Ke Heng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ke Heng has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Xin Yang
College of Electrical and Information Engineering, Hunan University, Changsha, China
7 shared publications - Xinlong Wu
College of Electrical and Information Engineering, Hunan University, Changsha, China
7 shared publications - Guoyou Liu
National Key Laboratory of Power Semiconductor and Integrated Technology, College of Semiconductors (College of Integrated Circuits), Hunan University 1 , Changsha 410082
5 shared publications Junjie Ye
College of Electrical and Information Engineering, Hunan University, Changsha, China
2 shared publications- Junjie Ye
College of Electrical and Information Engineering, Hunan University, Changsha, China
2 shared publications Xingyu Dai
Power China Zhongnan Engineering Corporation Ltd., Changsha, China
2 shared publications
Latest Publications
- 28 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 12 (1) , 1011-1019
A Time-Efficient Strain-Based Lifetime Prediction Method for Bond Wires Using Vibration Fatigue Tests and Finite Element Modeling
Failure of bond wires has become one of the main failure mechanisms of power modules. Rapid assessment of bond wires becomes increasingly important to satisfy the high-reliability requirements of new module products and shorten their development cycles to market. However, most of preliminary lifetime evaluation methods for bond wires are mainly through time-consuming and expensive power cycling (PC) tests. Herein, a time-efficient lifetime prediction method for bond wires in IGBT modules is proposed to rapidly and economically evaluate the preliminary lifetime. The accurate transient thermo-mechanical FEM simulation is established, which is calibrated by infrared temperature measurement experiments and laser displacement experiments. In this way, the actual strain distribution on bond wires can be yielded and more importantly, the plastic strain and elastic strain of bond wires that cannot be directly measured during normal PC tests can be accurately extracted. Then, four groups of vibration fatigue tests of different geometries of bond wires are meticulously completed for parameterization of the lifetime prediction model based on total strain. Finally, PC tests have been completed to further validate the effectiveness of the newly proposed lifetime prediction method.
- 28 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 12 (1) , 1011-1019
A Time-Efficient Strain-Based Lifetime Prediction Method for Bond Wires Using Vibration Fatigue Tests and Finite Element Modeling
Failure of bond wires has become one of the main failure mechanisms of power modules. Rapid assessment of bond wires becomes increasingly important to satisfy the high-reliability requirements of new module products and shorten their development cycles to market. However, most of preliminary lifetime evaluation methods for bond wires are mainly through time-consuming and expensive power cycling (PC) tests. Herein, a time-efficient lifetime prediction method for bond wires in IGBT modules is proposed to rapidly and economically evaluate the preliminary lifetime. The accurate transient thermo-mechanical FEM simulation is established, which is calibrated by infrared temperature measurement experiments and laser displacement experiments. In this way, the actual strain distribution on bond wires can be yielded and more importantly, the plastic strain and elastic strain of bond wires that cannot be directly measured during normal PC tests can be accurately extracted. Then, four groups of vibration fatigue tests of different geometries of bond wires are meticulously completed for parameterization of the lifetime prediction model based on total strain. Finally, PC tests have been completed to further validate the effectiveness of the newly proposed lifetime prediction method.
- 2 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 11 (6) , 5863-5876
Distributed Thermal Modeling for Power Devices and Modules With Equivalent Heat Flow Path Extraction
Dynamic temperature information at critical locations has been a critical indicator to safely utilize power devices and modules. However, most of existing three-dimensional (3-D) thermal modeling methods are time-consuming and complicated, which seriously limits their application in practical temperature distribution estimation. Assisted by finite-element method (FEM), the proposed distributed thermal model takes the cross-coupling effects into account among multiple heat sources. Based on the extracted equivalent heat flow paths from FEM steady-state thermal simulations, a novel method of extracting thermal resistance and thermal capacitance ( RC ) is presented for yielding temperatures at critical positions. More importantly, FEM and experimental results successfully prove the effectiveness of our proposed distributed model in accurately simulating the temperature distribution information, for different monitoring points on a single chip as well as different chips in a power module. Compared with prior-art 3-D thermal modeling methods, the time-cost to establish our model is considerably lowered as the transient temperature responses and thermal impedance matrix are no longer required. Meanwhile, reduction in the number of RC parameters simplifies the identification process, which further improves the practicability and generalization ability of the proposed distributed thermal model.
- 2 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 11 (6) , 5863-5876
Distributed Thermal Modeling for Power Devices and Modules With Equivalent Heat Flow Path Extraction
Dynamic temperature information at critical locations has been a critical indicator to safely utilize power devices and modules. However, most of existing three-dimensional (3-D) thermal modeling methods are time-consuming and complicated, which seriously limits their application in practical temperature distribution estimation. Assisted by finite-element method (FEM), the proposed distributed thermal model takes the cross-coupling effects into account among multiple heat sources. Based on the extracted equivalent heat flow paths from FEM steady-state thermal simulations, a novel method of extracting thermal resistance and thermal capacitance ( RC ) is presented for yielding temperatures at critical positions. More importantly, FEM and experimental results successfully prove the effectiveness of our proposed distributed model in accurately simulating the temperature distribution information, for different monitoring points on a single chip as well as different chips in a power module. Compared with prior-art 3-D thermal modeling methods, the time-cost to establish our model is considerably lowered as the transient temperature responses and thermal impedance matrix are no longer required. Meanwhile, reduction in the number of RC parameters simplifies the identification process, which further improves the practicability and generalization ability of the proposed distributed thermal model.
- 5 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (10) , 13099-13110
Lifetime Prediction for Lift-off of Bond Wires in IGBTs Using Paris Law With Analytical Calculation of Crack Length
Lift-off of aluminum bond wires is one of the main failure mechanisms of IGBT modules. Its root cause is the crack propagation, which causes reduction in the contact area of bond wires at the bond-metallization interface. Thus, lifetime prediction based on the classic Paris law is very appealing due to its capability to account for such a failure mechanism. However, Paris law is currently restricted due to its dependency on inaccurate but expensive means to observe the crack rate. In this paper, an analytical calculation method for the crack length of bond wires is proposed by the degradation curves of VCE,on measured during normal power cycling (PC) tests. The dye-and-pry method has been used to measure crack lengths to further validate the proposed analytical calculation method. The proposed analytical calculation method can avoid time-consuming measurement of crack length, and can economically calibrate the key constants c and m of Paris law, which has been employed to predict the lifetime of bond wires of IGBT modules by finite element method. Finally, the calibrated values of c and m make Paris law have better applicability to predict the lifetime of bond wires comparing c and m values reported in existing papers.
- 5 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (10) , 13099-13110
Lifetime Prediction for Lift-off of Bond Wires in IGBTs Using Paris Law With Analytical Calculation of Crack Length
Lift-off of aluminum bond wires is one of the main failure mechanisms of IGBT modules. Its root cause is the crack propagation, which causes reduction in the contact area of bond wires at the bond-metallization interface. Thus, lifetime prediction based on the classic Paris law is very appealing due to its capability to account for such a failure mechanism. However, Paris law is currently restricted due to its dependency on inaccurate but expensive means to observe the crack rate. In this paper, an analytical calculation method for the crack length of bond wires is proposed by the degradation curves of VCE,on measured during normal power cycling (PC) tests. The dye-and-pry method has been used to measure crack lengths to further validate the proposed analytical calculation method. The proposed analytical calculation method can avoid time-consuming measurement of crack length, and can economically calibrate the key constants c and m of Paris law, which has been employed to predict the lifetime of bond wires of IGBT modules by finite element method. Finally, the calibrated values of c and m make Paris law have better applicability to predict the lifetime of bond wires comparing c and m values reported in existing papers.
- 13 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 11 (3) , 3468-3479
A Computationally Efficient IGBT Lifetime Prediction Method Based on Successive Initiation Technique by Iteratively Using Clech Algorithm
Thermal-mechanical coupled models built by finite element analysis (FEA) software are attractive due to its excellent capability to calculate thermal/mechanical behaviors of the material interfaces inside the power module. However, these FEA-based approaches will consume enormous computational resources, resulting in unacceptably long simulation times. Herein, a computationally efficient and accurate IGBT lifetime prediction method enabling explicit emulation of solder layer degradation is proposed with the assistance of Clech algorithm. The variation of assembly stiffness K and imposed strain D in Clech algorithm with the geometrical variation during the solder layer degradation is particularly considered. A look-up table of K and D changing with crack propagation is established to calculate viscoplastic strain energy density Δ W (VSED) of the critical elements across the crack path. This improved process is applied for lifetime consumption calculation of each successive run. It remarkably reduces the simulation costs compared to that based on FEA. Finally, two sets of experimental results verify high prediction accuracy and low time-consuming cost of the proposed method.
- 13 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 11 (3) , 3468-3479
A Computationally Efficient IGBT Lifetime Prediction Method Based on Successive Initiation Technique by Iteratively Using Clech Algorithm
Thermal-mechanical coupled models built by finite element analysis (FEA) software are attractive due to its excellent capability to calculate thermal/mechanical behaviors of the material interfaces inside the power module. However, these FEA-based approaches will consume enormous computational resources, resulting in unacceptably long simulation times. Herein, a computationally efficient and accurate IGBT lifetime prediction method enabling explicit emulation of solder layer degradation is proposed with the assistance of Clech algorithm. The variation of assembly stiffness K and imposed strain D in Clech algorithm with the geometrical variation during the solder layer degradation is particularly considered. A look-up table of K and D changing with crack propagation is established to calculate viscoplastic strain energy density Δ W (VSED) of the critical elements across the crack path. This improved process is applied for lifetime consumption calculation of each successive run. It remarkably reduces the simulation costs compared to that based on FEA. Finally, two sets of experimental results verify high prediction accuracy and low time-consuming cost of the proposed method.
- 12 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (2) , 653-661
A 3-D Thermal Network Model for Monitoring of IGBT Modules
With the continuous improvement of power densities and power levels for power converters, temperature information at critical sites of the power modules has become essential in health monitoring and thermal management. However, existing thermal models often ignore the temperature distributions of the chip and rarely discuss their applicability under high-temperature operation conditions. Here, a novel 3-D physical RC network model is proposed for insulated-gate bipolar transistor (IGBT) modules, which considers the temperature effects. This model can be efficiently and conveniently obtained with the assistance of finite-element method (FEM) steady-state thermal simulations. Based on the heat flux curves inside the power module, a novel method for 3-D RC parameters extraction is presented to monitor the temperatures at critical sites of the IGBT chip, and meanwhile, the temperature effects and uneven power loss distribution on the chip are considered. Compared with the prior-art Foster-type temperature-dependent 3-D thermal models, the modeling time cost for the proposed model has been remarkably reduced under the same computing hardware facilities since the temperature responses are no longer needed. Finally, FEM simulation and experimental results verify the effectiveness and accuracy of the proposed 3-D physical RC network model.
- 12 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (2) , 653-661
A 3-D Thermal Network Model for Monitoring of IGBT Modules
With the continuous improvement of power densities and power levels for power converters, temperature information at critical sites of the power modules has become essential in health monitoring and thermal management. However, existing thermal models often ignore the temperature distributions of the chip and rarely discuss their applicability under high-temperature operation conditions. Here, a novel 3-D physical RC network model is proposed for insulated-gate bipolar transistor (IGBT) modules, which considers the temperature effects. This model can be efficiently and conveniently obtained with the assistance of finite-element method (FEM) steady-state thermal simulations. Based on the heat flux curves inside the power module, a novel method for 3-D RC parameters extraction is presented to monitor the temperatures at critical sites of the IGBT chip, and meanwhile, the temperature effects and uneven power loss distribution on the chip are considered. Compared with the prior-art Foster-type temperature-dependent 3-D thermal models, the modeling time cost for the proposed model has been remarkably reduced under the same computing hardware facilities since the temperature responses are no longer needed. Finally, FEM simulation and experimental results verify the effectiveness and accuracy of the proposed 3-D physical RC network model.
- 29 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (8) , 4444-4452
A Temperature-Dependent Physical Thermal Network Model Including Thermal Boundary Conditions for SiC MOSFET Module
SiC MOSFETs have received great attention due to their excellent electrothermal properties. Accurate junction temperature information of SiC MOSFETs ensures safe operation and helps effective thermal management. However, the existing thermal models have limits to correctly predict the thermal behaviors, whose parameter extraction processes are normally complicated. Most of the thermal models generally omit the temperature effects, which greatly impairs their usefulness and effectiveness. Here, a temperature-dependent physical resistor–capacitor ( RC ) network model is proposed, which can accurately characterize the thermal behavior of SiC MOSFETs particularly under high-temperature conditions. Meanwhile, the boundary conditions are fully investigated and modeled, which guarantees the adaptation of the proposed model for different real-field applications. The proposed method can remarkably simplify the process of parameter extraction since only the steady-state temperature distribution information is required with the assistance of finite-element method (FEM). Finally, the effectiveness and the robustness of the proposed model are validated by FEM simulation and experiments.
- 29 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (8) , 4444-4452
A Temperature-Dependent Physical Thermal Network Model Including Thermal Boundary Conditions for SiC MOSFET Module
SiC MOSFETs have received great attention due to their excellent electrothermal properties. Accurate junction temperature information of SiC MOSFETs ensures safe operation and helps effective thermal management. However, the existing thermal models have limits to correctly predict the thermal behaviors, whose parameter extraction processes are normally complicated. Most of the thermal models generally omit the temperature effects, which greatly impairs their usefulness and effectiveness. Here, a temperature-dependent physical resistor–capacitor ( RC ) network model is proposed, which can accurately characterize the thermal behavior of SiC MOSFETs particularly under high-temperature conditions. Meanwhile, the boundary conditions are fully investigated and modeled, which guarantees the adaptation of the proposed model for different real-field applications. The proposed method can remarkably simplify the process of parameter extraction since only the steady-state temperature distribution information is required with the assistance of finite-element method (FEM). Finally, the effectiveness and the robustness of the proposed model are validated by FEM simulation and experiments.
- 12 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 10 (3) , 3055-3065
A Temperature-Dependent Cauer Model Simulation of IGBT Module With Analytical Thermal Impedance Characterization
In pursuit of high power density and high reliability of power converters, the junction temperature of power devices becomes an essential indicator for heath condition monitoring and thermal management. Particularly under high-temperature operating conditions, the temperature-dependent thermal properties of the chip and ceramic materials must be incorporated to enhance the prediction accuracy. In this article, an improved temperature-dependent Cauer-type thermal network of insulated-gate bipolar transistor (IGBT) module is established. The temperature dependence of thermal parameters for the chip layer and ceramic layer is meticulously considered. More importantly, finite-element method (FEM) simulation is used to yield the heat flux curve of the power module at the center line in order to better imitate the real heat-spreading scenario. In this way, the effective heat transfer area of each layer can be calculated accurately and analytically. By this analytic method, the temperature-dependent thermal impedance can be efficiently determined. Compared with prior-art fully FEM-based temperature-dependent thermal impedance characterization method, the method proposed in this article reduces the FEM simulation time cost approximately 20 times under the same computing hardware facilities and considerably simplifies the parameter extraction process. Finally, experimental results based on two commercial IGBT modules successfully validate the usefulness, effectiveness, and accuracy of the proposed thermal network model.
- 12 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 10 (3) , 3055-3065
A Temperature-Dependent Cauer Model Simulation of IGBT Module With Analytical Thermal Impedance Characterization
In pursuit of high power density and high reliability of power converters, the junction temperature of power devices becomes an essential indicator for heath condition monitoring and thermal management. Particularly under high-temperature operating conditions, the temperature-dependent thermal properties of the chip and ceramic materials must be incorporated to enhance the prediction accuracy. In this article, an improved temperature-dependent Cauer-type thermal network of insulated-gate bipolar transistor (IGBT) module is established. The temperature dependence of thermal parameters for the chip layer and ceramic layer is meticulously considered. More importantly, finite-element method (FEM) simulation is used to yield the heat flux curve of the power module at the center line in order to better imitate the real heat-spreading scenario. In this way, the effective heat transfer area of each layer can be calculated accurately and analytically. By this analytic method, the temperature-dependent thermal impedance can be efficiently determined. Compared with prior-art fully FEM-based temperature-dependent thermal impedance characterization method, the method proposed in this article reduces the FEM simulation time cost approximately 20 times under the same computing hardware facilities and considerably simplifies the parameter extraction process. Finally, experimental results based on two commercial IGBT modules successfully validate the usefulness, effectiveness, and accuracy of the proposed thermal network model.