetallic [Fe8Pd6L8](BF4]28 (1) cubic cage utilising the metalloligand approach. Use of the tripodal tris-imidazolimine derivative (2) permitted the formation of the tripodal HS Fe(II) metalloligand [FeL](BF4)2·CH3OH (3) that was subsequently used to form the coordination cage 1. Magnetic and structural analyses gave insight into the manner in which the HS environment of the metalloligand was transferred into the cage architecture along with the structural changes that accompanied its occupancy of the eight corners of the discrete cubic structure.
Open AccessSelf-Assembly of a Rare High Spin FeII/PdII Tetradecanuclear Cubic Cage Constructed via the Metalloligand Approach
Polynuclear heterobimetallic coordination cages in which different metal cations are connected within a ligand scaffold are known to adopt a variety of polyhedral architectures, many of which display interesting functions. Within the extensive array of coordination cages incorporating Fe(II) centres reported so far, the majority contain low-spin (LS) Fe(II), with high-spin (HS) Fe(II) being less common. Herein, we present the synthesis and characterisation of a new tetradecanuclear heterobimetallic [Fe8Pd6L8](BF4]28 (1) cubic cage utilising the metalloligand approach. Use of the tripodal tris-imidazolimine derivative (2) permitted the formation of the tripodal HS Fe(II) metalloligand [FeL](BF4)2·CH3OH (3) that was subsequently used to form the coordination cage 1. Magnetic and structural analyses gave insight into the manner in which the HS environment of the metalloligand was transferred into the cage architecture along with the structural changes that accompanied its occupancy of the eight corners of the discrete cubic structure.