Fan Bai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Fan Bai has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Yan Liu
State Key Laboratory of Explosion Science and Safety Protection, Beijing Institute of Technology, Beijing 100081, China
3 shared publications Fenglei Huang
1 shared publication- Fenglei Huang
State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China
1 shared publication - Hao Yu
State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology 1 , Beijing 100081, People’s Republic of China
1 shared publication Hongfu Wang
1 shared publication- Junbo Yan
State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China
1 shared publication
Latest Publications
- 1 September 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (9)
Theoretical analysis and validation of the detonation wave interaction based on an overdriven detonation
The oblique collision and reflection of a detonation wave can lead to extremely high pressure and considerable dynamic load mixing in the resulting product, which has been a focus of research in detonation and defense applications. In this paper, the relationships among wave velocity, mass velocity, pressure, and the specific volume of detonation products (DPs) under overdriven detonation (ODD) conditions are analyzed. Additionally, the equations of state (EOS) of the ODD are calibrated by using real-coded genetic algorithms combined with experimental Hugoniot strong detonation data, and the effects of different DPs on pressure accuracy are assessed. Accordingly, a dynamic evolution model of detonation wave interactions in a collision zone is established, and theoretical calculations of regular and Mach reflections occurring after the interactions of typical condensed explosive [such as PBX9501 (95% HMX, 2.5% Estane, 2.5% BDNPA/F)] detonation waves are carried out. The results show that the overpressure Hugoniot data and the isentropic expansion line can be better fitted by using the JWL (Jones–Wilkins–Lee) + γ equation than other EOSs, and the deviation of the calculated pressure and the height of the Mach stem from the experimental value is within 5%. Additionally, a formula is derived for the slow-variable function k(ξ) by combining the improved Whitham method and the JWL + γ EOS, and a propagation law is obtained for the detonation wave interaction.
- 1 September 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (9)
Theoretical analysis and validation of the detonation wave interaction based on an overdriven detonation
The oblique collision and reflection of a detonation wave can lead to extremely high pressure and considerable dynamic load mixing in the resulting product, which has been a focus of research in detonation and defense applications. In this paper, the relationships among wave velocity, mass velocity, pressure, and the specific volume of detonation products (DPs) under overdriven detonation (ODD) conditions are analyzed. Additionally, the equations of state (EOS) of the ODD are calibrated by using real-coded genetic algorithms combined with experimental Hugoniot strong detonation data, and the effects of different DPs on pressure accuracy are assessed. Accordingly, a dynamic evolution model of detonation wave interactions in a collision zone is established, and theoretical calculations of regular and Mach reflections occurring after the interactions of typical condensed explosive [such as PBX9501 (95% HMX, 2.5% Estane, 2.5% BDNPA/F)] detonation waves are carried out. The results show that the overpressure Hugoniot data and the isentropic expansion line can be better fitted by using the JWL (Jones–Wilkins–Lee) + γ equation than other EOSs, and the deviation of the calculated pressure and the height of the Mach stem from the experimental value is within 5%. Additionally, a formula is derived for the slow-variable function k(ξ) by combining the improved Whitham method and the JWL + γ EOS, and a propagation law is obtained for the detonation wave interaction.
- Open Access
- 1 March 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (3)
A study on dynamic pressure sensor based on Pitot tube structure
To meet the demand for the accurate measurements of the dynamic pressure of a shock wave, a composite dynamic pressure sensor design method is proposed based on the formation mechanism, propagation characteristics, special testing environment of the dynamic pressure, and Pitot tube structure. The dynamic pressure of the shock wave is evaluated by the total pressure and static pressure units installed in the composite sensor. FLUENT simulation software was used to analyze the aerodynamic characteristics of the dynamic pressure sensor, and parameters such as the structural size and inlet position of the sensor were determined. In response to the special experimental environment of the shock wave, the requirements for the dynamic pressure measurements under damage conditions were analyzed, and a dynamic pressure testing system was established. Dynamic pressure tests with four 2,4,6-trinitrotoluene [C7H5(NO2)3] equivalents of 1, 2, 15, and 20 kg were carried out. The experimental results show that the proposed sensor design method can accurately and effectively measure the dynamic pressure signal, and the dynamic pressure gain multiple decreases with an increase in the proportional distance. This provides an effective testing method for evaluating the dynamic pressure damage effect of ammunition systems.
- 1 March 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (3)
Open AccessA study on dynamic pressure sensor based on Pitot tube structure
To meet the demand for the accurate measurements of the dynamic pressure of a shock wave, a composite dynamic pressure sensor design method is proposed based on the formation mechanism, propagation characteristics, special testing environment of the dynamic pressure, and Pitot tube structure. The dynamic pressure of the shock wave is evaluated by the total pressure and static pressure units installed in the composite sensor. FLUENT simulation software was used to analyze the aerodynamic characteristics of the dynamic pressure sensor, and parameters such as the structural size and inlet position of the sensor were determined. In response to the special experimental environment of the shock wave, the requirements for the dynamic pressure measurements under damage conditions were analyzed, and a dynamic pressure testing system was established. Dynamic pressure tests with four 2,4,6-trinitrotoluene [C7H5(NO2)3] equivalents of 1, 2, 15, and 20 kg were carried out. The experimental results show that the proposed sensor design method can accurately and effectively measure the dynamic pressure signal, and the dynamic pressure gain multiple decreases with an increase in the proportional distance. This provides an effective testing method for evaluating the dynamic pressure damage effect of ammunition systems.
- Open Access
Ballistic Performance of Polyurea-Reinforced Ceramic/Metal Armor Subjected to Projectile Impact
Although polyurea has attracted extensive attention in impact mitigation due to its protective characteristics during intensive loading, the ballistic performance of polyurea-reinforced ceramic/metal armor remains unclear. In the present study, polyurea-reinforced ceramic/metal armor with different structures was designed, including three types of coating positions of the polyurea. The ballistic tests were conducted with a ballistic gun; the samples were subjected to a tungsten projectile formed into a cylinder 8 mm in diameter and 30 mm in length, and the deformation process of the tested targets was recorded with a high-speed camera. The ballistic performance of the polyurea-reinforced ceramic/metal armor was evaluated according to mass efficiency. The damaged targets were investigated in order to determine the failure patterns and the mechanisms of interaction between the projectile and the target. A scanning electron microscope (SEM) was used to observe the microstructure of polyurea and to understand its failure mechanisms. The results showed that the mass efficiency of the polyurea-coated armor was 89% higher than that of ceramic/metal armor, which implies that polyurea-coated ceramic armor achieved higher ballistic performance with lighter mass quality than that of ceramic/metal armor. The improvement of ballistic performance was due to the energy absorbed by polyurea during glass transition. These results are promising regarding further applications of polyurea-reinforced ceramic/metal armor.
Open AccessBallistic Performance of Polyurea-Reinforced Ceramic/Metal Armor Subjected to Projectile Impact
Although polyurea has attracted extensive attention in impact mitigation due to its protective characteristics during intensive loading, the ballistic performance of polyurea-reinforced ceramic/metal armor remains unclear. In the present study, polyurea-reinforced ceramic/metal armor with different structures was designed, including three types of coating positions of the polyurea. The ballistic tests were conducted with a ballistic gun; the samples were subjected to a tungsten projectile formed into a cylinder 8 mm in diameter and 30 mm in length, and the deformation process of the tested targets was recorded with a high-speed camera. The ballistic performance of the polyurea-reinforced ceramic/metal armor was evaluated according to mass efficiency. The damaged targets were investigated in order to determine the failure patterns and the mechanisms of interaction between the projectile and the target. A scanning electron microscope (SEM) was used to observe the microstructure of polyurea and to understand its failure mechanisms. The results showed that the mass efficiency of the polyurea-coated armor was 89% higher than that of ceramic/metal armor, which implies that polyurea-coated ceramic armor achieved higher ballistic performance with lighter mass quality than that of ceramic/metal armor. The improvement of ballistic performance was due to the energy absorbed by polyurea during glass transition. These results are promising regarding further applications of polyurea-reinforced ceramic/metal armor.