Lei Ren
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lei Ren has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Jichun Yang
School of Rare Earth Industry Inner Mongolia University of Science and Technology Baotou China
3 shared publications- Jichun Yang
School of Rare Earth Industry, Inner Mongolia University of Science and Technology, Baotou 014010, China
3 shared publications - Haitao Ling
School of Metallurgical Engineering, Anhui University of Technology, Ma’anshan, China
2 shared publications Jun Zhu
Baotou Iron and Steel (Group) Co., LTD, Baotou 014010, P.R. China
2 shared publications- Guangqian Feng
Shaanxi Changyu Aviation Assembly Co., Ltd., Xi’an 710016, China
1 shared publication - Jun Zhu
School of Materials and Metallurgy, Inner Mongolia University of Science and Technology (IMUST), Baotou 014010, China
1 shared publication
Latest Publications
- 7 March 2026
- Published by Wiley in Steel Research International
- Vol. 97 (9) , 4844-4861
Synergistic Regulation of Inclusion Characteristics by La–Ce Mixed Rare Earth and Its Impact on the Mechanical Properties of U71Mn Steel
This study investigates the synergistic effects of the O/S ratio and La–Ce mixed rare earths on the inclusion occurrence state and mechanical properties of U71Mn steel. Thermodynamic calculations based on the Wagner model and Factsage reveal the formation sequence and stability of rare‐earth inclusions, indicating that La exhibits higher activity than Ce and preferentially forms fine and stable (La, Ce) 2 O 2 S inclusions under low O/S conditions. When O/S ≤ 0.75 and the rare earth content ≥ 0.015%, MnS can be completely modified, and the inclusions transform from elongated or composite types into refined and spherical morphologies, significantly improving steel cleanliness. Microstructural observations show that rare earths promote grain refinement and reduce interfacial stress concentration. Mechanical tests demonstrate that rare earth modification increases hardness and reduces its fluctuation, enhances impact toughness by 22%–112%, and improves yield and tensile strengths by 7%–13% and 1%–8%, respectively. The friction coefficient decreases by 10%–40%, indicating improved wear resistance. These results confirm that regulating the O/S ratio and La/Ce proportion enables controlled inclusion evolution and comprehensive improvement of the strength, toughness, and wear performance of U71Mn steel.
- 7 March 2026
- Published by Wiley in Steel Research International
- Vol. 97 (9) , 4844-4861
Synergistic Regulation of Inclusion Characteristics by La–Ce Mixed Rare Earth and Its Impact on the Mechanical Properties of U71Mn Steel
This study investigates the synergistic effects of the O/S ratio and La–Ce mixed rare earths on the inclusion occurrence state and mechanical properties of U71Mn steel. Thermodynamic calculations based on the Wagner model and Factsage reveal the formation sequence and stability of rare‐earth inclusions, indicating that La exhibits higher activity than Ce and preferentially forms fine and stable (La, Ce) 2 O 2 S inclusions under low O/S conditions. When O/S ≤ 0.75 and the rare earth content ≥ 0.015%, MnS can be completely modified, and the inclusions transform from elongated or composite types into refined and spherical morphologies, significantly improving steel cleanliness. Microstructural observations show that rare earths promote grain refinement and reduce interfacial stress concentration. Mechanical tests demonstrate that rare earth modification increases hardness and reduces its fluctuation, enhances impact toughness by 22%–112%, and improves yield and tensile strengths by 7%–13% and 1%–8%, respectively. The friction coefficient decreases by 10%–40%, indicating improved wear resistance. These results confirm that regulating the O/S ratio and La/Ce proportion enables controlled inclusion evolution and comprehensive improvement of the strength, toughness, and wear performance of U71Mn steel.
- 7 March 2025
- Published by EDP Sciences in Metallurgical Research & Technology
- Vol. 122 (2) , 211
Kinetics of MnS Inclusions Generation in Steel - Nucleation, Growth and Maturation
In this research, a complete MnS growth model for nucleation, solidification growth, and maturation was developed to accurately predict the size of MnS in steel. Three cooling rates (0.5 K/s, 1.5 K/s, and 5 K/s) were applied to the model. And used high-temperature confocal experiments to ensure the samples were cooled at three different rates. The results show that the MnS sizes of the samples are 4.84 µm, 2.15 µm, and 1.43 µm, under three different cooling rates. The model calculations for the MnS sizes under three cooling rates were 5.24 µm, 3.02 µm, and 1.66 µm, respectively. The calculations were consistent with the experiments, validating the accuracy of the model. During the calculation process, it was discovered that the growth size of MnS is at the nm level during the nucleation area and maturation area. The size change of MnS in the solidification stage was in the µm level. Simultaneously, the impact of different cooling rates on the solidification microstructure of steel was observed through high-temperature confocal experiments. The results show that the microstructure of the samples were the same for three cooling rates. The organisational transformation process: L → L + γ → γ → γ → γ → γ → γ + P.
- 7 March 2025
- Published by EDP Sciences in Metallurgical Research & Technology
- Vol. 122 (2) , 211
Kinetics of MnS Inclusions Generation in Steel - Nucleation, Growth and Maturation
In this research, a complete MnS growth model for nucleation, solidification growth, and maturation was developed to accurately predict the size of MnS in steel. Three cooling rates (0.5 K/s, 1.5 K/s, and 5 K/s) were applied to the model. And used high-temperature confocal experiments to ensure the samples were cooled at three different rates. The results show that the MnS sizes of the samples are 4.84 µm, 2.15 µm, and 1.43 µm, under three different cooling rates. The model calculations for the MnS sizes under three cooling rates were 5.24 µm, 3.02 µm, and 1.66 µm, respectively. The calculations were consistent with the experiments, validating the accuracy of the model. During the calculation process, it was discovered that the growth size of MnS is at the nm level during the nucleation area and maturation area. The size change of MnS in the solidification stage was in the µm level. Simultaneously, the impact of different cooling rates on the solidification microstructure of steel was observed through high-temperature confocal experiments. The results show that the microstructure of the samples were the same for three cooling rates. The organisational transformation process: L → L + γ → γ → γ → γ → γ → γ + P.
- 24 January 2025
- Published by Springer Nature in Metallurgical and Materials Transactions B
- Vol. 56 (2) , 1494-1510
An Industrial Practice on the Effect of Deoxidation Process on Inclusions in U75V Heavy Rail Steel
- 24 January 2025
- Published by Springer Nature in Metallurgical and Materials Transactions B
- Vol. 56 (2) , 1494-1510
An Industrial Practice on the Effect of Deoxidation Process on Inclusions in U75V Heavy Rail Steel
- Open Access
- 15 April 2024
- Published by Iron and Steel Institute of Japan in ISIJ International
- Vol. 64 (6) , 1010-1018
Effect of Submerged Entry Nozzle Structure on Fluid Flow, Slag Entrainment, and Solidification Process in a Slab Continuous Casting Mold
The fluid flow and slag entrainment in a slab continuous casting mold were investigated by establishing a full-scale water model. Meanwhile, the heat transfer and solidification process of liquid steel in the mold were studied through numerical simulation. The effect of two different submerged entry nozzles (SENs) was compared and analyzed, named as original SEN and L1 SEN, respectively. The results indicate that the structure of the SEN has a significant influence on the fluid flow pattern and solidification process in the slab mold. For the original SEN, the liquid level in the mold fluctuated obviously and the slag phase was easily entrained into the mold. The percentage of ±3mm level fluctuation was 57.2-74.3%. By enlarging the exit size, the L1 SEN considerably reduced the jet velocity at the nozzle exit and subsequently decreased the surface velocity at the top surface. The level fluctuation and slag entrainment in the mold have been effectively controlled. The percentage of ±3mm level fluctuation was increased to 91.7-98.6%. Furthermore, under the condition of L1 SEN, the thickness of the solidifying shell at the mold outlet was increased from 13.5 mm to 16.4 mm, which was beneficial to decrease the risk of breakouts and quality problems.
- 15 April 2024
- Published by Iron and Steel Institute of Japan in ISIJ International
- Vol. 64 (6) , 1010-1018
Open AccessEffect of Submerged Entry Nozzle Structure on Fluid Flow, Slag Entrainment, and Solidification Process in a Slab Continuous Casting Mold
The fluid flow and slag entrainment in a slab continuous casting mold were investigated by establishing a full-scale water model. Meanwhile, the heat transfer and solidification process of liquid steel in the mold were studied through numerical simulation. The effect of two different submerged entry nozzles (SENs) was compared and analyzed, named as original SEN and L1 SEN, respectively. The results indicate that the structure of the SEN has a significant influence on the fluid flow pattern and solidification process in the slab mold. For the original SEN, the liquid level in the mold fluctuated obviously and the slag phase was easily entrained into the mold. The percentage of ±3mm level fluctuation was 57.2-74.3%. By enlarging the exit size, the L1 SEN considerably reduced the jet velocity at the nozzle exit and subsequently decreased the surface velocity at the top surface. The level fluctuation and slag entrainment in the mold have been effectively controlled. The percentage of ±3mm level fluctuation was increased to 91.7-98.6%. Furthermore, under the condition of L1 SEN, the thickness of the solidifying shell at the mold outlet was increased from 13.5 mm to 16.4 mm, which was beneficial to decrease the risk of breakouts and quality problems.
- Open Access
- 20 February 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (5) , 1718
Study on the Causes and Control Measures of Mg–Al Spinel Inclusions in U75V Heavy Rail Steel
U75V heavy rail steel production uses an aluminum-free deoxidation process; however, large particles of MgO–Al2O3 inclusions form in the steel, which has a great impact on product quality. In this paper, we try to explain how spinel inclusions, which affect the metallurgical quality of heavy rail steel, are produced by thermodynamic and experimental methods, and then determined measures for avoiding such inclusions. The formation mechanism of spinel inclusions in U75V heavy rail steel was determined through the analysis of nozzle clogging in the pouring process and typical inclusions in steel. The results show that there are two types of spinel inclusions in heavy rail steel: one is pure Mg–Al spinel inclusions and the other is Mg–Al spinel inclusions coated with calcium aluminate. The small, pure Mg–Al spinel inclusions were precipitated during the solidification of the molten steel, and the precipitation temperature was related to the composition of the molten steel. The large spinel inclusions were derived from clogging of the submersed nozzle. Mg–Al spinel inclusions coated with calcium aluminate were transformed from CaO–SiO2–Al2O3–MgO complex inclusions in the steel during cooling, and the formation temperature was related to the content of Al2O3 and MgO in the inclusions. The content of Al2O3 and MgO in the inclusions was the key to the formation of the Mg–Al spinel inclusions. Therefore, in order to control the production of spinel inclusions in steel, it is necessary to strictly control the content of impurity elements such as magnesium and aluminum in the alloy auxiliary materials, to reduce the secondary oxidation of liquid steel and to reduce the erosion of refractory materials.
- 20 February 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (5) , 1718
Open AccessStudy on the Causes and Control Measures of Mg–Al Spinel Inclusions in U75V Heavy Rail Steel
U75V heavy rail steel production uses an aluminum-free deoxidation process; however, large particles of MgO–Al2O3 inclusions form in the steel, which has a great impact on product quality. In this paper, we try to explain how spinel inclusions, which affect the metallurgical quality of heavy rail steel, are produced by thermodynamic and experimental methods, and then determined measures for avoiding such inclusions. The formation mechanism of spinel inclusions in U75V heavy rail steel was determined through the analysis of nozzle clogging in the pouring process and typical inclusions in steel. The results show that there are two types of spinel inclusions in heavy rail steel: one is pure Mg–Al spinel inclusions and the other is Mg–Al spinel inclusions coated with calcium aluminate. The small, pure Mg–Al spinel inclusions were precipitated during the solidification of the molten steel, and the precipitation temperature was related to the composition of the molten steel. The large spinel inclusions were derived from clogging of the submersed nozzle. Mg–Al spinel inclusions coated with calcium aluminate were transformed from CaO–SiO2–Al2O3–MgO complex inclusions in the steel during cooling, and the formation temperature was related to the content of Al2O3 and MgO in the inclusions. The content of Al2O3 and MgO in the inclusions was the key to the formation of the Mg–Al spinel inclusions. Therefore, in order to control the production of spinel inclusions in steel, it is necessary to strictly control the content of impurity elements such as magnesium and aluminum in the alloy auxiliary materials, to reduce the secondary oxidation of liquid steel and to reduce the erosion of refractory materials.
- Open Access
Study on Influence of Rare Earth Ce on Micro and Macro Properties of U75V Steel
Non-metallic inclusions in steel have great influence on the continuity of the steel matrix and the mechanical properties of steel. The precipitation sequence of Ce inclusions in molten steel is predicted by thermodynamic calculations. The results show that Ce content will affect the precipitation sequence of rare earth inclusions in molten steel, and the formation of CeO2, Ce2O3 and CeAlO3 will be inhibited with the increase in Ce content. Our laboratory smelted the test steel without rare earth additive and the test steel with rare earth Ce additive (0.0008%, 0.0013%, 0.0032%, 0.0042%). It was found that the MnS inclusions and inclusions containing Al, Ca, Mg and Si oxides or sulfides in the steel after rare earth addition were modified into complex inclusions containing CeAlO3 and Ce2O2S. The size of inclusion in steel was reduced and the aspect ratio of inclusion was improved. The addition of Ce also improved the grain size of U75V steel and significantly refined the pearlite lamellar spacing. After mechanical property testing of the test steel, it was found that when Ce is increased within 0.0042%, the tensile and impact properties of U75V steel are also improved.
Open AccessStudy on Influence of Rare Earth Ce on Micro and Macro Properties of U75V Steel
Non-metallic inclusions in steel have great influence on the continuity of the steel matrix and the mechanical properties of steel. The precipitation sequence of Ce inclusions in molten steel is predicted by thermodynamic calculations. The results show that Ce content will affect the precipitation sequence of rare earth inclusions in molten steel, and the formation of CeO2, Ce2O3 and CeAlO3 will be inhibited with the increase in Ce content. Our laboratory smelted the test steel without rare earth additive and the test steel with rare earth Ce additive (0.0008%, 0.0013%, 0.0032%, 0.0042%). It was found that the MnS inclusions and inclusions containing Al, Ca, Mg and Si oxides or sulfides in the steel after rare earth addition were modified into complex inclusions containing CeAlO3 and Ce2O2S. The size of inclusion in steel was reduced and the aspect ratio of inclusion was improved. The addition of Ce also improved the grain size of U75V steel and significantly refined the pearlite lamellar spacing. After mechanical property testing of the test steel, it was found that when Ce is increased within 0.0042%, the tensile and impact properties of U75V steel are also improved.
- Open Access
Study on Multiphase Flow in a Wide-Width Continuous Casting Mold
The multiphase flow in the mold has a significant impact on the surface quality of the slab. In this paper, the multiphase flow in the mold is studied by establishing a one-quarter scale water mold, with the aid of a high-speed camera and particle image velocimetry (PIV). The oil phase will make the liquid surface velocity around the nozzle smaller. The greater the viscosity of the oil, the greater the critical water model casting speed and the shallower the critical immersion depth of submerged entry nozzle (SEN). Blowing will enhance the turbulence of the flow field in the mold and have a suppressing effect on the surface velocity. However, the vertical velocity of the narrow surface does not change significantly. The randomness of the bubble entering the mold from the nozzle can easily cause asymmetry of the instantaneous flow. The number of bubbles with a diameter less than 1 mm increase with the increase in gas flow rate. The larger the bubble size, the more buoyant around the nozzle when it escapes. The larger the diameter of bubble, the closer the vortex center of the upper circulation is to the nozzle and the closer the center of the lower circulation is to the narrow surface.
Open AccessStudy on Multiphase Flow in a Wide-Width Continuous Casting Mold
The multiphase flow in the mold has a significant impact on the surface quality of the slab. In this paper, the multiphase flow in the mold is studied by establishing a one-quarter scale water mold, with the aid of a high-speed camera and particle image velocimetry (PIV). The oil phase will make the liquid surface velocity around the nozzle smaller. The greater the viscosity of the oil, the greater the critical water model casting speed and the shallower the critical immersion depth of submerged entry nozzle (SEN). Blowing will enhance the turbulence of the flow field in the mold and have a suppressing effect on the surface velocity. However, the vertical velocity of the narrow surface does not change significantly. The randomness of the bubble entering the mold from the nozzle can easily cause asymmetry of the instantaneous flow. The number of bubbles with a diameter less than 1 mm increase with the increase in gas flow rate. The larger the bubble size, the more buoyant around the nozzle when it escapes. The larger the diameter of bubble, the closer the vortex center of the upper circulation is to the nozzle and the closer the center of the lower circulation is to the narrow surface.