Jonas Simon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jonas Simon has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Jochen Moll
Department of Mechanical Engineering, University of Siegen, Paul-Bonatz-Straße 9-11, 57076 Siegen, Germany
8 shared publications - Viktor Krozer
Department of Physics, Goethe University Frankfurt, 60438 Frankfurt, Germany
5 shared publications - Fabian Lurz
Otto von Guericke University Magdeburg
3 shared publications - Manuel E. Rao
Department of Mechanical Engineering, University of Siegen, Paul-Bonatz-Straße 9-11, 57076 Siegen, Germany
3 shared publications - Thomas Kurin
Friedrich-Alexander University Erlangen-Nuremberg
3 shared publications Andreas Nuber
Wölfel Engineering GmbH + Co. KG, Höchberg, Germany
2 shared publications
Latest Publications
- Open Access
- 9 June 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (12) , 6478
Structural Health Monitoring of Aerial Vehicles Using Guided Electromagnetic Waves in K-Band: Initial Damage Detection Results from Drone Flight Testing
This paper introduces a novel structural health monitoring (SHM) approach based on guided electromagnetic waves propagating in a dielectric waveguide in the frequency range from 23.5 to 26 GHz. This approach enables the detection of structural damage based on the analysis of radar signals. This paper presents the performance of the methodology through an experimental case study considering an autonomous heavy lift drone where the whole SHM system is integrated onboard. The whole data acquisition pipeline is described, and damage detection results based on a damage indicator approach are presented and discussed. Finally, this work proves the ability of guided electromagnetic wave technology to be used in flying aerial vehicles. The methodology can be applied to other aircraft structures and application cases in the future.
- 9 June 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (12) , 6478
Open AccessStructural Health Monitoring of Aerial Vehicles Using Guided Electromagnetic Waves in K-Band: Initial Damage Detection Results from Drone Flight Testing
This paper introduces a novel structural health monitoring (SHM) approach based on guided electromagnetic waves propagating in a dielectric waveguide in the frequency range from 23.5 to 26 GHz. This approach enables the detection of structural damage based on the analysis of radar signals. This paper presents the performance of the methodology through an experimental case study considering an autonomous heavy lift drone where the whole SHM system is integrated onboard. The whole data acquisition pipeline is described, and damage detection results based on a damage indicator approach are presented and discussed. Finally, this work proves the ability of guided electromagnetic wave technology to be used in flying aerial vehicles. The methodology can be applied to other aircraft structures and application cases in the future.
- Open Access
Radar-Based Damage Detection in a Wind Turbine Blade Using Convolutional Neural Networks: A Proof-of-Concept Under Fatigue Loading
This paper reports a convolutional neural network (CNN)-based damage detection approach for radar-based structural health monitoring of wind turbine blades. Subsequent radar measurements are transformed into an image-type representation for use as CNN input. In contrast to conventional approaches that require compensation for temperature and loading effects, the proposed framework inherently learns all required information during the training phase. Its damage detection performance (i.e., detecting intact vs. damaged condition) is demonstrated using measurements from multiple embedded radar sensors during fatigue testing of a wind turbine blade with a length of 31 m. The achieved F1-score for correct damage classification is between 91% and 100% for both the unloaded and the loaded blade.
Open AccessRadar-Based Damage Detection in a Wind Turbine Blade Using Convolutional Neural Networks: A Proof-of-Concept Under Fatigue Loading
This paper reports a convolutional neural network (CNN)-based damage detection approach for radar-based structural health monitoring of wind turbine blades. Subsequent radar measurements are transformed into an image-type representation for use as CNN input. In contrast to conventional approaches that require compensation for temperature and loading effects, the proposed framework inherently learns all required information during the training phase. Its damage detection performance (i.e., detecting intact vs. damaged condition) is demonstrated using measurements from multiple embedded radar sensors during fatigue testing of a wind turbine blade with a length of 31 m. The achieved F1-score for correct damage classification is between 91% and 100% for both the unloaded and the loaded blade.
- Open Access
- 28 March 2025
- Published by SAGE Publications in Structural Health Monitoring
- Vol. 25 (4) , 2739-2750
Real-time onboard propeller fault diagnosis of autonomous delivery drones through vibration analysis
Delivery drones have become increasingly important in recent years. It is advantageous for commercialization that suppliers are able to deliver orders autonomously and directly to their customers via air transport. However, the safety aspect must be considered. Real-time inspection of delivery drones during operation helps preventing accidents and a threat to civilians. For continuous monitoring, the sensors must be installed on the drone throughout the flight. A promising approach uses the inherent excitation of the servomotors for vibration-based Structural Health Monitoring (SHM). Vibrations can be recorded using triaxial acceleration sensors and analyzed using suitable methods such as stochastic subspace-based fault detection or histogram difference. In comparison to nondestructive testing, reference measurements of the intact structure are necessary in SHM. As soon as laboratory conditions no longer exist and environmental parameters, for example, wind, influence the vibration spectrum, classification methods are necessary for compensation. The recording of comprehensive reference datasets with different environmental conditions is limited by the battery life. This work focuses on diagnosing irreversible rotor blade damages of an 8.5 kg delivery drone. A parametric analysis taking into account systematic fusion of damage indicators and a specific number of considered references were determined for this purpose in order to assess the severity of the existing damage. Onboard SHM to evaluate the airworthiness in real time for linear and hovering flights was achieved.
- 28 March 2025
- Published by SAGE Publications in Structural Health Monitoring
- Vol. 25 (4) , 2739-2750
Open AccessReal-time onboard propeller fault diagnosis of autonomous delivery drones through vibration analysis
Delivery drones have become increasingly important in recent years. It is advantageous for commercialization that suppliers are able to deliver orders autonomously and directly to their customers via air transport. However, the safety aspect must be considered. Real-time inspection of delivery drones during operation helps preventing accidents and a threat to civilians. For continuous monitoring, the sensors must be installed on the drone throughout the flight. A promising approach uses the inherent excitation of the servomotors for vibration-based Structural Health Monitoring (SHM). Vibrations can be recorded using triaxial acceleration sensors and analyzed using suitable methods such as stochastic subspace-based fault detection or histogram difference. In comparison to nondestructive testing, reference measurements of the intact structure are necessary in SHM. As soon as laboratory conditions no longer exist and environmental parameters, for example, wind, influence the vibration spectrum, classification methods are necessary for compensation. The recording of comprehensive reference datasets with different environmental conditions is limited by the battery life. This work focuses on diagnosing irreversible rotor blade damages of an 8.5 kg delivery drone. A parametric analysis taking into account systematic fusion of damage indicators and a specific number of considered references were determined for this purpose in order to assess the severity of the existing damage. Onboard SHM to evaluate the airworthiness in real time for linear and hovering flights was achieved.
- 1 July 2024
- Published by NDT.net GmbH & Co. KG in e-Journal of Nondestructive Testing
- Vol. 29 (7)
Damage detection in wind turbine blades using embedded radar networks
To ensure the availability and operational safety of wind turbine blades, regular inspections are required according to specified maintenance intervals. As with all periodic inspections, damage that develops between two inspection dates remains undetected until the next inspection. In recent years, monitoring systems have therefore been developed that enable independent structural health monitoring (SHM) with permanently installed sensors. The most important representatives here include vibration analysis, acoustic emission testing and ultrasonic methods. In addition, it is necessary for an SHM system to distinguish between signal changes resulting from damage or changing environmental and operating conditions. The present work presents a new approach for the in-situ assessment of wind turbine blades via embedding radar networks in the frequency band from 58 to 63.5 GHz. Therefore, 40 FMCW (frequency-modulated continuous wave) radar sensors have been embedded into a wind turbine blade during manufacturing. This contribution provides additional information related to the hardware design of the sensor nodes, its preliminary testing and the specific implementation of the radar network during a fullscale fatigue test of a 31m long wind turbine blade [1]. Damage indicators can be formulated relative to baseline conditions to see the development of fatigue damage over time. Reference: [1] Simon, J.; Kurin, T.; Moll, J.; Bagemiel, O.; Wedel, R.; Krause, S.; Lurz, F.; Nuber, A.; Issakov, V. & Krozer, V., Embedded Radar Networks for Damage Detection in Wind Turbine Blades: Validation in a Full-scale Fatigue Test, Structural Health Monitoring, 2023, https://doi.org/10.1177/14759217231152815
- 1 July 2024
- Published by NDT.net GmbH & Co. KG in e-Journal of Nondestructive Testing
- Vol. 29 (7)
Damage detection in wind turbine blades using embedded radar networks
To ensure the availability and operational safety of wind turbine blades, regular inspections are required according to specified maintenance intervals. As with all periodic inspections, damage that develops between two inspection dates remains undetected until the next inspection. In recent years, monitoring systems have therefore been developed that enable independent structural health monitoring (SHM) with permanently installed sensors. The most important representatives here include vibration analysis, acoustic emission testing and ultrasonic methods. In addition, it is necessary for an SHM system to distinguish between signal changes resulting from damage or changing environmental and operating conditions. The present work presents a new approach for the in-situ assessment of wind turbine blades via embedding radar networks in the frequency band from 58 to 63.5 GHz. Therefore, 40 FMCW (frequency-modulated continuous wave) radar sensors have been embedded into a wind turbine blade during manufacturing. This contribution provides additional information related to the hardware design of the sensor nodes, its preliminary testing and the specific implementation of the radar network during a fullscale fatigue test of a 31m long wind turbine blade [1]. Damage indicators can be formulated relative to baseline conditions to see the development of fatigue damage over time. Reference: [1] Simon, J.; Kurin, T.; Moll, J.; Bagemiel, O.; Wedel, R.; Krause, S.; Lurz, F.; Nuber, A.; Issakov, V. & Krozer, V., Embedded Radar Networks for Damage Detection in Wind Turbine Blades: Validation in a Full-scale Fatigue Test, Structural Health Monitoring, 2023, https://doi.org/10.1177/14759217231152815
- Open Access
Trend Decomposition for Temperature Compensation in a Radar-Based Structural Health Monitoring System of Wind Turbine Blades
The compensation of temperature is critical in every structural health monitoring (SHM) system for achieving maximum damage detection performance. This paper analyses a novel approach based on seasonal trend decomposition to eliminate the temperature effect in a radar-based SHM system for wind turbine blades that operates in the frequency band from 58 to 63.5 GHz. While the original seasonal trend decomposition searches for the trend of a periodic signal in its entirety, the new method uses a moving average to determine trends for each point of a periodic signal. The points of the seasonal signal no longer need to have the same trend. Based on the determined trends, the measurement signal can be corrected by temperature effects, providing accurate damage detection results under changing temperature conditions. The performance of the trend decomposition is demonstrated with experimental data obtained during a full-scale fatigue test of a 31 m long wind turbine blade subjected to ambient temperature variations. For comparison, the well-known optimal baseline selection (OBS) approach is used, which is based on multiple baseline measurements at different temperature conditions. The use of metrics, such as the contrast in damage indicators, enables the performance assessment of both methods.
Open AccessTrend Decomposition for Temperature Compensation in a Radar-Based Structural Health Monitoring System of Wind Turbine Blades
The compensation of temperature is critical in every structural health monitoring (SHM) system for achieving maximum damage detection performance. This paper analyses a novel approach based on seasonal trend decomposition to eliminate the temperature effect in a radar-based SHM system for wind turbine blades that operates in the frequency band from 58 to 63.5 GHz. While the original seasonal trend decomposition searches for the trend of a periodic signal in its entirety, the new method uses a moving average to determine trends for each point of a periodic signal. The points of the seasonal signal no longer need to have the same trend. Based on the determined trends, the measurement signal can be corrected by temperature effects, providing accurate damage detection results under changing temperature conditions. The performance of the trend decomposition is demonstrated with experimental data obtained during a full-scale fatigue test of a 31 m long wind turbine blade subjected to ambient temperature variations. For comparison, the well-known optimal baseline selection (OBS) approach is used, which is based on multiple baseline measurements at different temperature conditions. The use of metrics, such as the contrast in damage indicators, enables the performance assessment of both methods.
- Open Access
- 20 March 2023
- Published by SAGE Publications in Structural Health Monitoring
- Vol. 22 (6) , 4252-4263
Embedded radar networks for damage detection in wind turbine blades: validation in a full-scale fatigue test
This paper presents the design and experimental realization of a cooperative radar network for structural health monitoring (SHM) of wind turbine blades. For this purpose, 40 FMCW (frequency-modulated continuous wave) radar sensors operating from 58 to 63.5 GHz have been installed in a 31-m-long blade during manufacturing. A subset of 10 sensors is material-embedded in the core material of the blade, and the remaining thirty sensors are placed inside the blade on an inner rotor blade surface. The sensors are distributed over the entire blade based on previous high-frequency electromagnetic simulations. A full-scale fatigue test has been performed under controlled laboratory conditions. In addition, holes have been drilled into the blade by hand to represent a well-defined and relatively small damage. During the experimental campaign, measurements from the complete radar network have been transferred to a base station through a wireless communication link. Finally, it was demonstrated that fatigue as well as artificial damage could be detected accurately using the proposed damage indicator (DI) approach.
- 20 March 2023
- Published by SAGE Publications in Structural Health Monitoring
- Vol. 22 (6) , 4252-4263
Open AccessEmbedded radar networks for damage detection in wind turbine blades: validation in a full-scale fatigue test
This paper presents the design and experimental realization of a cooperative radar network for structural health monitoring (SHM) of wind turbine blades. For this purpose, 40 FMCW (frequency-modulated continuous wave) radar sensors operating from 58 to 63.5 GHz have been installed in a 31-m-long blade during manufacturing. A subset of 10 sensors is material-embedded in the core material of the blade, and the remaining thirty sensors are placed inside the blade on an inner rotor blade surface. The sensors are distributed over the entire blade based on previous high-frequency electromagnetic simulations. A full-scale fatigue test has been performed under controlled laboratory conditions. In addition, holes have been drilled into the blade by hand to represent a well-defined and relatively small damage. During the experimental campaign, measurements from the complete radar network have been transferred to a base station through a wireless communication link. Finally, it was demonstrated that fatigue as well as artificial damage could be detected accurately using the proposed damage indicator (DI) approach.
- Open Access
- 1 January 2020
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research Letters
- Vol. 90, 61-67
TOWARDS EMBEDDED RADCOM-SENSORS IN WIND TURBINE BLADES: PRELIMINARY NUMERICAL AND EXPERIMENTAL STUDIES
This paper presents a numerical study on the application of radar and communication (RadCom) sensor nodes operating in the frequency band from 57-64 GHz. The sensor nodes are embedded in the laminate of wind turbine blades, enable a quality inspection directly after rotor blade manufacturing as well as a structural health monitoring (SHM) throughout the service life of the blade. Given by a lack of dielectric properties for typical rotor blade materials, we have performed experimental studies on material characterization including glass fibre composites, balsa wood, infusion glue, etc. This material database serves as input for wave propagation simulations in a full scale 3D rotor blade model. The analysis also includes a parametric study on path losses as well as an optimal sensor placement strategy.
- 1 January 2020
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research Letters
- Vol. 90, 61-67
Open AccessTOWARDS EMBEDDED RADCOM-SENSORS IN WIND TURBINE BLADES: PRELIMINARY NUMERICAL AND EXPERIMENTAL STUDIES
This paper presents a numerical study on the application of radar and communication (RadCom) sensor nodes operating in the frequency band from 57-64 GHz. The sensor nodes are embedded in the laminate of wind turbine blades, enable a quality inspection directly after rotor blade manufacturing as well as a structural health monitoring (SHM) throughout the service life of the blade. Given by a lack of dielectric properties for typical rotor blade materials, we have performed experimental studies on material characterization including glass fibre composites, balsa wood, infusion glue, etc. This material database serves as input for wave propagation simulations in a full scale 3D rotor blade model. The analysis also includes a parametric study on path losses as well as an optimal sensor placement strategy.