Feng Zhao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Feng Zhao has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Lei Wang
School of Intelligent Construction, Wuchang University of Technology, Wuhan 430002, China
3 shared publications - Shengwen Tang
Wuhan University
3 shared publications - Tingting Huo
School of Intelligent Construction, Wuchang University of Technology, Wuhan 430002, China
2 shared publications - Yajun Huang
School of Intelligent Construction, Wuchang University of Technology, Wuhan 430002, China
2 shared publications - Bo Liu
School of Intelligent Construction, Wuchang University of Technology, Wuhan 430002, China
1 shared publication - Chin Siong Ho
Universiti Teknologi Malaysia
1 shared publication
Latest Publications
- Open Access
- 16 June 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (12) , 6208
Spatiotemporal Dynamics and Mediated–Moderated Effects of the Digital Economy on Agricultural Carbon Emissions in the Yangtze River Economic Belt
Agricultural carbon reduction is increasingly important for advancing low-carbon and sustainable agricultural development. Using provincial panel data for the Yangtze River Economic Belt (YEB) from 2007 to 2022, this study examines the spatiotemporal evolution of the digital economy (DE) and agricultural carbon emissions (ACE), and applies a two-way fixed-effects model with mediation and moderation analyses. The results show that digital economy (DE) increased steadily across the YEB, while agricultural carbon emissions (ACE) showed clear spatiotemporal variation. Digital economy (DE) is significantly negatively associated with agricultural carbon emissions (ACE), indicating that digital development can support agricultural carbon reduction. The Bootstrap results show that technological innovation and industrial agglomeration are statistically supported mediating pathways. Technological innovation is the primary mechanism, accounting for 44.02% of the total effect, while industrial agglomeration has a smaller but significant mediation share of 0.25%. Industrial structure optimization and fiscal investment are not confirmed as robust indirect pathways. The moderation results show that environmental regulation weakens the negative DE–ACE relationship, whereas agricultural fiscal expenditure strengthens it. These findings highlight the importance of green innovation, agglomeration effects, and supportive fiscal conditions in digital agricultural carbon reduction.
- 16 June 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (12) , 6208
Open AccessSpatiotemporal Dynamics and Mediated–Moderated Effects of the Digital Economy on Agricultural Carbon Emissions in the Yangtze River Economic Belt
Agricultural carbon reduction is increasingly important for advancing low-carbon and sustainable agricultural development. Using provincial panel data for the Yangtze River Economic Belt (YEB) from 2007 to 2022, this study examines the spatiotemporal evolution of the digital economy (DE) and agricultural carbon emissions (ACE), and applies a two-way fixed-effects model with mediation and moderation analyses. The results show that digital economy (DE) increased steadily across the YEB, while agricultural carbon emissions (ACE) showed clear spatiotemporal variation. Digital economy (DE) is significantly negatively associated with agricultural carbon emissions (ACE), indicating that digital development can support agricultural carbon reduction. The Bootstrap results show that technological innovation and industrial agglomeration are statistically supported mediating pathways. Technological innovation is the primary mechanism, accounting for 44.02% of the total effect, while industrial agglomeration has a smaller but significant mediation share of 0.25%. Industrial structure optimization and fiscal investment are not confirmed as robust indirect pathways. The moderation results show that environmental regulation weakens the negative DE–ACE relationship, whereas agricultural fiscal expenditure strengthens it. These findings highlight the importance of green innovation, agglomeration effects, and supportive fiscal conditions in digital agricultural carbon reduction.
- Open Access
- 15 October 2022
- Published by MDPI AG in Fractal and Fractional
- Vol. 6 (10) , 598
Comparison between the Influence of Finely Ground Phosphorous Slag and Fly Ash on Frost Resistance, Pore Structures and Fractal Features of Hydraulic Concrete
Hydraulic concrete in cold regions is necessary for good frost resistance. The utilization of finely ground PS (FGPS) in the construction of hydropower projects could solve the pollution issue and the fly ash shortage problem. In this work, the influence of FGPS and fly ash on frost resistance, pore structure and fractal features of hydraulic concretes was investigated and compared. The main results are: (1) The inclusion of 15–45% FGPS reduced the compressive strength of plain cement concretes by about 21–52%, 7–23% and 0.4–8.2% at 3, 28 and 180 days, respectively. (2) The inclusion of FGPS less than 30% contributed to the enhancement of 180-day frost resistance. At the same dosage level, the FGPS concrete presented larger compressive strengths and better frost resistance than fly ash concrete at 28 and 180 days. (3) At 3 days, both the addition of FGPS and fly ash coarsened the pore structures. FGPS has a much stronger pore refinement effect than fly ash at 28 and 180 days. The correlation between frost resistance of hydraulic concrete and pore structure is weak. (4) At 28 days, the incorporation of FGPS and fly ash weakened the air void structure of hydraulic concrete. At 180 days, the presence of FGPS and fly ash was beneficial for refining the air void structure. The optimal dosage for FGPS and fly ash in terms of 180-day air void refinement was 30% and 15%, respectively. The frost resistance of hydraulic concretes is closely correlated with the air void structure. (5) The pore surface fractal dimension (Ds) could characterize and evaluate the pore structure of hydraulic concretes, but it was poorly correlated with the frost resistance.
- 15 October 2022
- Published by MDPI AG in Fractal and Fractional
- Vol. 6 (10) , 598
Open AccessComparison between the Influence of Finely Ground Phosphorous Slag and Fly Ash on Frost Resistance, Pore Structures and Fractal Features of Hydraulic Concrete
Hydraulic concrete in cold regions is necessary for good frost resistance. The utilization of finely ground PS (FGPS) in the construction of hydropower projects could solve the pollution issue and the fly ash shortage problem. In this work, the influence of FGPS and fly ash on frost resistance, pore structure and fractal features of hydraulic concretes was investigated and compared. The main results are: (1) The inclusion of 15–45% FGPS reduced the compressive strength of plain cement concretes by about 21–52%, 7–23% and 0.4–8.2% at 3, 28 and 180 days, respectively. (2) The inclusion of FGPS less than 30% contributed to the enhancement of 180-day frost resistance. At the same dosage level, the FGPS concrete presented larger compressive strengths and better frost resistance than fly ash concrete at 28 and 180 days. (3) At 3 days, both the addition of FGPS and fly ash coarsened the pore structures. FGPS has a much stronger pore refinement effect than fly ash at 28 and 180 days. The correlation between frost resistance of hydraulic concrete and pore structure is weak. (4) At 28 days, the incorporation of FGPS and fly ash weakened the air void structure of hydraulic concrete. At 180 days, the presence of FGPS and fly ash was beneficial for refining the air void structure. The optimal dosage for FGPS and fly ash in terms of 180-day air void refinement was 30% and 15%, respectively. The frost resistance of hydraulic concretes is closely correlated with the air void structure. (5) The pore surface fractal dimension (Ds) could characterize and evaluate the pore structure of hydraulic concretes, but it was poorly correlated with the frost resistance.
- Open Access
- 28 August 2022
- Published by MDPI AG in Fractal and Fractional
- Vol. 6 (9) , 476
The Influence of Fly Ash Dosages on the Permeability, Pore Structure and Fractal Features of Face Slab Concrete
Concrete-face slabs are the primary anti-permeability structures of the concrete-face rockfill dam (CFRD), and the resistance of face slab concrete to permeability is the key factor affecting the operation and safety of CFRDs. Herein, the influences of five fly ash dosages (namely 10%, 20%, 30%, 40% and 50%) on the permeability property of face slab concretes were investigated. Moreover, the difference in the permeability caused by the fly ash dosage variations is revealed in terms of the pore structure and fractal theory. The results illustrate that: (1) The inclusion of 10–50% fly ash lowered the compressive strength of face slab concretes before 28 days of hydration, whereas it contributed to the 180-day strength increment. (2) The incorporation of 10–50% fly ash raised the average water-seepage height (Dm) and the relative permeability coefficient (Kr) of the face slab concrete by about 14–81% and 30–226% at 28 days, respectively. At 180 days, the addition of fly ash improved the 180-day impermeability by less than 30%. (3) The permeability of face slab concretes is closely correlated with their pore structures and Ds. (4) The optimal fly ash dosage in terms of the long-term impermeability and pore refinement of face slab concretes is around 30%. Nevertheless, face slab concretes containing a high dosage of fly ash must be cured for a relatively long period before they can withstand high water pressure.
- 28 August 2022
- Published by MDPI AG in Fractal and Fractional
- Vol. 6 (9) , 476
Open AccessThe Influence of Fly Ash Dosages on the Permeability, Pore Structure and Fractal Features of Face Slab Concrete
Concrete-face slabs are the primary anti-permeability structures of the concrete-face rockfill dam (CFRD), and the resistance of face slab concrete to permeability is the key factor affecting the operation and safety of CFRDs. Herein, the influences of five fly ash dosages (namely 10%, 20%, 30%, 40% and 50%) on the permeability property of face slab concretes were investigated. Moreover, the difference in the permeability caused by the fly ash dosage variations is revealed in terms of the pore structure and fractal theory. The results illustrate that: (1) The inclusion of 10–50% fly ash lowered the compressive strength of face slab concretes before 28 days of hydration, whereas it contributed to the 180-day strength increment. (2) The incorporation of 10–50% fly ash raised the average water-seepage height (Dm) and the relative permeability coefficient (Kr) of the face slab concrete by about 14–81% and 30–226% at 28 days, respectively. At 180 days, the addition of fly ash improved the 180-day impermeability by less than 30%. (3) The permeability of face slab concretes is closely correlated with their pore structures and Ds. (4) The optimal fly ash dosage in terms of the long-term impermeability and pore refinement of face slab concretes is around 30%. Nevertheless, face slab concretes containing a high dosage of fly ash must be cured for a relatively long period before they can withstand high water pressure.
- Open Access
- 16 June 2022
- Published by MDPI AG in Fractal and Fractional
- Vol. 6 (6) , 335
Effects of Fly Ash Dosage on Shrinkage, Crack Resistance and Fractal Characteristics of Face Slab Concrete
The crack resistance of face slab concretes to various shrinkages is crucial for the structural integrity and the normal operation of concrete-faced rockfill dams (CFRDs). In this work, the effects of fly ash with four dosages (i.e., 10%, 20%, 30% and 40%) on the drying shrinkage, autogenous shrinkage and the cracking resistance of face slab concrete were studied. Besides, the difference in shrinkage behavior due to fly ash addition was revealed from the viewpoint of the pore structure and fractal dimension of the pore surface (Ds). The findings demonstrate that (1) the incorporation of 10–40% fly ash could slightly reduce the drying shrinkage by about 2.2–13.5% before 14 days of hydration, and it could reduce the drying shrinkage at 180 days by about 5.1–23.2%. By contrast, the fly ash addition could markedly reduce the autogenous shrinkage at early, middle and long-term ages. (2) Increasing fly ash dosage from 0 to 40% considerably improves the crack resistance of concrete to plastic shrinkage. Nevertheless, the increase in fly ash dosage increases the drying-induced cracking risk under restrained conditions. (3) The pore structures of face slab concrete at 3 and 28 days become coarser with the increase in fly ash dosage up to 40%. At 180 days, the pore structures become more refined as the fly ash dosage increases to 30%; however, this refinement effect is not as appreciable as the fly ash dosage increases from 30% to 40%. (4) The Ds of face slab concrete is closely related with the concrete pore structures. The Ds of face slab concrete at a. late age increases from 2.902 to 2.946 with increasing of the fly ash dosage. The pore structure and Ds are closely correlated with the shrinkage of face slab concrete. (5) The fly ash dosage around 30% is optimal for face slab concretes in terms of lowering shrinkage and refining the pore structures, without compromising much mechanical property. However, the face slab concretes with a large fly ash dosage should be well cured under restrained and evaporation conditions at an initial hydration age.
- 16 June 2022
- Published by MDPI AG in Fractal and Fractional
- Vol. 6 (6) , 335
Open AccessEffects of Fly Ash Dosage on Shrinkage, Crack Resistance and Fractal Characteristics of Face Slab Concrete
The crack resistance of face slab concretes to various shrinkages is crucial for the structural integrity and the normal operation of concrete-faced rockfill dams (CFRDs). In this work, the effects of fly ash with four dosages (i.e., 10%, 20%, 30% and 40%) on the drying shrinkage, autogenous shrinkage and the cracking resistance of face slab concrete were studied. Besides, the difference in shrinkage behavior due to fly ash addition was revealed from the viewpoint of the pore structure and fractal dimension of the pore surface (Ds). The findings demonstrate that (1) the incorporation of 10–40% fly ash could slightly reduce the drying shrinkage by about 2.2–13.5% before 14 days of hydration, and it could reduce the drying shrinkage at 180 days by about 5.1–23.2%. By contrast, the fly ash addition could markedly reduce the autogenous shrinkage at early, middle and long-term ages. (2) Increasing fly ash dosage from 0 to 40% considerably improves the crack resistance of concrete to plastic shrinkage. Nevertheless, the increase in fly ash dosage increases the drying-induced cracking risk under restrained conditions. (3) The pore structures of face slab concrete at 3 and 28 days become coarser with the increase in fly ash dosage up to 40%. At 180 days, the pore structures become more refined as the fly ash dosage increases to 30%; however, this refinement effect is not as appreciable as the fly ash dosage increases from 30% to 40%. (4) The Ds of face slab concrete is closely related with the concrete pore structures. The Ds of face slab concrete at a. late age increases from 2.902 to 2.946 with increasing of the fly ash dosage. The pore structure and Ds are closely correlated with the shrinkage of face slab concrete. (5) The fly ash dosage around 30% is optimal for face slab concretes in terms of lowering shrinkage and refining the pore structures, without compromising much mechanical property. However, the face slab concretes with a large fly ash dosage should be well cured under restrained and evaporation conditions at an initial hydration age.