ZTZhenning Tao

Zhenning Tao

*This is an algorithmically generated author record based on publicly available information.

Zhenning Tao has a total of 57 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Coherent Optical Transmitter Assessment Based on Noise Spectrum Measurement Using Probability-Maintained Notch Sequences

    by Jingnan Li, Tong Ye, Hisao Nakashima, Takeshi Hoshida, Yasuhiko Aoki, Zhenning Tao, Yojiro Mori, Hiroshi Hasegawa

    A practical and accurate method for coherent optical transmitter assessment is crucial. Compared with conventional receiver-based methods which rely on expensive high-speed oscilloscopes and the specific receiver digital signal processing (DSP), spectrum analyzers offer a direct, robust, DSP-independent and low-cost approach for transmitter assessment based on noise spectrum measurement in which the stimulus plays an important role. In this study, the probability-maintained (PM) notch sequence as a novel stimulus is proposed, whose probability density function is identical to that of a standard 64-array quadrature amplitude modulation signal and whose power spectral density has a deep notch of 25 dB. By applying the proposed PM notch sequence, the noise spectrum of the coherent optical transmitter can be measured using an optical spectrum analyzer, in which the regrowth frequency components in the notch region of a double-side PM notch indicate the nonlinear distortion while the spectrum difference between double-side and single-side PM notches reveals the in-phase/quadrature imbalance. The performance of the coherent optical transmitter is assessed by establishing an equivalent additive noise model based on the measured noise spectrum. The proposed method demonstrates an accuracy within 0.3 dB compared to the Q factor obtained by a coherent optical receiver.

  • Open Access

    In-Service Monitoring of a 100 Gbaud-Class Coherent Transmitter Using a 5 GHz Photodetector

    by Ke Zhang, Tong Ye, Jingnan Li, Hisao Nakashima, Shinsuke Tanaka, Takeshi Hoshida, Zhenning Tao

    Device imperfections are the main limitation in high baud rate coherent transmitters. Because these imperfections vary with temperature and age, an in-service monitoring system is necessary. With the monitored information, such imperfections can be compensated for using classic technologies. Considering cost and power consumption, a monitor using a low-bandwidth observation channel (OC) composed of photodetector (PD) and monitor circuit is preferred. However, implementing such a monitor is challenging. Even when only linear imperfections are considered, they affect the amplitude and phase of the modulated optical signal, while the PD detects only the amplitude. Additionally, the flexibility to design test signals is lost during the in-service stage. Using an algorithm developed for system identification of a Wiener–Hammerstein model when the memoryless nonlinear function is known, it is possible to monitor the linear imperfections of a coherent transmitter with a low bandwidth OC. In this study, we present experimental verification of such a low-bandwidth OC monitor. The linear characteristics and imperfections of a 96 Gbaud coherent transmitter are monitored using a 5 GHz PD. The normalized mean square error is −23 dB. With imperfection compensation based on the monitored information, the system Q factor is only 0.5 dB lower than the ideal compensation. One disadvantage of this low-cost and low-power consumption monitor is its slow convergence speed, which is attributed to the low OC bandwidth. However, a convergence time of 0.5 ms is achieved when using a 5 GHz PD, which is still acceptable for monitoring purposes because the imperfections change with temperature, and temperature stability occurs on the millisecond scale. This drawback is analyzed through theoretical derivation and simulation, and is attributed to the gradient vanishing effect caused by the limited OC bandwidth.


  • Open Access

    Behavior Model and Nonlinear Distortion Characterization of PAM Optical DAC Transmitter

    by Tong Ye, Ke Zhang, Xiaofei Su, Jingnan Li, Shiyu Shi, Yangyang Fan, Shinsuke Tanaka, Yohei Sobu, Motoyuki Nishizawa, Hisao Nakashima, et al.

    Optical digital-to-analog converter (DAC) transmitters exhibit great potential for saving power consumption and reducing footprint. However, the novel architecture of these optical transmitters introduces risks to signal performance due to inconsistencies in the responses among modulation segments. In this paper, a bit-dependent impulse model is proposed to characterize both the linear behavior and nonlinear distortions of N-bit pulse amplitude modulation (PAM) optical DAC transmitters. By applying minimum mean square error (MSE) criterion to the proposed model, the linear behavior, nonlinear noise spectrum, and nonlinear signal-to-noise ratio (SNR) are derived. Experiments on a Si-based PAM4 optical DAC transmitter, incorporating various impairments, demonstrate that the proposed model and distortion theory accurately characterize the linear response and nonlinear noise. Across all 48 investigated scenarios, the normalized mean square errors (NMSEs) between theoretical best linear approximations and measured values are below −17.5 dB. Nonlinear SNRs are also predicted with small errors of 0.65 dB across a 15 dB dynamic range. Furthermore, the proposed distortion theory provides a quantifiable criterion for bit-segment mapping, which can mitigate the nonlinearity of optical DAC transmitters.


  • Open Access

    Deep-Depth Probability-Maintained Notch Enabling Nonlinear Distortion Measurement for Various Modulation Formats

    by Jingnan Li, Tong Ye, Xiaofei Su, Yangyang Fan, Ke Zhang, Shiyu Shi, Hisao Nakashima, Takeshi Hoshida, Zhenning Tao, Yojiro Mori, et al.

    Nonlinear distortion is critical for optical communication systems with a high baud rate and a high-order modulation format. Thus, a simple and accurate method to measure the nonlinear distortion is highly desired. Although simple notch, which directly removes the certain frequency components of nonlinear system input and then measures the regrowth components of nonlinear system output, is straightforward to measure nonlinear distortion, it is only applicable to the Gaussian signal. However, pulse amplitude modulation (PAM) and quadrature amplitude modulation (QAM), which are widely used in communication systems, are not Gaussian signals. In this study, we propose a deep-depth probability-maintained notch generation method for the PAM to accurately characterize the nonlinear distortion based on the signal spectrum measurement. Employing the proposed time order perturbation, the notch depth for PAM2/4/8 achieves 20/24/28 dB, which allows for a large dynamic range nonlinear distortion measurement for various modulation formats. The experiment demonstrates that the nonlinear noise power ratios are measured within a root mean square error of 0.6 dB for the uniform PAM2/4/8 as well as the probabilistic shaped PAM4/8. The proposed method is also applicable to square QAM formats because a square QAM is composed of two independent PAMs.


  • Top Cited Papers
    Open Access

    Roadmap on optical communications

    by Erik Agrell, Magnus Karlsson, Francesco Poletti, Shu Namiki, Xi (Vivian) Chen, Leslie A Rusch, Benjamin Puttnam, Polina Bayvel, Laurent Schmalen, Zhenning Tao, et al.

    The Covid-19 pandemic showed forcefully the fundamental importance broadband data communication and the internet has in our society. Optical communications forms the undisputable backbone of this critical infrastructure, and it is supported by an interdisciplinary research community striving to improve and develop it further. Since the first ‘Roadmap of optical communications’ was published in 2016, the field has seen significant progress in all areas, and time is ripe for an update of the research status. The optical communications area has become increasingly diverse, covering research in fundamental physics and materials science, high-speed electronics and photonics, signal processing and coding, and communication systems and networks. This roadmap describes state-of-the-art and future outlooks in the optical communications field. The article is divided into 20 sections on selected areas, each written by a leading expert in that area. The sections are thematically grouped into four parts with 4–6 sections each, covering, respectively, hardware, algorithms, networks and systems. Each section describes the current status, the future challenges, and development needed to meet said challenges in their area. As a whole, this roadmap provides a comprehensive and unprecedented overview of the contemporary optical communications research, and should be essential reading for researchers at any level active in this field.


  • Open Access

    Characterization of Nonlinear Distortion in Intensity Modulation and Direct Detection Systems

    by Jingnan Li, Xiaofei Su, Tong Ye, Hisao Nakashima, Takeshi Hoshida, Zhenning Tao

    Intensity modulation and direct detection (IM-DD) systems are widely used in short-reach optical networks. Thus, developing a practical and accurate method to characterize nonlinear distortion and to estimate system performance is essential, as this is the foundation of IM-DD system design. The amount of nonlinear distortion can be characterized using the noise-to-power ratio (NPR). Although measuring the NPR using a notch requires only a spectrum analyzer, this method cannot be applied to a nonlinear system with non-Gaussian stimuli in general. We employ the method of measuring the NPR using a notch to characterize the nonlinear distortion in directly modulated distributed feedback (DM-DFB) laser-based IM-DD systems. Nonlinear distortion in these IM-DD systems can be attributed to two specific mechanisms: the imperfect power–current characteristic of the DM-DFB laser and the interaction among the modulation, chromatic dispersion (CD), and detection. Experimental results demonstrated that the nonlinear distortion can be accurately characterized with a mean absolute error of 0.47 dB, even when the stimuli are pulse amplitude modulation. The system performance subjected to nonlinearity could be estimated by the equivalent additive noise model. Besides, the method of measuring the NPR using a notch is also effective when the Mach–Zehnder modulator-based IM-DD system has nonnegligible CD. However, it failed in the case of negligible CD. Considering that this method is not always effective, we analyzed the attributes of various nonlinear systems and found that the above method is applicable only to systems dominated by second-order nonlinearity.


  • Open Access

    Nonlinear noise spectrum measurement using a probability-maintained noise power ratio method

    by Tong Ye, Xiaofei Su, Ke Zhang, Chengwu Yang, Jingnan Li, Yangyang Fan, Hisao Nakashima, Takeshi Hoshida, Zhenning Tao

    Nonlinear distortion (noise) limits many communication systems, demanding a means of estimating system performance via device nonlinear characteristics. The noise power ratio (NPR) method which was proposed in 1971 solves this problem for systems with Gaussian stimuli or with special nonlinearity, but practical and accurate methods for many communication systems with non-Gaussian stimuli are rare. Here we propose a probability-maintained (PM) NPR method to accurately measure the spectrum of nonlinear noise via a spectrum analyzer in non-specific systems, including systems with non-Gaussian stimuli. Using an equivalent additive noise model in which the spectrum of equivalent nonlinear noise is the measurement result of PM NPRs, nonlinear system performance could be estimated with an error of 0.5 dB. Further, we find that zero-mean Chi-square noise, instead of Gaussian noise, should be selected for large memory and low-order nonlinear systems. Our method is verified in seven different scenarios with various nonlinear mechanisms and communication applications.


  • Open Access

    Characterization, Measurement and Specification of Device Imperfections in Optical Coherent Transceivers

    by Zhenning Tao, Yangyang Fan, Xiaofei Su, Ke Zhang, Chengwu Yang, Tong Ye, Jingnan Li, Hisao Nakashima, Takeshi Hoshida

    Transceiver imperfections become the primary source of impairment as baud rate and modulation order grow in advanced optical coherent communications. Thus, transceiver imperfections, both linear and nonlinear, need to be appropriately characterized, measured, and specified. Treatments for linear imperfections are relatively mature. This study reviews the transceivers linear imperfection modeling, characterization, and measurement technologies. In practical applications, in-field measurement using the transceiver and a few low speed additional devices is preferred. In the case of nonlinear imperfections, the situation is complex. One important task is to estimate the nonlinear system performance from the nonlinear characteristics of the devices. In this study, we attempt to establish a connection between them by examining different technologies. Although the orthogonal component has a good correlation with nonlinear system performance, its measurement is prohibitively complex. In the nonlinear noise to power ratio measurement, a certain frequency component of the input signal is notched, and the re-growth component at the notch frequency is measured at the nonlinear device output. The ratio between the re-growth component power and the output signal power is the noise to power ratio. While this method is easy to carry out, it does not correctly estimate nonlinear impairment in general. The reason for this is that the signal incurs different nonlinear responses in two conditions, i.e., with or without a notch. This method accurately estimates the nonlinear impairment in some special but useful cases, such as Gaussian input signals and nonlinear systems whose dominant nonlinear term is the even order term.


  • How to Connect Device Nonlinear Specification and System Nonlinear Penalty

    by Zhenning Tao, Ke Zhang, Chengwu Yang, Xiaofei Su, Tong Ye, Hisao Nakashima, Takeshi Hoshida

    From system design point of view, it’s required to estimate nonlinear system performance from device nonlinear specification. We discuss various technologies about this topic and find the problem is only partially solved.


  • In-field Calibration of Phase Response of Optical Transmitter Using Built-in Monitor Photodiode

    by Yangyang Fan, Zhenning Tao, Hisao Nakashima, Takeshi Hoshida

    The in-field calibration of the phase response of high-capacity optical transmitters is proposed with the assistance of the narrow-band photodiode built in Mach-Zehnder modulator. The ±1° measurement error within signal bandwidth is experimentally demonstrated.