LRLeonid Razarenov

Leonid Razarenov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Leonid Razarenov has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    RESULTS OF STUDYING THE OPERATIONAL PROCESSES OF SMALL-SIZED SKID-STEER LOADERS WITH AN ON-BOARD STEERING SYSTEM

    by Leonid Razarenov, Volodymyr Hurko

    The paper reviews the operation of skid-steer loaders and presents the methodology and results of studying dynamic processes and calculating the indicators of loading, oscillations, and stability of skid-steer loaders. The modeling of dynamic processes has proved the possibility of estimating external loads on buckets using a simplified relationship. Express methods for assessing machine load indicators, their stability, and the thermal regime of hydraulic drives are proposed. The analysis of field tests and calculated data established that the most severe loading mode of the working implement and traction drive of the loader occurs during normal bucket penetration into a pile of bulk material at a constant working volume of traction pumps. Self-excitation of the loader’s oscillations is possible during the final phase of its stopping in a bulk material pile, when the bucket bottom is tilted forward at an angle and the wheels are brought to full slip mode. The stability of the loader during the working cycle was analyzed. The load and temperature regimes of the hydraulic traction drive of skid-steer loaders are determined. Methods for predicting the main parameters and load of skid-steer loaders, proposals for improving the heat exchange system of the hydraulic drive, and methods of controlling the traction drive are presented. Measures to stabilize the hydraulic drive temperature to ensure uninterrupted operation of skid-steer loaders are proposed. The possibility of using the obtained dependencies in developing a computer model of a loader and introducing intelligent systems for automatic control of the bucket filling process using machine learning methods is substantiated.

  • Open Access

    Development of the method of multi-criteria evaluation of hierarchical systems

    by Oleg Sova, Oleksandr Stanovskyi, Taras Hurskyi, Valentyn Olshanskyi, Oleksandr Volkov, Serhii Shostak, Vitalii Bezuhlyi, Hryhorii Tikhonov, Olena Chaikovska, Leonid Razarionov

    Multicriteria evaluation offers undeniable advantages over single-criterion assessment methods. The object of the study is hierarchical systems. The subject of the study is the process of multicriteria evaluation of the state of hierarchical systems. A method for multicriteria evaluation of hierarchical systems is proposed. The originality of the method lies in the application of additional advanced procedures that allow for the following: – verification of input data and refinement of inter-element connections within the hierarchical system using an enhanced penguin swarm algorithm. This minimizes the risk of errors resulting from incorrect data input in the assessment of the operational military (force) grouping; – description of external and internal factors affecting the hierarchical system subject to multicriteria evaluation through the use of fuzzy cognitive models; – adaptation to the type of hierarchical system via multilevel adjustment of the system of indicators and evaluation criteria; – reduction of uncertainty through the use of interval-valued Pythagorean fuzzy sets, thereby improving the reliability of multicriteria assessment of hierarchical system states; – identification of the most vulnerable elements within the hierarchical system using a fault tree analysis; – adaptation of the membership function type depending on the system’s available computational resources, which ensures compatibility with existing computational capacities. An example of the method’s application is demonstrated through the multicriteria evaluation of an operational military (force) grouping. The proposed method provides an average improvement of 35% in accuracy and efficiency, while ensuring a high convergence rate of results at the level of 93.17%

  • Open Access

    PECULIARITIES OF OPERATION OF A SHORT-BASE COMPACT LOADER WITH LATERAL ROTATION WHEN PERFORMING A U-TURN

    by Leonid Razarenov, Volodymyr Hurko

    The article reviews the features of the operation of small-sized bucket loaders. An analysis of publications has shown that there are currently no recommendations for assessing the dynamic stability of a small-sized bucket loader with an on-board steering system when making a turn. Existing methods consider only static stability, which does not sufficiently describe the process of machine stability during turning. The operation of such machines on construction sites shows that they can lose stability when making a turn. Existing methods consider only static stability, which does not sufficiently describe the process of machine stability during turning. The purpose of this article is to study and develop a methodology for calculating the indicators of the oscillatory process and dynamic stability of a short-base loader with an on-board steering system and to determine the critical overturning angle and the period of the main oscillation form. Along with the assessment of stability in the design positions for conventional wheeled loaders, the stability of the machines under consideration is analysed when one of the sides is suddenly braked. Considering the dynamic stability of the loader when it is turning relative to one fixed side, we believe that the centrifugal force suddenly applied to the centre of mass of the loader initially excites oscillations of the machine on elastic running wheels, and then the oscillation process can intensify due to wheel sliding in the area of contact with the bearing surface. The criterion for loss of stability is the possible detachment of at least one wheel from the road surface. The dynamic stability of the forklift is assessed by the angle of forward deviation of the centre of mass of the forklift with the largest load relative to the static balance position. The position of the unstable equilibrium of the forklift corresponds to the position of the centre of mass on the vertical axis passing through the axis of the front wheels. The dependences of the period of the main form of oscillations for determining the stability of bucket wheel loaders with an on-board steering system have been established.


  • Open Access

    ANALYSIS OF DYNAMICS OF VOLUME HYDRAULIC POWER STEERING SELF-PROPELLED TRACTOR CHASSIS

    by Grygoriy Avrunin, Михайло Абович Подригало, Оlexander Zakapko, Irina Moroz, Leonid Razarenov, Anton Kholodov, Mykhailo Kholodov, Григорій Аврамович Аврунін, Ірина Іванівна Мороз, Леонід Володимирович Разарьонов, et al.

    Goal. Analysis of the dynamics of the hydraulic fluid power steering drive of the wheeled tractor self-propelled chassis СШ2540 by simulating the operation of a hydraulic cylinder with a one-sided rod for moving the steering trapezoid when turning the wheels and studying the change in the pressure of the working fluid and the movement of the hydraulic cylinder rod under different load modes. Research methodology. The method of simulation modeling is used, when the variables describing the behavior of the steering hydraulic cylinder are determined by certain load algorithms and operating fluid flows, and are described by differential equations. The differential equations that determine the pressure of the working fluid in the cavities of the hydraulic cylinder and the movement of its rod when the working fluid is fed into the piston or rod cavity are based on the laws of mechanics, the principle of the continuity of the flow of the working fluid and its compressibility. The VisSim package of application programs was used for modeling according to the proposed methodology. The changes of the parameters in the hydraulic cylinder of turning the wheels when they are shifted from the task of the control action in the form of an increase in the external load and the flow of the working fluid in the output channels of the metering pump overcome by the hydraulic cylinder were studied. The influence of the modulus of elasticity of the working fluid, which decreases when it is saturated with undissolved air, was also investigated. The results. When starting the hydraulic steering drive, i.e. when turning the steering wheel from its neutral position, depending on the external load and the intensity of the driver's work at the wheel, oscillatory processes take place in the hydraulic cylinder cavities, which can significantly exceed the working pressure. The results of the research give a reason to conclude that it is necessary to study the nature of the increase in the flow rate and pressure of the working fluid on a full-scale sample of the tractor chassis metering pump, i.e. by replacing the flow rate simulation with its actual value. Setting the loading time and flow rate of the working fluid using the map-VisSim unit is more convenient than setting it with analytical expressions, as it makes it possible to simulate different acceleration rates of the hydraulic cylinder and, if necessary, to control the stationary mode of the steering wheel in the neutral position.

  • Open Access

    ASSESSMENT OF THE STABILITY OF THE FRONT PIVOT AXLE DURING STEADY-STATE MOTION OF A TRACTOR SELF-PROPELLED CHASSIS

    by Mikhail Podrigalo, Leonid Razarenov, Oleksandr Zakapko, Леонід Разарьонов

    In known scientific and technical literature, insufficient attention is paid to the study of dynamic processes of wheeled vehicles with a steering front axle. The use of front swivel axle on a self-propelled chassis makes it possible to minimize the moment of resistance to turning and reduce the wear of front wheel tires in comparison with rotary guide wheels. This modernization can provide a wider range of attachments for mechanized work equipment. The aim of this work is to increase the stability of the rectilinear steady-state motion of a self-propelled tractor chassis by creating stabilizing moments on the front pivot axle by shifting the axis of rotation of the front axle in the direction of the longitudinal axis of the machine. The stability of the rectilinear steady-state motion of a self-propelled tractor chassis is investigated when creating stabilizing moments on the front steering axle by shifting the vertical axis of rotation of the front axle in the direction of the longitudinal axis of the machine. This scientific article shows that when the steering axle moves, it is possible to reduce the lateral force on the front axle to zero, which makes it possible to reduce the moment of resistance to turning. A straight-line steady-state movement of a tractor is considered, where a violation of the stability of the front steering axle may occur during a short-term impact on an obstacle on the road. In some cases, the angular acceleration and angular velocity of the bridge in the road plane may be the exciting factor. The loading scheme of a front swing bridge under the action of an exciting angular acceleration is determined. The calculation of the effect of the exciting factors on the power steering cylinder is presented. The stabilizing moment that occurs when the axis of the vertical shaft of the front steering axle drive is displaced is determined. The differential equation of the front axle's circular motion was analyzed, which revealed its stability under the action of short-term excitatory forces in the rectilinear steady-state motion of the self-propelled chassis. An estimation of the motion of the front steering axle of a self-propelled chassis is presented, with the determined proportionality coefficients and coefficients of the differential equation, which describes the stable motion of the front steering axle in the steady-state rectilinear motion of the machine under the action of short-term disturbing forces. Keywords: self-propelled chassis, front swivel axle, stability, stabilizing moment, steady-state motion


  • Оцінка граничного навантажувального режиму рульового керування тракторного самохідного шасі

    by М. А. Подригало, Л. В. Разарьонов, О. Г. Закапко

    В статті досліджується найбільш напружений режим навантаження рульового керування тракторного самохідного шасі при максимальній частоті впливів водія на руль. Метою статті є оцінка граничного навантажувального режиму рульового керування тракторного самохідного шасі з переднім поворотним мостом. Представлені результати визначення параметрів граничного (найбільш напруженого) режиму навантаження рульового керування перспективного тракторного самохідного шасі з переднім поворотним мостом. Отримана математична модель дозволяє оцінити динаміку зміни тиску рідини в силовому циліндрі при граничному режимі навантаження рульового керування.