YFYasuhiro Fuwa

Yasuhiro Fuwa

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yasuhiro Fuwa has a total of 66 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Model-Based Development of Pulsed Electromagnets for Accelerators by Simulation

    by T. Takayanagi, T. Ueno, K. Horino, M. Sugita, Y. Fuwa, Shinozaki

    In accelerators, pulsed electromagnets are used for beam injections, extractions, and localization of beam losses. Compared to DC electromagnets, pulsed electromagnets generate powerful magnetic fields instantaneously and produce Joule heat only for a short time, making them more energy efficient. If the design of pulse electromagnets and power supplies becomes easier, they are expected to have a wide range of applications in sustainable accelerators. The design of pulsed electromagnets requires three-dimensional transient magnetic field analysis that takes into account eddy currents and skin effects, but high-precision design can be achieved by using analysis software such as OPERA-3D. On the other hand, in the design of pulsed power supplies, it is necessary to treat the load impedance as a time-varying model, but in many cases, actual measurement data is insufficient. Conventionally, electromagnets and power supplies have been analyzed separately, so there was a risk of problems being discovered during post-completion evaluation tests. To address this issue, we propose model-based development (MBD) that enables integrated analysis of both components. In this study, we evaluated the following two integrated analysis approaches: (1) an MBD method that links OPERA-3D's transient analysis model with its circuit editor function, and (2) an MBD method that combines OPERA-3D's analysis results with circuit simulation in MATLAB/Simulink. The introduction of MBD is expected to reduce power-on test time and the number of prototypes, leading to reduced development costs and shorter development times. This presentation will report on preliminary results of an evaluation of MBD implementation.

  • Development of a Fast-Rising Short-Pulse High-Voltage Power Supply Using SiC-MOSFETs for the J-PARC Kicker System

    by Tomohiro Takayanagi, Koki Horino, Tomoaki Ueno, Moe Sugita, Yasuhiro Fuwa, Shinichi Shinozaki, Ayato Ono, Akira Tokuchi, Naoya Ikoma, Hiroaki Kamezaki

    We have been developing a semiconductor switch power supply using silicon carbide metal–oxide–semiconductor field-effect transistors (SiC-MOSFETs) as an alternative to conventional discharge tube thyratron-type switch power supplies. The newly developed power supply, based on the linear transformer driver (LTD) circuit system, delivers 40-kV, 2-kA, and 1.2- $\mu $ s pulsewidth at 25 Hz. This power supply has achieved performance that allows replacing the current kicker power supply using the thyratron switch in the Japan Proton Accelerator Research Complex (J-PARC) 3-GeV rapid cycling synchrotron (RCS). The specifications of the developed LTD pulse power supply circuit for SiC-MOSFETs, the corona-free high-voltage section, and the results of power saving and miniaturization will be reported.

  • Addendum: Development of a strip-shaped X-ray mapping system for 9-cell superconducting cavities

    by Y. Kuriyama, Y. Iwashita, Y. Fuwa, H. Tongu, H. Hayano, R.L. Geng

  • Development of a strip-shaped X-ray mapping system for 9-cell superconducting cavities

    by Y. Kuriyama, Y. Iwashita, Y. Fuwa, H. Tongu, H. Hayano, R.L. Geng

    Electrons emitted via field emission during superconducting (SC) radio-frequency (RF) cavity tests at vertical test stands often collide with the iris region inside the cavity, generating X-rays at these locations. In 1.3 GHz 9-cell SC RF cavities designed for the International Linear Collider (ILC), stiffener rings located outside the iris region between cells can interfere with X-ray detection, complicating the precise identification of field emission sites. Hence, we developed a high-density strip X-ray mapping systems (sX-map) that can be inserted into the iris region of ILC-type 9-cell SC RF cavities. This sX-map facilitates efficient and accurate detection of X-rays generated near the irises, unaffected by the presence of stiffener rings. The sX-map consisted of 32 sensors per strip, with sensors spaced approximately 10 mm apart. It was deployed in every iris of the 9-cell cavity, using a total of 320 sensors. A multiplexer was employed to facilitate the readout of a large number of detectors using a minimal number of signal lines, connecting the strips inside within the vertical test cryostat. In a vertical test conducted at Jefferson Lab (JLab), we demonstrated the capability of sX-map to detect X-rays despite the presence of a stiffener ring. This paper presents the detailed design of the sX-map and the results from the vertical test at JLab.

  • Open Access

    Performance of the Fully Equipped Spin Flip Chopper for the Neutron Lifetime Experiment at J-PARC

    by K Mishima, G Ichikawa, Y Fuwa, T Hasegawa, M Hino, R Hosokawa, T Ino, Y Iwashita, M Kitaguchi, S Matsuzaki, et al.

    To solve the “neutron lifetime puzzle,” where measured neutron lifetimes differ depending on the measurement methods, an experiment with a pulsed neutron beam at J-PARC is in progress. In this experiment, neutrons are bunched into 40-cm lengths using a spin flip chopper (SFC), where the statistical sensitivity was limited by the aperture size of the SFC. The SFC comprises three sets of magnetic supermirrors and two resonant spin flippers. In this paper, we discuss an upgrade to enlarge the apertures of the SFC. With this upgrade, the statistics per unit time of the neutron lifetime experiment increased by a factor of 2.8, while maintaining a signal-to-noise ratio of 250–400, which is comparable to the previous one. Consequently, the time required to reach a precision of 1 s in the neutron lifetime experiment was reduced from 590 to 170 days, which is a significant reduction in time. This improvement in the statistics will also contribute to the reduction of systematic uncertainties, such as background evaluation, fostering further advancements in the neutron lifetime experiments at J-PARC.


  • Long-Axis Uniform Magnetic Field Generation Using Permanent Magnets

    by Yoshihisa Iwashita, Yasutoshi Kuriyama, Yasuhiro Fuwa

    A permanent magnet can be used to generate an axisymmetric uniform magnetic field over a long distance. To satisfy Ampere's law, which states that the line-integral value of the magnetic field is zero, a magnetic field region of opposite polarity appears somewhere along the axis while maintaining uniformity in a certain range along the axis. Using this configuration, a magnetic field generator for a Faraday rotation device for laser light was fabricated. This device has a large bore of 30 mm in diameter to handle ultra-high-power lasers and can hold a large crystal disc for Faraday rotation. The irregularity in the central plane is less than 1% within the bore diameter. This configuration can also be applied to long axisymmetric beam transport magnets. This technique can be extended to control the gradient of the magnetic field distributions, such as the focusing field of a klystron.


  • Design Improvement of Bipolar Correction Magnet With Permanent Magnets

    by Yasutoshi Kuriyama, Yoshihisa Iwashita, Yasuhiro Fuwa, Nobuhiro Terunuma

    We are developing a correction magnet for charged particle beams using permanent magnets. By rotating the rod of the permanent magnet that generates the magnetic field, the magnetic field can be changed to bipolarity. To verify the principle of this bi-polarity change, a prototype was built, and its performance was evaluated. The performance evaluation of the prototype machine revealed that the inhomogeneity of the remanent magnetization of the permanent magnet has a significant effect on the multipole component. To suppress this effect, a compensating magnet with additional anisotropic intermediate poles is being considered. In this presentation, we report the results of our study on improvement measures to suppress the multipole component.


  • Open Access

    High-power test of an interdigital H -mode drift tube linac for the J-PARC muon g−2 and electric dipole moment experiment

    by Y. Nakazawa, E. Cicek, K. Futatsukawa, Y. Fuwa, N. Hayashizaki, T. Iijima, H. Iinuma, Y. Iwata, Y. Kondo, T. Mibe, et al.

    We conducted a high-power test of a prototype cavity of a 324-MHz interdigital H-mode drift tube linac (IH-DTL) for the precise measurement of the muon anomalous magnetic moment (g−2) and electric dipole moment (EDM). This prototype cavity (short IH) was developed to verify the fabrication methodology for the IH-DTL cavity with a monolithic drift tube structure. The electromagnetic field distribution was measured and compared with the finite element method simulation results, and the fabrication accuracy of the monolithic drift tube was confirmed to satisfy the requirements. After 40 h of conditioning, the short IH was stably operated with an rf power of 88 kW, which corresponds to a 10% higher accelerating field than the design field (E0) of 3.0  MV/m. In addition, the thermal characteristics and frequency response were measured, verifying that the experimental data were consistent with the three-dimensional model. In this paper, the design, fabrication, and low-power and high-power tests of this IH-DTL for muon acceleration are described.


  • Properties of Praseodymium Permanent Magnet for Cryogenic Hybrid Magnet

    by Yasuhiro Fuwa, Yoshihisa Iwashita, Akihiro Kondo

    An application of permanent magnet technology to cryogenic hybrid magnets is proposed. The requirement for supercon-ducting magnet may be reduced by generating an additional magnetic field of about 1 T by permanent magnets. While the remanent field of conventional Nd2Fe14B magnets decreases at around 100 K due to spin reorientation, Pr2Fe14B magnets con-sisting of praseodymium (Pr) instead of neodymium (Nd) do not show such a decrease. In order to investigate the magnetic properties of the Pr2Fe14B and Nd2Fe14B magnets, magnetiza-tion experiments at a temperature down to 1.4 K were per-formed. The coercivity of the Pr2Fe14B at 4 K was measured as high as 9 T, and the remanent magnetic flux density was esti-mated at about 1.4 T. On the other hand, the coercivity of Nd2Fe14B at 4 K was about 6 T, and the remanent flux density was less than Pr2Fe14B magnets. Therefore, Pr2Fe14B magnets may be applicable as the field booster in the high-field hybrid magnets. Based on the experimental result, a magnet configu-ration for an accelerator dipole magnet is also proposed as an example of application.


  • Performance of Bipolar Correction Magnet with Permanent Magnets

    by Yasutoshi Kuriyama, Yoshihisa Iwashita, Yasuhiro Fuwa, Nobuhiro Terunuma

    A prototype bipolar correction magnet with permanent magnets, which is realized by rotatable permanent magnet rods, was fabricated and magnetic field measurements were performed. Based on the evaluation, improvement on the magnet structure is under study. The new design will be discussed here.