Jun Zhu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Jun Zhu has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Jichun Yang
School of Rare Earth Industry, Inner Mongolia University of Science and Technology, Baotou 014010, China
1 shared publication - Lei Ren
School of Rare Earth Industry Inner Mongolia University of Science and Technology Baotou China
1 shared publication
Latest Publications
- Open Access
- 20 February 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (5) , 1718
Study on the Causes and Control Measures of Mg–Al Spinel Inclusions in U75V Heavy Rail Steel
U75V heavy rail steel production uses an aluminum-free deoxidation process; however, large particles of MgO–Al2O3 inclusions form in the steel, which has a great impact on product quality. In this paper, we try to explain how spinel inclusions, which affect the metallurgical quality of heavy rail steel, are produced by thermodynamic and experimental methods, and then determined measures for avoiding such inclusions. The formation mechanism of spinel inclusions in U75V heavy rail steel was determined through the analysis of nozzle clogging in the pouring process and typical inclusions in steel. The results show that there are two types of spinel inclusions in heavy rail steel: one is pure Mg–Al spinel inclusions and the other is Mg–Al spinel inclusions coated with calcium aluminate. The small, pure Mg–Al spinel inclusions were precipitated during the solidification of the molten steel, and the precipitation temperature was related to the composition of the molten steel. The large spinel inclusions were derived from clogging of the submersed nozzle. Mg–Al spinel inclusions coated with calcium aluminate were transformed from CaO–SiO2–Al2O3–MgO complex inclusions in the steel during cooling, and the formation temperature was related to the content of Al2O3 and MgO in the inclusions. The content of Al2O3 and MgO in the inclusions was the key to the formation of the Mg–Al spinel inclusions. Therefore, in order to control the production of spinel inclusions in steel, it is necessary to strictly control the content of impurity elements such as magnesium and aluminum in the alloy auxiliary materials, to reduce the secondary oxidation of liquid steel and to reduce the erosion of refractory materials.
- 20 February 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (5) , 1718
Open AccessStudy on the Causes and Control Measures of Mg–Al Spinel Inclusions in U75V Heavy Rail Steel
U75V heavy rail steel production uses an aluminum-free deoxidation process; however, large particles of MgO–Al2O3 inclusions form in the steel, which has a great impact on product quality. In this paper, we try to explain how spinel inclusions, which affect the metallurgical quality of heavy rail steel, are produced by thermodynamic and experimental methods, and then determined measures for avoiding such inclusions. The formation mechanism of spinel inclusions in U75V heavy rail steel was determined through the analysis of nozzle clogging in the pouring process and typical inclusions in steel. The results show that there are two types of spinel inclusions in heavy rail steel: one is pure Mg–Al spinel inclusions and the other is Mg–Al spinel inclusions coated with calcium aluminate. The small, pure Mg–Al spinel inclusions were precipitated during the solidification of the molten steel, and the precipitation temperature was related to the composition of the molten steel. The large spinel inclusions were derived from clogging of the submersed nozzle. Mg–Al spinel inclusions coated with calcium aluminate were transformed from CaO–SiO2–Al2O3–MgO complex inclusions in the steel during cooling, and the formation temperature was related to the content of Al2O3 and MgO in the inclusions. The content of Al2O3 and MgO in the inclusions was the key to the formation of the Mg–Al spinel inclusions. Therefore, in order to control the production of spinel inclusions in steel, it is necessary to strictly control the content of impurity elements such as magnesium and aluminum in the alloy auxiliary materials, to reduce the secondary oxidation of liquid steel and to reduce the erosion of refractory materials.