Mina Dadvand
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mina Dadvand has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
O. Savadogo
Chemical Engineering, Polytechnique Montréal, Montreal, QC, Canada
2 shared publications- Oumarou Savadogo
Laboratory of New Materials for Energy and Electrochemistry, Polytechnique-Montréal, Montréal, QC H3T 1J4, Canada
2 shared publications - Oumarou Savadogo
Laboratory of New Materials for Energy and Electrochemistry, Polytechnique-Montréal, Montréal, QC H3T 1J4, Canada
1 shared publication
Latest Publications
- 13 March 2023
- Published by Taylor & Francis in Canadian Metallurgical Quarterly
- Vol. 63 (1) , 105-118
Highly corrosion and wear-resistant NiW–SiC–CeO 2 composite coating
Crack-free and uniform NiW composite coatings filled with ceramic particles such as SiC and CeO2 were deposited on brass substrates by applying direct current (DC) and a well-designed pulse reverse current waveforms (PRC). PRC coatings displayed the noblest corrosion potential and lowest current density compared to DC electrodeposited coatings. Among all PRC coatings, PRC–NiW–SiC–CeO2 demonstrated the highest corrosion resistance and the lowest current density. It also seems that the addition of ceramic particles to the NiW matrix enhanced the wear resistance of the coatings and the lowest wear volume of about (14.119 × 103 µm3) and the friction coefficient of 0.25 was obtained due to the formation of the uniform, void-free and packed structures with high content of SiC and CeO2 particles in the deposit.
- 13 March 2023
- Published by Taylor & Francis in Canadian Metallurgical Quarterly
- Vol. 63 (1) , 105-118
Highly corrosion and wear-resistant NiW–SiC–CeO 2 composite coating
Crack-free and uniform NiW composite coatings filled with ceramic particles such as SiC and CeO2 were deposited on brass substrates by applying direct current (DC) and a well-designed pulse reverse current waveforms (PRC). PRC coatings displayed the noblest corrosion potential and lowest current density compared to DC electrodeposited coatings. Among all PRC coatings, PRC–NiW–SiC–CeO2 demonstrated the highest corrosion resistance and the lowest current density. It also seems that the addition of ceramic particles to the NiW matrix enhanced the wear resistance of the coatings and the lowest wear volume of about (14.119 × 103 µm3) and the friction coefficient of 0.25 was obtained due to the formation of the uniform, void-free and packed structures with high content of SiC and CeO2 particles in the deposit.
- Open Access
Effect of hBN on Corrosion and Wear Performances of DC Electrodeposited NiW and NiW–SiC on Brass Substrates
Crack-free and uniform nickel–tungsten (NiW) coatings and their composite coatings filled with ceramic particles such as silicon carbide (SiC) and hexagonal-boron nitride (hBN) were deposited on brass substrates by applying direct current (DC) waveforms. Among all coatings, NiW–SiC–hBN coatings displayed the noblest corrosion potential (−0.49 V) and lowest current density (4.36 × 10−6 A·cm−2). It also seems that addition of hBN and SiC ceramic particles to NiW matrix remarkably improved the wear performance of the NiW coatings. However, NiW–hBN exhibited the lowest wear volume (48.84 × 103 µm3) and the friction coefficient of 0.1 due to ultra–low friction coefficient of hBN particles.
Open AccessEffect of hBN on Corrosion and Wear Performances of DC Electrodeposited NiW and NiW–SiC on Brass Substrates
Crack-free and uniform nickel–tungsten (NiW) coatings and their composite coatings filled with ceramic particles such as silicon carbide (SiC) and hexagonal-boron nitride (hBN) were deposited on brass substrates by applying direct current (DC) waveforms. Among all coatings, NiW–SiC–hBN coatings displayed the noblest corrosion potential (−0.49 V) and lowest current density (4.36 × 10−6 A·cm−2). It also seems that addition of hBN and SiC ceramic particles to NiW matrix remarkably improved the wear performance of the NiW coatings. However, NiW–hBN exhibited the lowest wear volume (48.84 × 103 µm3) and the friction coefficient of 0.1 due to ultra–low friction coefficient of hBN particles.
- 23 June 2022
- Published by SAGE Publications in Tribology - Materials, Surfaces & Interfaces
- Vol. 16 (4) , 281-291
Effect of pulse reverse current waveform on tribological and mechanical properties of electrodeposited nickel–tungsten alloys on brass substrate
The precise control of tungsten content of electrodeposited nickel–tungsten (NiW) on brass substrate was achieved by applying a well-designed pulse reverse current waveform. A crack-free, uniform and, mirror-like finish surface was obtained by using a novel derivative of propargyl compound, propargyl-oxo-propane-2,3-dihydroxy, as a brightener and grain refiner into the electrodeposition bath. This study indicates that the electrodeposited nickel–tungsten alloys with an optimum tungsten content (32 wt%) possesses outstanding mechanical and, wear performance, also with very low friction of coefficient of 0.2. GRAPHICAL ABSTRACT
- 23 June 2022
- Published by SAGE Publications in Tribology - Materials, Surfaces & Interfaces
- Vol. 16 (4) , 281-291
Effect of pulse reverse current waveform on tribological and mechanical properties of electrodeposited nickel–tungsten alloys on brass substrate
The precise control of tungsten content of electrodeposited nickel–tungsten (NiW) on brass substrate was achieved by applying a well-designed pulse reverse current waveform. A crack-free, uniform and, mirror-like finish surface was obtained by using a novel derivative of propargyl compound, propargyl-oxo-propane-2,3-dihydroxy, as a brightener and grain refiner into the electrodeposition bath. This study indicates that the electrodeposited nickel–tungsten alloys with an optimum tungsten content (32 wt%) possesses outstanding mechanical and, wear performance, also with very low friction of coefficient of 0.2. GRAPHICAL ABSTRACT
- Open Access
Synthesis and Characterization of Novel NiW–CeO2 Composite Coating with Enhanced Corrosion and Wear Resistance
Compact and uniform NiW composite coatings filled with ceramic particles such as CeO2 were electrodeposited on brass substrates using direct current (DC) and a well–designed pulse reverse current waveforms (PRC). PRC coatings exhibited the noblest corrosion potential and lowest current density compared to DC–electrodeposited coatings. Among all PRC coatings, PRC–NiW–CeO2 demonstrated the highest corrosion potential (−4.72 × 10−1 V) and the lowest current density (5.32 × 10−6 V). It also seems that the addition of CeO2 particles to the NiW matrix enhanced the wear resistance of the coatings, and the lowest wear volume of (133.10 × 103 µm3) and friction coefficient of 0.25 were obtained due to the formation of the uniform, void free and compact structures with a high content of CeO2 particles in the coating.
Open AccessSynthesis and Characterization of Novel NiW–CeO2 Composite Coating with Enhanced Corrosion and Wear Resistance
Compact and uniform NiW composite coatings filled with ceramic particles such as CeO2 were electrodeposited on brass substrates using direct current (DC) and a well–designed pulse reverse current waveforms (PRC). PRC coatings exhibited the noblest corrosion potential and lowest current density compared to DC–electrodeposited coatings. Among all PRC coatings, PRC–NiW–CeO2 demonstrated the highest corrosion potential (−4.72 × 10−1 V) and the lowest current density (5.32 × 10−6 V). It also seems that the addition of CeO2 particles to the NiW matrix enhanced the wear resistance of the coatings, and the lowest wear volume of (133.10 × 103 µm3) and friction coefficient of 0.25 were obtained due to the formation of the uniform, void free and compact structures with a high content of CeO2 particles in the coating.