Pablo Romero-Tello
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Pablo Romero-Tello has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- José Enrique Gutiérrez-Romero
Department of Naval Architecture Technology, Universidad Politécnica de Cartagena, Paseo Alfonso XIII 52, 30203 Cartagena, Spain
8 shared publications - Antonio José Lorente-López
Departamento de Fisica Aplicada y Tecnología Naval, Universidad Politecnica de Cartagena, Cartagena, Spain
4 shared publications - Borja Servan-Camas
Centre Internacional de Métodes Numérics en Enginyeria (CIMNE), Gran Capitán s/n, 08034 Barcelona, Spain
3 shared publications - Samuel Ruiz-Capel
Department of Built Environment, Faculty of Technology Art and Design, Oslo Metropolitan University, Oslo, Norway
3 shared publications A. Lorente-Pérez
1 shared publication- Aase Reyes
Norwegian University of Science and Technology (NTNU)
1 shared publication
Latest Publications
- Open Access
- 27 August 2026
- Published by Elsevier in Ocean Engineering
- Vol. 366
AI-assisted seakeeping operability screening for early-stage hull-form optimisation
- 27 August 2026
- Published by Elsevier in Ocean Engineering
- Vol. 366
Open AccessAI-assisted seakeeping operability screening for early-stage hull-form optimisation
- Open Access
- 23 May 2025
- Published by Springer Nature in Journal of Ocean Engineering and Marine Energy
- Vol. 11 (3) , 701-732
Predicting seakeeping of conventional monohull vessels with forward speed using artificial neural networks
This work aims at obtaining Artificial Neural Networks (ANNs) to assess the seakeeping of ships navigating with forward speed. The targets of these ANNs are the Froude–Krylov and wave diffraction-radiation loads needed to compute the ship’s Response Amplitude Operators (RAOs). This research presents a methodology for obtaining the optimal ANN architecture, generating the ship database used for training, and data treatment to enable the prediction of the targets. The dataset is generated with a tridimensional potential code used to solve the wave diffraction-radiation problem using the Boundary Element Method (BEM) for different wave headings and a range of Froude numbers. To assess the developed tool, six assessment ships not included within the training database are used to compare the ANNs predictions against BEM results. The results show deviations of less than 3% compared to BEM for RAO curves. Moreover, RAO curves exhibit high adjustment compared with BEM results for different encounter wave frequencies. Furthermore, ANN’s computational times show a speedup of ×3750 respect to BEM computations.
- 23 May 2025
- Published by Springer Nature in Journal of Ocean Engineering and Marine Energy
- Vol. 11 (3) , 701-732
Open AccessPredicting seakeeping of conventional monohull vessels with forward speed using artificial neural networks
This work aims at obtaining Artificial Neural Networks (ANNs) to assess the seakeeping of ships navigating with forward speed. The targets of these ANNs are the Froude–Krylov and wave diffraction-radiation loads needed to compute the ship’s Response Amplitude Operators (RAOs). This research presents a methodology for obtaining the optimal ANN architecture, generating the ship database used for training, and data treatment to enable the prediction of the targets. The dataset is generated with a tridimensional potential code used to solve the wave diffraction-radiation problem using the Boundary Element Method (BEM) for different wave headings and a range of Froude numbers. To assess the developed tool, six assessment ships not included within the training database are used to compare the ANNs predictions against BEM results. The results show deviations of less than 3% compared to BEM for RAO curves. Moreover, RAO curves exhibit high adjustment compared with BEM results for different encounter wave frequencies. Furthermore, ANN’s computational times show a speedup of ×3750 respect to BEM computations.
- 1 January 2025
- Published by Emerald Publishing in International Journal of Structural Integrity
- Vol. 16 (1) , 60-84
Structural design optimization of pressure hull using genetic algorithm and finite element analysis
Purpose: The main objective is to develop a new design methodology for pressure hulls, prioritizing steel weight reduction without compromising structural safety. Genetic algorithms (GA) will be employed to optimize the structural weight of the hull of a pressure vessel, considering the Det Norske Veritas (DNV) standard formulation. This includes optimizing both the scantling of the pressure hull and the dimensions of the frames while complying with constraints based on the DNV regulation: nominal, over-immersion and collapse pressures. The proposed solution will be analyzed using finite element analysis (FEA) to verify that the obtained scantlings meet the design requirements.Design/methodology/approach: An optimization of the design parameters of the structure of a pressure hull based on GA is proposed. The starting point is individuals randomly generated by combining the different values that each parameter will take. The surviving designs will be required to meet DNV standards and will be ranked according to the structural weight of each design. Prevailing will be those genes that make designs that comply with the standards and are less heavy. Finally, the feasibility of the design proposed by the GA will be tested by FEM.Findings: The structural integrity of the design resulting from the application of GA (which complies with DNV regulations) has been evaluated by means of FEM considering different constructive defects. In summary, the proposed methodology combined with GA provides a preliminary design of the pressurized hull in a fast way, ensuring compliance with the structural requirements according to the current regulations. Furthermore, this design is optimized in terms of its own weight. The reduction in structural weight provides a reserve of buoyancy that can be used to increase other weight categories, thus extending the operating time of the pressure vessel.Originality/value: This novel approach allows to quickly obtain a preliminary design of a pressure hull structure optimized for minimum weight and ensuring compliance with classification societies. The proposed methodology provides the user with a preliminary design with lower material cost and allows the increase of other weight items.
- 1 January 2025
- Published by Emerald Publishing in International Journal of Structural Integrity
- Vol. 16 (1) , 60-84
Structural design optimization of pressure hull using genetic algorithm and finite element analysis
Purpose: The main objective is to develop a new design methodology for pressure hulls, prioritizing steel weight reduction without compromising structural safety. Genetic algorithms (GA) will be employed to optimize the structural weight of the hull of a pressure vessel, considering the Det Norske Veritas (DNV) standard formulation. This includes optimizing both the scantling of the pressure hull and the dimensions of the frames while complying with constraints based on the DNV regulation: nominal, over-immersion and collapse pressures. The proposed solution will be analyzed using finite element analysis (FEA) to verify that the obtained scantlings meet the design requirements.Design/methodology/approach: An optimization of the design parameters of the structure of a pressure hull based on GA is proposed. The starting point is individuals randomly generated by combining the different values that each parameter will take. The surviving designs will be required to meet DNV standards and will be ranked according to the structural weight of each design. Prevailing will be those genes that make designs that comply with the standards and are less heavy. Finally, the feasibility of the design proposed by the GA will be tested by FEM.Findings: The structural integrity of the design resulting from the application of GA (which complies with DNV regulations) has been evaluated by means of FEM considering different constructive defects. In summary, the proposed methodology combined with GA provides a preliminary design of the pressurized hull in a fast way, ensuring compliance with the structural requirements according to the current regulations. Furthermore, this design is optimized in terms of its own weight. The reduction in structural weight provides a reserve of buoyancy that can be used to increase other weight categories, thus extending the operating time of the pressure vessel.Originality/value: This novel approach allows to quickly obtain a preliminary design of a pressure hull structure optimized for minimum weight and ensuring compliance with classification societies. The proposed methodology provides the user with a preliminary design with lower material cost and allows the increase of other weight items.
- 11 December 2024
- Published by Emerald Publishing in International Journal of Structural Integrity
- Vol. 16 (1) , 127-158
Influence of the main bulb’s parameters of bulbous bow vessels on heave and pitch motions for head sea
Purpose: This paper addresses the influence of the main bulb’s parameters of a containership on heave and pitch RAO for head waves.Design/methodology/approach: To obtain the RAO curves, these parameters are scattered over the design space through latin hypercube sampling (LHS), where different bulb designs are obtained using the free form deformation (FFD) technique. Linear RAO curves are calculated based on numerical software, split into various frequency intervals and assessed according to six evaluation parameters.Findings: The findings show that maximum, minimum and average values of the RAO curve are useful indicators to study the RAO of a ship. Average values of the curve are reduced more than 6% for heave and over 24% for pitch with respect to a vessel with a conventional bulbous bow. The best designs concentrate the volume around the mid-lower part of the bulb, whilst the worst designs concentrate the bulb volume towards the upper part of the bulb.Originality/value: In the literature, we get an overview of the influence of different bows on seakeeping. However, the influence of the bulb or large variations of the bow in a parametric way have not been studied yet. Since most of these parameters are derived from the RAO curve and ship motions, this paper focuses on studying the RAO curve for heave and ship motions of a bulbous bow containership. The objective is to minimize the RAO values of the curves so that most derived parameters reduce their values as well.
- 11 December 2024
- Published by Emerald Publishing in International Journal of Structural Integrity
- Vol. 16 (1) , 127-158
Influence of the main bulb’s parameters of bulbous bow vessels on heave and pitch motions for head sea
Purpose: This paper addresses the influence of the main bulb’s parameters of a containership on heave and pitch RAO for head waves.Design/methodology/approach: To obtain the RAO curves, these parameters are scattered over the design space through latin hypercube sampling (LHS), where different bulb designs are obtained using the free form deformation (FFD) technique. Linear RAO curves are calculated based on numerical software, split into various frequency intervals and assessed according to six evaluation parameters.Findings: The findings show that maximum, minimum and average values of the RAO curve are useful indicators to study the RAO of a ship. Average values of the curve are reduced more than 6% for heave and over 24% for pitch with respect to a vessel with a conventional bulbous bow. The best designs concentrate the volume around the mid-lower part of the bulb, whilst the worst designs concentrate the bulb volume towards the upper part of the bulb.Originality/value: In the literature, we get an overview of the influence of different bows on seakeeping. However, the influence of the bulb or large variations of the bow in a parametric way have not been studied yet. Since most of these parameters are derived from the RAO curve and ship motions, this paper focuses on studying the RAO curve for heave and ship motions of a bulbous bow containership. The objective is to minimize the RAO values of the curves so that most derived parameters reduce their values as well.
- Open Access
- 24 September 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (10) , 1691
Notes on Towed Self-Propulsion Experiments with Simulated Managed Ice in Traditional Towing Tanks
Efficiency estimation of a propeller behind a vessel’s hull while sailing through ice floes, together with the ship’s resistance to motion, is a key factor in designing the power plant and determining the safety measures of a ship. This paper encloses the results from the experiments conducted at the CEHINAV towing tank, which consisted of analyzing the influence of the concentration at the free surface of artificial blocks, simulating ice, in propeller–block interactions. Thrust and torque were measured for a towed self-propelled ship model through simulated broken ice blocks made of paraffin wax. Three block concentrations of different block sizes and three model speeds were studied during the experimentation. Open-water self-propulsion tests and artificial broken ice towed self-propulsion tests are shown and compared in this work. The most relevant observations are outlined at the end of this paper, as well as some guidelines for conducting artificial ice-towed self-propulsion tests in traditional towing tanks.
- 24 September 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (10) , 1691
Open AccessNotes on Towed Self-Propulsion Experiments with Simulated Managed Ice in Traditional Towing Tanks
Efficiency estimation of a propeller behind a vessel’s hull while sailing through ice floes, together with the ship’s resistance to motion, is a key factor in designing the power plant and determining the safety measures of a ship. This paper encloses the results from the experiments conducted at the CEHINAV towing tank, which consisted of analyzing the influence of the concentration at the free surface of artificial blocks, simulating ice, in propeller–block interactions. Thrust and torque were measured for a towed self-propelled ship model through simulated broken ice blocks made of paraffin wax. Three block concentrations of different block sizes and three model speeds were studied during the experimentation. Open-water self-propulsion tests and artificial broken ice towed self-propulsion tests are shown and compared in this work. The most relevant observations are outlined at the end of this paper, as well as some guidelines for conducting artificial ice-towed self-propulsion tests in traditional towing tanks.
- 29 June 2024
- Published by Springer Nature
- p. 81-86
High Fidelity Hydroelastic Model Applied to a Vessel Using MMR
- 29 June 2024
- Published by Springer Nature
- p. 81-86
High Fidelity Hydroelastic Model Applied to a Vessel Using MMR
- Open Access
- 1 January 2023
- Published by Scipedia, S.L. in Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería
- Vol. 39 (4)
Seakeeping analysis of dead ship condition in fishing ships based on Artificial Neural Networks
In the operation of ships, assessing seakeeping performance is crucial. Historically, this has been done through experimentation in towing tank basins or numerical computations. However, with the rise of Artificial Intelligence (AI) and increased computational resources, there are many opportunities to use AI in predicting seakeeping performance. This research will utilize a pre-trained Artificial Neural Network (ANN) to evaluate the behaviour of fishing vessels in various operational scenarios. One of the key advantages of using these algorithms is the ability to predict a large number of scenarios quickly, compared to traditional methods. By analysing millions of variations in the principal dimensions of a fishing ship and different sea states, the study aims to identify the optimal seakeeping performance in challenging conditions, ultimately improving ship safety by examining principal form coefficients and dimensions. The research will also determine significant conclusions.
- 1 January 2023
- Published by Scipedia, S.L. in Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería
- Vol. 39 (4)
Open AccessSeakeeping analysis of dead ship condition in fishing ships based on Artificial Neural Networks
In the operation of ships, assessing seakeeping performance is crucial. Historically, this has been done through experimentation in towing tank basins or numerical computations. However, with the rise of Artificial Intelligence (AI) and increased computational resources, there are many opportunities to use AI in predicting seakeeping performance. This research will utilize a pre-trained Artificial Neural Network (ANN) to evaluate the behaviour of fishing vessels in various operational scenarios. One of the key advantages of using these algorithms is the ability to predict a large number of scenarios quickly, compared to traditional methods. By analysing millions of variations in the principal dimensions of a fishing ship and different sea states, the study aims to identify the optimal seakeeping performance in challenging conditions, ultimately improving ship safety by examining principal form coefficients and dimensions. The research will also determine significant conclusions.
- Open Access
- 1 January 2023
- Published by Scipedia, S.L.
- Vol. Artificial
Parametric roll prediction based on Machine Learning strategies
- 1 January 2023
- Published by Scipedia, S.L.
- Vol. Artificial
Open AccessParametric roll prediction based on Machine Learning strategies
- Open Access
- 1 January 2023
- Published by Scipedia, S.L.
- Vol. Artificial
Optimisation of ship form based on seakeeping behaviour using Machine Learning
- 1 January 2023
- Published by Scipedia, S.L.
- Vol. Artificial
Open AccessOptimisation of ship form based on seakeeping behaviour using Machine Learning
- Open Access
- 18 June 2022
- Published by Elsevier in Journal of Ocean Engineering and Science
- Vol. 8 (4) , 344-366
Prediction of seakeeping in the early stage of conventional monohull vessels design using artificial neural network
- 18 June 2022
- Published by Elsevier in Journal of Ocean Engineering and Science
- Vol. 8 (4) , 344-366
Open AccessPrediction of seakeeping in the early stage of conventional monohull vessels design using artificial neural network