Abstract
The use of microanalysis and X-ray mapping (XRM) techniques to locate, identify and spatially map elements in plant materials is of growing interest in the area of plant sciences. Some recent examples include the use of XRM to examine silicon deposition in grass leaf guard cells [ 1- 2], locate calcium oxalate in Eucalyptus leaves [ 3], and assess concentrations of salts in germinating seeds [ 4] and grass leaf tissues [ 5]. The increasing use of XRM in plant sciences is in a large part due to advancements associated with instrument hardware and analysis software, reducing the analysis times needed and hence making these techniques more accessible. There is a lot to consider when preparing and analysing plant material, however, such as how the material preparation method affects the results, the SEM/XRM settings and conditions used for the analysis, and lastly the processing of the XRM results. With developments in analysis software, there is now a lot more information that can be extracted. For example, while XRM can be used to colour-code and examine the spatial distribution of elements present in a sample, the X-ray intensity distributions of the elements can also be used to generate two and three-dimensional scatter diagrams. These can then be used to identify and spatially map ratios of elements selected, and chemical phases present [ 6]. In this study, Eucalyptus robusta leaves were used to demonstrate how different sample preparation techniques (e.g. critical point dried samples versus oven dried at 60°C), and different SEM and XRM conditions (e.g. mapping carbon coated samples under high vacuum versus uncoated samples in low vacuum, and the use of different accelerating voltages) can affect XRM results obtained.