GYGuru Sreevanshu Yerragolam
Guru Sreevanshu Yerragolam
*This is an algorithmically generated author record based on publicly available information.
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Guru Sreevanshu Yerragolam has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Detlef Lohse
Physics of Fluids Group, Max Planck Center for Complex Fluid Dynamics and J. M. Burgers Centre for Fluid Dynamics, University of Twente, Enschede 7500 AE, Netherlands
6 shared publications - Roberto Verzicco
Gran Sasso Science Institute
6 shared publications - Richard Johannes Antonius Maria Stevens
Physics of Fluids Group, Max Planck Center for Complex Fluid Dynamics, J. M. Burgers Center for Fluid Dynamics, University of Twente, Enschede, the Netherlands
4 shared publications - Christopher J. Howland
Physics of Fluids Group, Max Planck Center for Complex Fluid Dynamics, J. M. Burgers Center for Fluid Dynamics, Department of Science and Technology, University of Twente, P.O. Box 217, 7500 AE Enschede, The Netherlands
2 shared publications - Olga Shishkina
Max Planck Institute for Dynamics and Self-Organization
2 shared publications - Marco De Paoli
TU Wien
1 shared publication
Latest Publications
- Open Access
- 1 October 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1020, A24
Solute mixing in porous media with dispersion and buoyancy
We analyse the process of convective mixing in two-dimensional, homogeneous and isotropic porous media with dispersion. We considered a Rayleigh–Taylor instability in which the presence of a solute produces density differences driving the flow. The effect of dispersion is modelled using an anisotropic Fickian dispersion tensor (Bear, J. Geophys. Res., vol. 66, 1961, pp. 1185–1197). In addition to molecular diffusion ( $D_m^*$ ), the solute is redistributed by an additional spreading, in longitudinal and transverse flow directions, which is quantified by the coefficients $D_l^*$ and $D_t^*$ , respectively, and it is produced by the presence of the pores. The flow is controlled by three dimensionless parameters: the Rayleigh–Darcy number $\textit{Ra}$ , defining the relative strength of convection and diffusion, and the dispersion parameters $r=D_l^*/D_t^*$ and $\varDelta =D_m^*/D_t^*$ . With the aid of numerical Darcy simulations, we investigate the mixing dynamics without and with dispersion. We find that in the absence of dispersion ( $\varDelta \to \infty$ ) the dynamics is self-similar and independent of $\textit{Ra}$ , and the flow evolves following several regimes, which we analyse. Then we analyse the effect of dispersion on the flow evolution for a fixed value of the Rayleigh–Darcy number ( $\textit{Ra}=10^4$ ). A detailed analysis of the molecular and dispersive components of the mean scalar dissipation reveals a complex interplay between flow structures and solute mixing. We find that the dispersion parameters $r$ and $\varDelta$ affect the formation of fingers and their dynamics: the lower the value of $\varDelta$ (or the larger the value of $r$ ), the wider, more convoluted and diffused the fingers. We also find that for strong anisotropy, $r=O(10)$ , the role of $\varDelta$ is crucial: except for the intermediate phases of the flow dynamics, dispersive flows show more efficient (or at least comparable) mixing than in non-dispersive systems. Finally, we look at the effect of the anisotropy ratio $r$ , and we find that it produces only second-order effects, with relevant changes limited to the intermediate phase of the flow evolution, where it appears that the mixing is more efficient for small values of anisotropy. The proposed theoretical framework, in combination with pore-scale simulations and bead packs experiments, can be used to validate and improve current dispersion models to obtain more reliable estimates of solute transport and spreading in buoyancy-driven subsurface flows.- 1 October 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1020, A24
Open AccessSolute mixing in porous media with dispersion and buoyancy
We analyse the process of convective mixing in two-dimensional, homogeneous and isotropic porous media with dispersion. We considered a Rayleigh–Taylor instability in which the presence of a solute produces density differences driving the flow. The effect of dispersion is modelled using an anisotropic Fickian dispersion tensor (Bear, J. Geophys. Res., vol. 66, 1961, pp. 1185–1197). In addition to molecular diffusion ( $D_m^*$ ), the solute is redistributed by an additional spreading, in longitudinal and transverse flow directions, which is quantified by the coefficients $D_l^*$ and $D_t^*$ , respectively, and it is produced by the presence of the pores. The flow is controlled by three dimensionless parameters: the Rayleigh–Darcy number $\textit{Ra}$ , defining the relative strength of convection and diffusion, and the dispersion parameters $r=D_l^*/D_t^*$ and $\varDelta =D_m^*/D_t^*$ . With the aid of numerical Darcy simulations, we investigate the mixing dynamics without and with dispersion. We find that in the absence of dispersion ( $\varDelta \to \infty$ ) the dynamics is self-similar and independent of $\textit{Ra}$ , and the flow evolves following several regimes, which we analyse. Then we analyse the effect of dispersion on the flow evolution for a fixed value of the Rayleigh–Darcy number ( $\textit{Ra}=10^4$ ). A detailed analysis of the molecular and dispersive components of the mean scalar dissipation reveals a complex interplay between flow structures and solute mixing. We find that the dispersion parameters $r$ and $\varDelta$ affect the formation of fingers and their dynamics: the lower the value of $\varDelta$ (or the larger the value of $r$ ), the wider, more convoluted and diffused the fingers. We also find that for strong anisotropy, $r=O(10)$ , the role of $\varDelta$ is crucial: except for the intermediate phases of the flow dynamics, dispersive flows show more efficient (or at least comparable) mixing than in non-dispersive systems. Finally, we look at the effect of the anisotropy ratio $r$ , and we find that it produces only second-order effects, with relevant changes limited to the intermediate phase of the flow evolution, where it appears that the mixing is more efficient for small values of anisotropy. The proposed theoretical framework, in combination with pore-scale simulations and bead packs experiments, can be used to validate and improve current dispersion models to obtain more reliable estimates of solute transport and spreading in buoyancy-driven subsurface flows. - Open Access
- 28 November 2024
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1000, A74
Scaling relations for heat and momentum transport in sheared Rayleigh–Bénard convection
We provide scaling relations for the Nusselt number $Nu$ and the friction coefficient $C_{S}$ in sheared Rayleigh–Bénard convection, i.e. in Rayleigh–Bénard flow with Couette- or Poiseuille-type shear forcing, by extending the Grossmann & Lohse (J. Fluid Mech., vol. 407, 2000, pp. 27–56, Phys. Rev. Lett., vol. 86, 2001, pp. 3316–3319, Phys. Rev. E, vol. 66, 2002, 016305, Phys. Fluids, vol. 16, 2004, pp. 4462–4472) theory to sheared thermal convection. The control parameters for these systems are the Rayleigh number $Ra$ , the Prandtl number $Pr$ and the Reynolds number $Re_S$ that characterises the strength of the imposed shear. By direct numerical simulations and theoretical considerations, we show that, in turbulent Rayleigh–Bénard convection, the friction coefficients associated with the applied shear and the shear generated by the large-scale convection rolls are both well described by Prandtl's (Ergeb. Aerodyn. Vers. Gött., vol. 4, 1932, pp. 18–29) logarithmic friction law, suggesting some kind of universality between purely shear-driven flows and thermal convection. These scaling relations hold well for $10^6 \leq Ra \leq 10^8$ , $0.5 \leq Pr \leq 5.0$ , and $0 \leq Re_S \leq 10^4$ .- 28 November 2024
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1000, A74
Open AccessScaling relations for heat and momentum transport in sheared Rayleigh–Bénard convection
We provide scaling relations for the Nusselt number $Nu$ and the friction coefficient $C_{S}$ in sheared Rayleigh–Bénard convection, i.e. in Rayleigh–Bénard flow with Couette- or Poiseuille-type shear forcing, by extending the Grossmann & Lohse (J. Fluid Mech., vol. 407, 2000, pp. 27–56, Phys. Rev. Lett., vol. 86, 2001, pp. 3316–3319, Phys. Rev. E, vol. 66, 2002, 016305, Phys. Fluids, vol. 16, 2004, pp. 4462–4472) theory to sheared thermal convection. The control parameters for these systems are the Rayleigh number $Ra$ , the Prandtl number $Pr$ and the Reynolds number $Re_S$ that characterises the strength of the imposed shear. By direct numerical simulations and theoretical considerations, we show that, in turbulent Rayleigh–Bénard convection, the friction coefficients associated with the applied shear and the shear generated by the large-scale convection rolls are both well described by Prandtl's (Ergeb. Aerodyn. Vers. Gött., vol. 4, 1932, pp. 18–29) logarithmic friction law, suggesting some kind of universality between purely shear-driven flows and thermal convection. These scaling relations hold well for $10^6 \leq Ra \leq 10^8$ , $0.5 \leq Pr \leq 5.0$ , and $0 \leq Re_S \leq 10^4$ . - Open Access
- 31 October 2024
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 998, A48
Turbulent mixed convection in vertical and horizontal channels
Turbulent shear flows driven by a combination of a pressure gradient and buoyancy forcing are investigated using direct numerical simulations. Specifically, we consider the set-up of a differentially heated vertical channel subject to a Poiseuille-like horizontal pressure gradient. We explore the response of the system to its three control parameters: the Grashof number $Gr$ , the Prandtl number $Pr$ , and the Reynolds number $Re$ of the pressure-driven flow. From these input parameters, the relative strength of buoyancy driving to the pressure gradient can be quantified by the Richardson number $Ri=Gr/Re^2$ . We compare the response of the mixed vertical convection configuration to that of mixed Rayleigh–Bénard convection, and find a nearly identical behaviour, including an increase in wall friction at higher $Gr$ , and a drop in the heat flux relative to natural convection for $Ri=O(1)$ . This closely matched response is despite vastly different flow structures in the systems. No large-scale organisation is visible in visualisations of mixed vertical convection – an observation that is confirmed quantitatively by spectral analysis. This analysis, combined with a statistical description of the wall heat flux, highlights how moderate shear suppresses the growth of small-scale plumes and reduces the likelihood of extreme events in the local wall heat flux. Vice versa, starting from a pure shear flow, the addition of thermal driving enhances the drag due to the emission of thermal plumes.- 31 October 2024
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 998, A48
Open AccessTurbulent mixed convection in vertical and horizontal channels
Turbulent shear flows driven by a combination of a pressure gradient and buoyancy forcing are investigated using direct numerical simulations. Specifically, we consider the set-up of a differentially heated vertical channel subject to a Poiseuille-like horizontal pressure gradient. We explore the response of the system to its three control parameters: the Grashof number $Gr$ , the Prandtl number $Pr$ , and the Reynolds number $Re$ of the pressure-driven flow. From these input parameters, the relative strength of buoyancy driving to the pressure gradient can be quantified by the Richardson number $Ri=Gr/Re^2$ . We compare the response of the mixed vertical convection configuration to that of mixed Rayleigh–Bénard convection, and find a nearly identical behaviour, including an increase in wall friction at higher $Gr$ , and a drop in the heat flux relative to natural convection for $Ri=O(1)$ . This closely matched response is despite vastly different flow structures in the systems. No large-scale organisation is visible in visualisations of mixed vertical convection – an observation that is confirmed quantitatively by spectral analysis. This analysis, combined with a statistical description of the wall heat flux, highlights how moderate shear suppresses the growth of small-scale plumes and reduces the likelihood of extreme events in the local wall heat flux. Vice versa, starting from a pure shear flow, the addition of thermal driving enhances the drag due to the emission of thermal plumes. - 28 August 2023
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 8 (8) , 083501
Optimal heat transport in rotating Rayleigh-Bénard convection at large Rayleigh numbers
The heat transport in rotating Rayleigh-Bénard convection (RBC) can be significantly enhanced for moderate rotation, i.e., for an intermediate range of Rossby numbers , compared to the nonrotating case. At Rayleigh numbers , the largest enhancement is achieved when the thicknesses of kinetic and thermal boundary layer are equal. However, experimental and numerical observations show that, at larger (), the maximal heat transport starts to deviate from the expected optimal boundary layer ratio and its enhancement amplitude decreases drastically. We present data from direct numerical simulations of rotating RBC in a periodic domain in the range of and for Prandtl number and 6.4 (corresponding to Ekman numbers ) to identify the reason for the transition to this large- regime of heat transport enhancement. Our analysis reveals that the transition occurs once the bulk flow at the optimal boundary layer ratio changes to geostrophic turbulence for large . In that flow state, the vertically coherent vortices, which support heat transport enhancement by Ekman pumping at smaller , dissolve into vertically decorrelated structures in the bulk such that the enhancing effect of Ekman pumping and the influence of the boundary layer ratio become small. Additionally, more heat leaks out of the Ekman vortices as the fraction of thermal dissipation in the bulk increases. We find that the rotation-induced shearing at the plates helps to increase the thermal dissipation in the bulk and thus acts as a limiting factor for the heat transport enhancement at large : Beyond a certain ratio of wall shear stress to vortex strength, the heat transport decreases irrespectively of the boundary layer ratio. This -dependent threshold, which roughly corresponds to a bulk accounting for of the total thermal dissipation, indicates the maximal heat transport enhancement and the optimal rotation rate at large .- 28 August 2023
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 8 (8) , 083501
Optimal heat transport in rotating Rayleigh-Bénard convection at large Rayleigh numbers
The heat transport in rotating Rayleigh-Bénard convection (RBC) can be significantly enhanced for moderate rotation, i.e., for an intermediate range of Rossby numbers , compared to the nonrotating case. At Rayleigh numbers , the largest enhancement is achieved when the thicknesses of kinetic and thermal boundary layer are equal. However, experimental and numerical observations show that, at larger (), the maximal heat transport starts to deviate from the expected optimal boundary layer ratio and its enhancement amplitude decreases drastically. We present data from direct numerical simulations of rotating RBC in a periodic domain in the range of and for Prandtl number and 6.4 (corresponding to Ekman numbers ) to identify the reason for the transition to this large- regime of heat transport enhancement. Our analysis reveals that the transition occurs once the bulk flow at the optimal boundary layer ratio changes to geostrophic turbulence for large . In that flow state, the vertically coherent vortices, which support heat transport enhancement by Ekman pumping at smaller , dissolve into vertically decorrelated structures in the bulk such that the enhancing effect of Ekman pumping and the influence of the boundary layer ratio become small. Additionally, more heat leaks out of the Ekman vortices as the fraction of thermal dissipation in the bulk increases. We find that the rotation-induced shearing at the plates helps to increase the thermal dissipation in the bulk and thus acts as a limiting factor for the heat transport enhancement at large : Beyond a certain ratio of wall shear stress to vortex strength, the heat transport decreases irrespectively of the boundary layer ratio. This -dependent threshold, which roughly corresponds to a bulk accounting for of the total thermal dissipation, indicates the maximal heat transport enhancement and the optimal rotation rate at large .- Open Access
- 22 June 2022
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 944, A1
How small-scale flow structures affect the heat transport in sheared thermal convection
We investigate the counter-intuitive initial decrease and subsequent increase in the Nusselt number $Nu$ with increasing wall Reynolds number $Re_w$ in the sheared Rayleigh–Bénard (RB) system by studying the energy spectra of convective flux and turbulent kinetic energy for Rayleigh number $Ra = 10^{7}$ , Prandtl number $Pr=1.0$ and inverse Richardson numbers $0 \leq 1/Ri \leq 10$ . These energy spectra show two distinct high-energy regions corresponding to the large-scale superstructures in the bulk and small-scale structures in the boundary layer (BL) regions. A greater separation between these scales at the thermal BL height correlates to a higher $Nu$ and indicates that the BLs are more turbulent. The minimum $Nu$ , which occurs at $1/Ri=1.0$ , is accompanied by the smallest separation between the large- and small-scale structures at the thermal BL height. At $1/Ri=1.0$ , we also observe the lowest value of turbulent kinetic energy normalized with the square of friction velocity within the thermal BL. Additionally, we find that the domain size has a limited effect on the heat and momentum transfer in the sheared RB system as long as the domain can accommodate the small-scale convective structures at the thermal BL height, signifying that capturing the large-scale superstructures is not essential to obtain converged values of $Nu$ and shear Reynolds number $Re_{\tau }$ . When the domain is smaller than these small-scale convective structures, the overall heat and momentum transfer reduces drastically.- 22 June 2022
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 944, A1
Open AccessHow small-scale flow structures affect the heat transport in sheared thermal convection
We investigate the counter-intuitive initial decrease and subsequent increase in the Nusselt number $Nu$ with increasing wall Reynolds number $Re_w$ in the sheared Rayleigh–Bénard (RB) system by studying the energy spectra of convective flux and turbulent kinetic energy for Rayleigh number $Ra = 10^{7}$ , Prandtl number $Pr=1.0$ and inverse Richardson numbers $0 \leq 1/Ri \leq 10$ . These energy spectra show two distinct high-energy regions corresponding to the large-scale superstructures in the bulk and small-scale structures in the boundary layer (BL) regions. A greater separation between these scales at the thermal BL height correlates to a higher $Nu$ and indicates that the BLs are more turbulent. The minimum $Nu$ , which occurs at $1/Ri=1.0$ , is accompanied by the smallest separation between the large- and small-scale structures at the thermal BL height. At $1/Ri=1.0$ , we also observe the lowest value of turbulent kinetic energy normalized with the square of friction velocity within the thermal BL. Additionally, we find that the domain size has a limited effect on the heat and momentum transfer in the sheared RB system as long as the domain can accommodate the small-scale convective structures at the thermal BL height, signifying that capturing the large-scale superstructures is not essential to obtain converged values of $Nu$ and shear Reynolds number $Re_{\tau }$ . When the domain is smaller than these small-scale convective structures, the overall heat and momentum transfer reduces drastically. - Open Access
- 9 June 2022
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 943, A17
Passive scalar transport in Couette flow
A scaling theory for the passive scalar transport in Couette flow, i.e. the flow between two parallel plates moving with different velocities, is proposed. This flow is determined by the bulk Reynolds number $Re_b$ and the Prandtl number $Pr$ . In the turbulent regime, for moderate shear Reynolds number $Re_{\tau }$ and moderate $Pr$ , we derive that the passive scalar transport characterised by the Nusselt number $Nu$ scales as $Nu \sim Pr^{1/2}Re_{\tau }^{2}Re_b^{-1}$ . We then use the well-established scaling for the friction coefficient $C_f \sim Re_b^{-1/4}$ (corresponding to a shear Reynolds number $Re_{\tau } \sim Re_b^{7/8}$ ) which holds reasonably well within the range $3\times 10^{3} \leqslant Re_b \leqslant 10^{5}$ , to obtain $Nu \sim Pr^{1/2}Re_b^{3/4}$ for the Nusselt number scaling. The theoretical results are tested against direct numerical simulations of Couette flows for the parameter ranges $81 \leqslant Re_b \leqslant 22361$ and $0.1 \leqslant Pr \leqslant 10$ , finding good agreement. Analyses of the numerically obtained turbulent flow fields confirm logarithmic mean wall-parallel profiles of the velocity and the passive scalar in the inertial sublayer.- 9 June 2022
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 943, A17
Open AccessPassive scalar transport in Couette flow
A scaling theory for the passive scalar transport in Couette flow, i.e. the flow between two parallel plates moving with different velocities, is proposed. This flow is determined by the bulk Reynolds number $Re_b$ and the Prandtl number $Pr$ . In the turbulent regime, for moderate shear Reynolds number $Re_{\tau }$ and moderate $Pr$ , we derive that the passive scalar transport characterised by the Nusselt number $Nu$ scales as $Nu \sim Pr^{1/2}Re_{\tau }^{2}Re_b^{-1}$ . We then use the well-established scaling for the friction coefficient $C_f \sim Re_b^{-1/4}$ (corresponding to a shear Reynolds number $Re_{\tau } \sim Re_b^{7/8}$ ) which holds reasonably well within the range $3\times 10^{3} \leqslant Re_b \leqslant 10^{5}$ , to obtain $Nu \sim Pr^{1/2}Re_b^{3/4}$ for the Nusselt number scaling. The theoretical results are tested against direct numerical simulations of Couette flows for the parameter ranges $81 \leqslant Re_b \leqslant 22361$ and $0.1 \leqslant Pr \leqslant 10$ , finding good agreement. Analyses of the numerically obtained turbulent flow fields confirm logarithmic mean wall-parallel profiles of the velocity and the passive scalar in the inertial sublayer.