XWXinlong Wu

Xinlong Wu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xinlong Wu has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Top Cited Papers

    Investigation on Creep-Fatigue Interaction Failure of Die-Attach Solder Layers in IGBTs Under Power Cycling

    by Shihan Zhao, Xin Yang, Xinlong Wu, Guoyou Liu

    Creep plays a significant role in the deterioration of solder layers particularly over extended periods of heating, even though numerous existing studies focused on the mechanism of fatigue failure. In this article, the creep-fatigue interaction failure mechanism of the solder layer under power cycling test (PCT) is investigated. The microstructure of solder layer was successively scanned using an ultrahigh resolution computed tomography scanner to observe the degradation of the microstructure. It is found that the microstructure of the solder layer had obvious changes even when the thermal resistance remains unchanged. The initial voids in the solder layer are constantly collapsing and new voids are constantly growing out. This is different from the previous finding that the solder layer degrades by cracks initiating and propagating under short heating in PCT. The reason for this result is that creep becomes the dominant factor in the degradation of solder layer. Scanning electron microscope (SEM) scanning of the solder layer after failure showed that microcracks also existed, but their distribution was more dispersed, making it difficult to determine their crack initiation locations and propagation paths. Therefore, the failure of the solder layer under longer heating period and higher temperatures is considered to be a complex creep-fatigue interaction failure process. Finally, a thermal resistance degradation model is proposed, which can accurately predict the change of the thermal resistance during module degradation.


  • Novel Prognostics for IGBTs Using Wire-Bond Contact Degradation Model Considering On-Chip Temperature Distribution

    by Xinlong Wu, Xin Yang, Junjie Ye, Guoyou Liu

    Remaining useful lifetime (RUL) prediction for lift-off of bond wires in IGBT modules is essential to avoid strenuous periodic maintenance and electrical accidents of IGBT-based power converters. However, existing model-driven RUL methods mostly focus on lift-off of the first bond wire and rarely consider on-chip temperature distribution, which result in low prediction accuracy. Herein, a novel prognostic method for bond wire lift-off failure in IGBT considers uneven on-chip temperature distribution during crack propagation at the bond-metallization interface (BMI), which fulfills improved prediction error for RUL. In this method, a wire-bond contact degradation model is built according to the on-chip temperature distribution. The number of power cycles as a function of the crack length and temperature swing of BMI is determined by finite element analysis and power cycling test. In this way, the equivalent resistance reflecting crack propagation at BMI can be accurately estimated, and the degradation curve of the ON-state voltage (Vce_on) can be predicted to yield RUL under the widely-acknowledged failure criteria of bond wire. The effectiveness and generalization of the proposed method are validated by additional tests and show great superiority to the prior-art condition-based RUL prediction methods.


  • A Time-Efficient Strain-Based Lifetime Prediction Method for Bond Wires Using Vibration Fatigue Tests and Finite Element Modeling

    by Junjie Ye, Xin Yang, Xingyu Dai, Xinlong Wu, Ke Heng, Guoyou Liu

    Failure of bond wires has become one of the main failure mechanisms of power modules. Rapid assessment of bond wires becomes increasingly important to satisfy the high-reliability requirements of new module products and shorten their development cycles to market. However, most of preliminary lifetime evaluation methods for bond wires are mainly through time-consuming and expensive power cycling (PC) tests. Herein, a time-efficient lifetime prediction method for bond wires in IGBT modules is proposed to rapidly and economically evaluate the preliminary lifetime. The accurate transient thermo-mechanical FEM simulation is established, which is calibrated by infrared temperature measurement experiments and laser displacement experiments. In this way, the actual strain distribution on bond wires can be yielded and more importantly, the plastic strain and elastic strain of bond wires that cannot be directly measured during normal PC tests can be accurately extracted. Then, four groups of vibration fatigue tests of different geometries of bond wires are meticulously completed for parameterization of the lifetime prediction model based on total strain. Finally, PC tests have been completed to further validate the effectiveness of the newly proposed lifetime prediction method.


  • Distributed Thermal Modeling for Power Devices and Modules With Equivalent Heat Flow Path Extraction

    by Xin Yang, Siwei Xu, Ke Heng, Xinlong Wu

    Dynamic temperature information at critical locations has been a critical indicator to safely utilize power devices and modules. However, most of existing three-dimensional (3-D) thermal modeling methods are time-consuming and complicated, which seriously limits their application in practical temperature distribution estimation. Assisted by finite-element method (FEM), the proposed distributed thermal model takes the cross-coupling effects into account among multiple heat sources. Based on the extracted equivalent heat flow paths from FEM steady-state thermal simulations, a novel method of extracting thermal resistance and thermal capacitance ( RC ) is presented for yielding temperatures at critical positions. More importantly, FEM and experimental results successfully prove the effectiveness of our proposed distributed model in accurately simulating the temperature distribution information, for different monitoring points on a single chip as well as different chips in a power module. Compared with prior-art 3-D thermal modeling methods, the time-cost to establish our model is considerably lowered as the transient temperature responses and thermal impedance matrix are no longer required. Meanwhile, reduction in the number of RC parameters simplifies the identification process, which further improves the practicability and generalization ability of the proposed distributed thermal model.


  • Failure Mode Classification of IGBT Modules Under Power Cycling Tests Based on Data-Driven Machine Learning Framework

    by Xin Yang, Yue Zhang, Xinlong Wu, Guoyou Liu

    Of great significance is knowledge of failure modes of IGBT modules under power cycling test (PCT) in advance. It can not only precisely determine accurate utilization of physics-of-failure lifetime prediction methods but also help optimize IGBT designs. However, establishing an accurate and generic offline failure mode classification method for different IGBT modules remains a challenging problem due to the complex degradation process of IGBT modules. In this article, a data-driven convolutional neural network (CNN) based method is proposed for quad-classification of failure modes for different IGBT modules under different PCT conditions. First, in order to accurately characterize the mapping between the failure modes and the precursor parameters, a framework of precursor parameters is meticulously established. Then, mainly using collected training data from existing publications, the CNN classification model is developed by a newly dynamic tuning-multilevel particle swarm-back propagation optimization algorithm. Finally, experimental PCTs of various IGBT modules are performed. The obtained PCT data and additional testing data from existing publications are used to verify the generalizability and robustness of the proposed classification method. The superiority of the proposed method is well demonstrated through comparison with random CNN, the state-of-the-art particle swarm optimization CNN, and other intelligent algorithms.


  • Lifetime Prediction for Lift-off of Bond Wires in IGBTs Using Paris Law With Analytical Calculation of Crack Length

    by Xin Yang, Junjie Ye, Xinlong Wu, Ke Heng, Yunze He, Guoyou Liu

    Lift-off of aluminum bond wires is one of the main failure mechanisms of IGBT modules. Its root cause is the crack propagation, which causes reduction in the contact area of bond wires at the bond-metallization interface. Thus, lifetime prediction based on the classic Paris law is very appealing due to its capability to account for such a failure mechanism. However, Paris law is currently restricted due to its dependency on inaccurate but expensive means to observe the crack rate. In this paper, an analytical calculation method for the crack length of bond wires is proposed by the degradation curves of VCE,on measured during normal power cycling (PC) tests. The dye-and-pry method has been used to measure crack lengths to further validate the proposed analytical calculation method. The proposed analytical calculation method can avoid time-consuming measurement of crack length, and can economically calibrate the key constants c and m of Paris law, which has been employed to predict the lifetime of bond wires of IGBT modules by finite element method. Finally, the calibrated values of c and m make Paris law have better applicability to predict the lifetime of bond wires comparing c and m values reported in existing papers.


  • A Computationally Efficient IGBT Lifetime Prediction Method Based on Successive Initiation Technique by Iteratively Using Clech Algorithm

    by Xin Yang, Xinlong Wu, Ke Heng, Guoyou Liu

    Thermal-mechanical coupled models built by finite element analysis (FEA) software are attractive due to its excellent capability to calculate thermal/mechanical behaviors of the material interfaces inside the power module. However, these FEA-based approaches will consume enormous computational resources, resulting in unacceptably long simulation times. Herein, a computationally efficient and accurate IGBT lifetime prediction method enabling explicit emulation of solder layer degradation is proposed with the assistance of Clech algorithm. The variation of assembly stiffness K and imposed strain D in Clech algorithm with the geometrical variation during the solder layer degradation is particularly considered. A look-up table of K and D changing with crack propagation is established to calculate viscoplastic strain energy density Δ W (VSED) of the critical elements across the crack path. This improved process is applied for lifetime consumption calculation of each successive run. It remarkably reduces the simulation costs compared to that based on FEA. Finally, two sets of experimental results verify high prediction accuracy and low time-consuming cost of the proposed method.


  • A 3-D Thermal Network Model for Monitoring of IGBT Modules

    by Ke Heng, Xin Yang, Xinlong Wu, Junjie Ye

    With the continuous improvement of power densities and power levels for power converters, temperature information at critical sites of the power modules has become essential in health monitoring and thermal management. However, existing thermal models often ignore the temperature distributions of the chip and rarely discuss their applicability under high-temperature operation conditions. Here, a novel 3-D physical RC network model is proposed for insulated-gate bipolar transistor (IGBT) modules, which considers the temperature effects. This model can be efficiently and conveniently obtained with the assistance of finite-element method (FEM) steady-state thermal simulations. Based on the heat flux curves inside the power module, a novel method for 3-D RC parameters extraction is presented to monitor the temperatures at critical sites of the IGBT chip, and meanwhile, the temperature effects and uneven power loss distribution on the chip are considered. Compared with the prior-art Foster-type temperature-dependent 3-D thermal models, the modeling time cost for the proposed model has been remarkably reduced under the same computing hardware facilities since the temperature responses are no longer needed. Finally, FEM simulation and experimental results verify the effectiveness and accuracy of the proposed 3-D physical RC network model.


  • A Temperature-Dependent Physical Thermal Network Model Including Thermal Boundary Conditions for SiC MOSFET Module

    by Ke Heng, Xin Yang, Xinlong Wu, Junjie Ye, Guoyou Liu

    SiC MOSFETs have received great attention due to their excellent electrothermal properties. Accurate junction temperature information of SiC MOSFETs ensures safe operation and helps effective thermal management. However, the existing thermal models have limits to correctly predict the thermal behaviors, whose parameter extraction processes are normally complicated. Most of the thermal models generally omit the temperature effects, which greatly impairs their usefulness and effectiveness. Here, a temperature-dependent physical resistor–capacitor ( RC ) network model is proposed, which can accurately characterize the thermal behavior of SiC MOSFETs particularly under high-temperature conditions. Meanwhile, the boundary conditions are fully investigated and modeled, which guarantees the adaptation of the proposed model for different real-field applications. The proposed method can remarkably simplify the process of parameter extraction since only the steady-state temperature distribution information is required with the assistance of finite-element method (FEM). Finally, the effectiveness and the robustness of the proposed model are validated by FEM simulation and experiments.