ZYZhiyun Yao

Zhiyun Yao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zhiyun Yao has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    WiP: A New Sense for Agents to Understand Human Behavior through mmWave

    by Duo Zhang, Zhehui Yin, Xusheng Zhang, Hongliu Yang, Zhiyun Yao, Daqing Zhang

  • Open Access

    SDR-Sense: Enabling Robust Wi-Fi Sensing Under Strong Secondary Dynamic Reflection Interference

    by Jiarun Zhou, Wenwei Li, Junzhe Wang, Rong Zheng, Jiaming Fu, Zhiyun Yao, Hongliu Yang, Zizhou Fan, Qinxiao Quan, Daqing Zhang

    Highly reflective surfaces such as TV, whiteboard, and granite counters are common indoors. When human motion occurs near these surfaces, the transmitted Wi-Fi signal can undergo multiple specular reflections that involve both the moving target and the surrounding reflectors. These interactions give rise to secondary dynamic reflections (SDRs), additional time-varying signal components beyond the primary target reflection. SDRs can be comparable in strength to the desired sensing path, inducing non-negligible interference and significantly degrading Wi-Fi sensing performance. This paper presents SDR-Sense, a novel approach to recover target reflections in presence of strong SDRs. We analyze the spatial characteristics of SDRs and reveal their localized distribution within a sensing area. Two complementary metrics, Curvature Standard Deviation (CSD) and Interference to Sensing Path Loss Ratio (ISPLR), are proposed to detect periods of strong-reflection interference. SDR-Sense further identifies optimal differential intervals and applies CSI differencing to successively recover target reflections during interfered periods, thereby enhancing the sensing signal-to-interference ratio. Implemented on commodity Wi-Fi devices, SDR-Sense is evaluated through two representative sensing applications, namely, human trajectory tracking and gesture recognition, across diverse participants and environments. Experimental results show substantial performance gains over existing methods and demonstrate its potential to benefit a broad range of downstream Wi-Fi sensing tasks.

  • NearSense: Exploring NearLink for New-Generation Wireless Sensing

    by Zijun Han, Xuanzhi Wang, Yang Li, Dan Wu, Hongliu Yang, Wanru Ning, Zhiyun Yao, Wenwei Li, Xingqing Cheng, Zixiang Ma, et al.


  • Open Access

    MuPose: Breaking the Scalability Barrier of mmWave Multi-User Pose Estimation in the Wild

    by Duo Zhang, Zhehui Yin, Xusheng Zhang, Junzhe Wang, Hongliu Yang, Zhiyun Yao, Zizhou Fan, Wenwei Li, Daqing Zhang


  • Open Access

    FreeBFI: Enabling Fine-grained BFI Sensing with an Arbitrary Number of Antennas

    by Junzhe Wang, Wenwei Li, Jiarun Zhou, Jie Xiong, Xuanzhi Wang, Qiwei Wang, Zhiyun Yao, Xusheng Zhang, Duo Zhang, Daqing Zhang

    WiFi sensing has garnered significant attention from both academic and industrial communities, largely due to the widespread deployment of WiFi infrastructure. However, most existing WiFi sensing works rely on Channel State Information (CSI), which can only be extracted from very few commercial WiFi devices. The widespread adoption of new WiFi protocols, such as IEEE 802.11ac and 802.11ax, presents a valuable opportunity to leverage the widely available Beamforming Feedback Information (BFI) for WiFi sensing. Several studies have explored the potential of BFI-based WiFi sensing. However, these works are limited to a specific number of antennas and cannot achieve fine-grained BFI sensing across an arbitrary number of antennas. In this work, we design and implement FreeBFI, the first BFI-based WiFi sensing system that can work with an arbitrary number of antennas. FreeBFI fully exploits the channel information and the SNR information contained in BFI to establish the relationship between BFI and target motion across arbitrary antenna counts. Furthermore, to extract fine-grained motion information from the established relationship, FreeBFI smartly fuses the information from multiple antennas and proposes a novel optimization algorithm to enhance the motion signal. To showcase the sensing capability of FreeBFI, we select two representative WiFi sensing applications: respiration monitoring and gesture recognition. We conduct comprehensive experiments covering a wide range of antenna counts and test the performance of FreeBFI on various WiFi devices. Experimental results demonstrate that FreeBFI not only delivers accurate and robust sensing performance under arbitrary antenna counts but also enhances sensing accuracy as all antennas are utilized. For respiration monitoring, FreeBFI significantly extends the sensing range from 4 m to 8 m. For gesture recognition, FreeBFI improves complex gesture recognition accuracy by over 20%. We believe this work marks a significant step toward the broader adoption of WiFi sensing on next-generation WiFi devices.


  • WiCaliper: Simultaneous Material and 3D Size Sensing for Everyday Objects Using WiFi

    by Zhiyun Yao, Kai Niu, Xuanzhi Wang, Rong Zheng, Junzhe Wang, Duo Zhang, Daqing Zhang

    Alongside the ongoing standardization efforts for WiFi sensing, WiFi has emerged as a leading technology for Integrated Sensing and Communications (ISAC) with numerous sensing applications demonstrating its significant potentials. Material and size sensing, essential in quality control and digital twins, has drawn much interest. Yet, simultaneous material and 3D size sensing remains challenging, primarily due to the lack of suitable sensing models for objects at near-wavelength scales. This paper introduces WiCaliper, the first WiFi-based system addressing this problem. Its core innovation is DP-CSI, a novel sensing model that captures both diffraction and penetration effects to characterize the relationship between channel state information and the material, shape, and size of everyday 3D objects. To effectively solve for multiple object parameters, WiCaliper employs a two-step estimation process consisting of closed-form property function recovery and multi-view joint parameter optimization. Experimental evaluations show that it achieves 95% material classification accuracy and a 1.5 cm median error in 3D size sensing. This work advances ISAC theory by establishing principles for wavelength-scale 3D object sensing, paving the way for new sensing applications.


  • Open Access

    Breaking the Resolution Barriers of mmWave Arrays via Null Steering for Sleep Monitoring in Multi-Person Scenarios

    by Duo Zhang, Xusheng Zhang, Zhehui Yin, Pengfei Zhou, Hongliu Yang, Pei Wang, Zhiyun Yao, Junzhe Wang, Fusang Zhang, Daqing Zhang

    Couples sharing a bed is a common practice in households, making sleep monitoring in multi-person scenarios a significant area of research. The high sensitivity of mmWave makes it a promising tool for monitoring vital signs during sleep. However, implementing mmWave-based solutions for such settings poses two major challenges. First, the range and angular resolution of commercial mmWave radar are still inadequate for handling such close-proximity scenarios where individuals share the same bed. Second, even with sufficient angular resolution, aligning the main lobe with one target usually faces strong interference from other targets located in the sidelobes. To address these challenges, we leverage antenna pattern nulls---directions with zero gain---to mitigate interference and overcome resolution limitations. Implementing null steering on practical mmWave radar, however, is challenging due to the human body being an extended target that spans a range of angles, as well as hardware imperfections that render traditional algorithms ineffective. In this paper, we present mmNull, the first null steering system designed for commercial mmWave radars. mmNull models the human body as an extended target rather than a single point, derives a closed-form solution to maximize target gain while suppressing interferences, and employs a heuristic algorithm to address hardware imperfections. Comprehensive experiments show that mmNull achieves a more than 5x improvement in accuracy compared to current state-of-the-art (SOTA) methods for monitoring respiration rate, heart rate, and heart rate variability (HRV) in multi-person scenarios.


  • Open Access

    Wi2DMeasure: WiFi-based 2D Object Size Measurement

    by Xuanzhi Wang, Junzhe Wang, Kai Niu, Jie Xiong, Fusang Zhang, Enze Yi, Anlan Yu, Zhiyun Yao, Daqing Zhang

    While a large range of sensing applications such as activity sensing and vital sign monitoring have been realized with WiFi sensing, using commercial WiFi devices to obtain fine-grained size information of objects remains challenging due to the narrow bandwidth of WiFi. Very recent studies attempted to measure object sizes using WiFi signals. However, these systems are still far from practical with a lot of limitations including requiring multiple transceiver pairs and can only measure one-dimensional size, hindering their real-life adoption. Also, these systems rely on Channel State Information (CSI) to work, which is only available on few commercial WiFi cards. In this work, we propose to employ a new channel data, i.e., Beamforming Feedback Information (BFI), widely available on almost all new generation WiFi cards for fine-grained size measurement. Through thoroughly analyzing the mathematical relationship between BFI and CSI, we show how to use BFI to achieve fine-grained size measurement. We propose a novel method to accurately measure the two-dimensional size of an object using a single transceiver pair by identifying the positions of singularities when the object passes through the diffraction zone of the transceiver pair. Experiment results show that Wi2DMeasure can accurately measure the two-dimensional size of objects under various conditions, achieving a small median error of only 3.7 mm.


  • Open Access

    WiProfile: Unlocking Diffraction Effects for Sub-Centimeter Target Profiling Using Commodity WiFi Devices

    by Zhiyun Yao, Xuanzhi Wang, Kai Niu, Rong Zheng, Junzhe Wang, Daqing Zhang

    Despite intensive research efforts in radio frequency noncontact sensing, capturing fine-grained geometric properties of objects, such as shape and size, remains an open problem using commodity WiFi devices. Prior attempts are incapable of characterizing object shape or size because they predominantly rely on weak signals reflected off objects in a very small number of directions. In this paper, motivated by the observation that the diffracted signals around an object between two WiFi devices carry the contour information of the object, we formulate the problem of reconstructing the 2D target profile and develop WiProfile, the first WiFi-based system that unlocks the diffraction effects for target profiling. We introduce a CSI-Profile model to characterize the relationship between the CSI measured at different target positions and the target profile in the diffraction zone. With suitable approximations, the inverse problem of deriving the target profile from CSI can be solved by the inverse Fresnel transform. To mitigate CSI measurement errors on commodity WiFi devices, we propose a novel antenna placement strategy. Comprehensive experiments demonstrate that WiProfile can accurately reconstruct profiles with median absolute errors of less than 1 cm under various conditions, and effectively estimate the profiles of everyday objects of diverse shapes, sizes, and materials. We believe this work opens up new directions for fine-grained target imaging using commodity WiFi devices.


  • Understanding the Diffraction Model in Static Multipath-Rich Environments for WiFi Sensing System Design

    by Xuanzhi Wang, Anlan Yu, Kai Niu, Weiyan Shi, Junzhe Wang, Zhiyun Yao, Rahul C. Shah, Hong Lu, Daqing Zhang

    Although WiFi-based contactless sensing has made significant progress in the past decade, most prior work still focus on the reflection zone far from WiFi transceivers, while few studies explore the diffraction zone near transceivers. Additionally, previous diffraction models only consider the CSI amplitude signal and ignore the impact of multipath. In this work, we develop an accurate diffraction model to characterize the relationship between both CSI amplitude and phase and target's movement in the diffraction zone. We further put forward the deformation forms of the model under static multipath conditions and find that the CSI patterns vary significantly with multipath. Consequently, the common assumption of a one-to-one mapping between CSI patterns and activities in existing work fails due to multipaths, degrading sensing performance when multipath changes. To address this challenge, we propose to extract a relative change pattern from CSI signals to recover the one-to-one mapping relations and eliminate the impact of static multipath. Extensive experiments under various multipath conditions demonstrate an accuracy higher than 96% for the coarse-grained intrusion detection and an average error rate of 0.6 bpm for the fine-grained respiration monitoring.