XWXuanzhi Wang

Xuanzhi Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xuanzhi Wang has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • NearSense: Exploring NearLink for New-Generation Wireless Sensing

    by Zijun Han, Xuanzhi Wang, Yang Li, Dan Wu, Hongliu Yang, Wanru Ning, Zhiyun Yao, Wenwei Li, Xingqing Cheng, Zixiang Ma, et al.


  • Open Access

    FreeBFI: Enabling Fine-grained BFI Sensing with an Arbitrary Number of Antennas

    by Junzhe Wang, Wenwei Li, Jiarun Zhou, Jie Xiong, Xuanzhi Wang, Qiwei Wang, Zhiyun Yao, Xusheng Zhang, Duo Zhang, Daqing Zhang

    WiFi sensing has garnered significant attention from both academic and industrial communities, largely due to the widespread deployment of WiFi infrastructure. However, most existing WiFi sensing works rely on Channel State Information (CSI), which can only be extracted from very few commercial WiFi devices. The widespread adoption of new WiFi protocols, such as IEEE 802.11ac and 802.11ax, presents a valuable opportunity to leverage the widely available Beamforming Feedback Information (BFI) for WiFi sensing. Several studies have explored the potential of BFI-based WiFi sensing. However, these works are limited to a specific number of antennas and cannot achieve fine-grained BFI sensing across an arbitrary number of antennas. In this work, we design and implement FreeBFI, the first BFI-based WiFi sensing system that can work with an arbitrary number of antennas. FreeBFI fully exploits the channel information and the SNR information contained in BFI to establish the relationship between BFI and target motion across arbitrary antenna counts. Furthermore, to extract fine-grained motion information from the established relationship, FreeBFI smartly fuses the information from multiple antennas and proposes a novel optimization algorithm to enhance the motion signal. To showcase the sensing capability of FreeBFI, we select two representative WiFi sensing applications: respiration monitoring and gesture recognition. We conduct comprehensive experiments covering a wide range of antenna counts and test the performance of FreeBFI on various WiFi devices. Experimental results demonstrate that FreeBFI not only delivers accurate and robust sensing performance under arbitrary antenna counts but also enhances sensing accuracy as all antennas are utilized. For respiration monitoring, FreeBFI significantly extends the sensing range from 4 m to 8 m. For gesture recognition, FreeBFI improves complex gesture recognition accuracy by over 20%. We believe this work marks a significant step toward the broader adoption of WiFi sensing on next-generation WiFi devices.


  • WiCaliper: Simultaneous Material and 3D Size Sensing for Everyday Objects Using WiFi

    by Zhiyun Yao, Kai Niu, Xuanzhi Wang, Rong Zheng, Junzhe Wang, Duo Zhang, Daqing Zhang

    Alongside the ongoing standardization efforts for WiFi sensing, WiFi has emerged as a leading technology for Integrated Sensing and Communications (ISAC) with numerous sensing applications demonstrating its significant potentials. Material and size sensing, essential in quality control and digital twins, has drawn much interest. Yet, simultaneous material and 3D size sensing remains challenging, primarily due to the lack of suitable sensing models for objects at near-wavelength scales. This paper introduces WiCaliper, the first WiFi-based system addressing this problem. Its core innovation is DP-CSI, a novel sensing model that captures both diffraction and penetration effects to characterize the relationship between channel state information and the material, shape, and size of everyday 3D objects. To effectively solve for multiple object parameters, WiCaliper employs a two-step estimation process consisting of closed-form property function recovery and multi-view joint parameter optimization. Experimental evaluations show that it achieves 95% material classification accuracy and a 1.5 cm median error in 3D size sensing. This work advances ISAC theory by establishing principles for wavelength-scale 3D object sensing, paving the way for new sensing applications.


  • Open Access

    Wi2DMeasure: WiFi-based 2D Object Size Measurement

    by Xuanzhi Wang, Junzhe Wang, Kai Niu, Jie Xiong, Fusang Zhang, Enze Yi, Anlan Yu, Zhiyun Yao, Daqing Zhang

    While a large range of sensing applications such as activity sensing and vital sign monitoring have been realized with WiFi sensing, using commercial WiFi devices to obtain fine-grained size information of objects remains challenging due to the narrow bandwidth of WiFi. Very recent studies attempted to measure object sizes using WiFi signals. However, these systems are still far from practical with a lot of limitations including requiring multiple transceiver pairs and can only measure one-dimensional size, hindering their real-life adoption. Also, these systems rely on Channel State Information (CSI) to work, which is only available on few commercial WiFi cards. In this work, we propose to employ a new channel data, i.e., Beamforming Feedback Information (BFI), widely available on almost all new generation WiFi cards for fine-grained size measurement. Through thoroughly analyzing the mathematical relationship between BFI and CSI, we show how to use BFI to achieve fine-grained size measurement. We propose a novel method to accurately measure the two-dimensional size of an object using a single transceiver pair by identifying the positions of singularities when the object passes through the diffraction zone of the transceiver pair. Experiment results show that Wi2DMeasure can accurately measure the two-dimensional size of objects under various conditions, achieving a small median error of only 3.7 mm.


  • Open Access

    WiProfile: Unlocking Diffraction Effects for Sub-Centimeter Target Profiling Using Commodity WiFi Devices

    by Zhiyun Yao, Xuanzhi Wang, Kai Niu, Rong Zheng, Junzhe Wang, Daqing Zhang

    Despite intensive research efforts in radio frequency noncontact sensing, capturing fine-grained geometric properties of objects, such as shape and size, remains an open problem using commodity WiFi devices. Prior attempts are incapable of characterizing object shape or size because they predominantly rely on weak signals reflected off objects in a very small number of directions. In this paper, motivated by the observation that the diffracted signals around an object between two WiFi devices carry the contour information of the object, we formulate the problem of reconstructing the 2D target profile and develop WiProfile, the first WiFi-based system that unlocks the diffraction effects for target profiling. We introduce a CSI-Profile model to characterize the relationship between the CSI measured at different target positions and the target profile in the diffraction zone. With suitable approximations, the inverse problem of deriving the target profile from CSI can be solved by the inverse Fresnel transform. To mitigate CSI measurement errors on commodity WiFi devices, we propose a novel antenna placement strategy. Comprehensive experiments demonstrate that WiProfile can accurately reconstruct profiles with median absolute errors of less than 1 cm under various conditions, and effectively estimate the profiles of everyday objects of diverse shapes, sizes, and materials. We believe this work opens up new directions for fine-grained target imaging using commodity WiFi devices.


  • Understanding the Diffraction Model in Static Multipath-Rich Environments for WiFi Sensing System Design

    by Xuanzhi Wang, Anlan Yu, Kai Niu, Weiyan Shi, Junzhe Wang, Zhiyun Yao, Rahul C. Shah, Hong Lu, Daqing Zhang

    Although WiFi-based contactless sensing has made significant progress in the past decade, most prior work still focus on the reflection zone far from WiFi transceivers, while few studies explore the diffraction zone near transceivers. Additionally, previous diffraction models only consider the CSI amplitude signal and ignore the impact of multipath. In this work, we develop an accurate diffraction model to characterize the relationship between both CSI amplitude and phase and target's movement in the diffraction zone. We further put forward the deformation forms of the model under static multipath conditions and find that the CSI patterns vary significantly with multipath. Consequently, the common assumption of a one-to-one mapping between CSI patterns and activities in existing work fails due to multipaths, degrading sensing performance when multipath changes. To address this challenge, we propose to extract a relative change pattern from CSI signals to recover the one-to-one mapping relations and eliminate the impact of static multipath. Extensive experiments under various multipath conditions demonstrate an accuracy higher than 96% for the coarse-grained intrusion detection and an average error rate of 0.6 bpm for the fine-grained respiration monitoring.


  • Open Access

    LoCal

    by Duo Zhang, Xusheng Zhang, Yaxiong Xie, Fusang Zhang, Xuanzhi Wang, Yang Li, Daqing Zhang

    Millimeter wave (mmWave) radar excels in accurately estimating the distance, speed, and angle of the signal reflectors relative to the radar. However, for diverse sensing applications reliant on radar's tracking capability, these estimates must be transformed from radar to room coordinates. This transformation hinges on the mmWave radar's location attribute, encompassing its position and orientation in room coordinates. Traditional outdoor calibration solutions for autonomous driving utilize corner reflectors as static reference points to derive the location attribute. When deployed in the indoor environment, it is challenging, even for the mmWave radar with GHz bandwidth and a large antenna array, to separate the static reference points from other multipath reflectors. To tackle the static multipath, we propose to deploy a moving reference point (a moving robot) to fully harness the velocity resolution of mmWave radar. Specifically, we select a SLAM-capable robot to accurately obtain its locations under room coordinates during motion, without requiring human intervention. Accurately pairing the locations of the robot under two coordinate systems requires tight synchronization between the mmWave radar and the robot. We therefore propose a novel trajectory correspondence based calibration algorithm that takes the estimated trajectories of two systems as input, decoupling the operations of two systems to the maximum. Extensive experimental results demonstrate that the proposed calibration solution exhibits very high accuracy (1.74 cm and 0.43° accuracy for location and orientation respectively) and could ensure outstanding performance in three representative applications: fall detection, point cloud fusion, and long-distance human tracking.


  • Open Access

    WiCross: I Can Know When You Cross Using COTS WiFi Devices

    by Weiyan Shi, Xuanzhi Wang, Kai Niu, Leye Wang, Daqing Zhang

    Detecting whether a target crosses the given zone (e.g., a door) can enable various practical applications in smart homes, including intelligent security and people counting. The traditional infrared-based approach only covers a line and can be easily cracked. In contrast, reusing the ubiquitous WiFi devices deployed in homes has the potential to cover a larger area of interest as WiFi signals are scattered throughout the entire space. By detecting the walking direction (i.e., approaching and moving away) with WiFi signal strength change, existing work can identify the behavior of crossing between WiFi transceiver pair. However, this method mistakenly classifies the turn-back behavior as crossing behavior, resulting in a high false alarm rate. In this paper, we propose WiCross, which can accurately distinguish the turn-back behavior with the phase statistics pattern of WiFi signals and thus robustly identify whether the target crosses the area between the WiFi transceiver pair. We implement WiCross with commercial WiFi devices and extensive experiments demonstrate that WiCross can achieve an accuracy higher than 95% with a false alarm rate of less than 5%.


  • Open Access

    How Target’s Location and Orientation Affect Velocity Extraction Accuracy in WiFi Sensing Systems

    by Kai Niu, Xuanzhi Wang, Zhiyun Yao, Fusang Zhang, Si Cheng, Yalan Jiang, Daqing Zhang

    WiFi sensing has emerged as a promising technology for smart services, including gesture recognition and trajectory tracking. One of the key challenges in these applications is accurately extracting velocity from WiFi signals. In this paper, we report our latest development to investigate the impact of location and orientation on velocity extraction in WiFi sensing systems. The proposed theory demonstrates that the velocity extraction significantly depends on the target’s location and orientation. Thus careful consideration of the target’s location and orientation is necessary for WiFi sensing system design. Specifically, two real-world applications (gesture recognition and trajectory tracking) are presented to illustrate how to eliminate the impact of location and orientation independent in velocity extraction.