CNCarmen Nejneru

Carmen Nejneru

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Carmen Nejneru has a total of 7 co-authors. Here are the top co-authors by number of shared publications:

  • Diana-Petronela Burduhos-Nergis

    Department of Materials Engineering and Industrial Safety, Faculty of Materials Science and Engineering, Gheorghe Asachi Technical University of Iasi, 700050 Iasi, Romania

    3 shared publications
  • Mihai Axinte

    Faculty of Materials Science, “Gheorghe Asachi” Technical University of Iași, Blvd. Dimitrie Mangeron 71A, 700050 Iasi, Romania

    3 shared publications
  • Costica Bejinariu

    Faculty of Materials Science and Engineering, “Gheorghe Asachi” Technical University of Iasi, 41 Dimitrie Mangeron Blvd., 700050 Iasi, Romania

    2 shared publications
  • Manuela Cristina Perju

    Department of Technologies and Equipments for Materials Processing, Faculty of Materials Science and Engineering, “Gheorghe Asachi” Technical University of Iași, 700050 Iasi, Romania

    2 shared publications
  • Elena-Luiza Epure

    “Gheorghe Asachi” Technical University of Iassy, “Cristofor Simionescu” Faculty of Chemical Engineering and Environmental Protection, 700050 Iasi, Prof. Dr. docent D. Mangeron Blvd., Romania

    1 shared publication
  • Nicanor Cimpoesu

    Faculty of Materials Science and Engineering, “Gheorghe Asachi” Technical University of Iasi, 41 Dimitrie Mangeron Blvd., 700050 Iasi, Romania

    1 shared publication

Latest Publications

  • Open Access

    Analysis of Physicochemical Properties of W1.8507 Steel Parts with Sharp Edges, Thermochemically Treated by Plasma Nitriding with and without Polarized Screens

    by Mihai Axinte, Petrica Vizureanu, Nicanor Cimpoesu, Carmen Nejneru, Diana-Petronela Burduhos-Nergis, Elena-Luiza Epure

    The plasma nitriding edge effect phenomenon is characteristic of parts with sharp edges. The intersection for the discharge of negative light of the two adjacent faces causes the apparition of this effect. In some cases, this effect causes disturbance to the general process. In this work, a sample with different angles of 30°, 60°, and 90° was analyzed. The sample was subjected to ion nitriding with and without the cathode grid to highlight the reduction of the edge effect on the non-uniformity appearing on the edges and corners of the parts. The effect of the active screen was also analyzed by hardness measurements in the area of the nitride edges and by SEM and EDX analyses in the mentioned areas. Additionally, the influence of active screens was studied by nanoindentation and scratch tests and by measuring the contact angle of coolants and liquid lubricants on the nitride surfaces with both methods.


  • Open Access

    Analysis of the Physical-Mechanical Properties of the Zinc Phosphate Layer Deposited on a Nodular Cast Iron Substrate

    by Carmen Nejneru, Diana-Petronela Burduhos-Nergis, Mihai Axinte, Manuela Cristina Perju, Costica Bejinariu

    The rotors of submersible wastewater pumps, generally made of nodular graphite cast iron, are subjected to complex processes of corrosive erosion during operation. To improve the characteristics of erosion resistance by impact with solid particles in the corrosive environment of wastewater, cast iron was subjected to a chemical phosphating treatment. In the paper, the scratch test behaviour of nodular cast iron and phosphate nodular cast iron is analysed comparatively, studying the behaviour of the deposited layer and its adhesion to the substrate. The nanoindentation characteristics of nodular cast iron and phosphate nodular cast iron were also studied. It was observed that the deposited layer is not compact, but when pressed, it does not crack and does not detach from the substrate; it is impregnated in the substrate in the metal matrix, but not on the area with carbon nodules. The SEM micrographs show that the deposited phosphate layer is relatively porous and can change the behaviour of the liquid flow moving on the surface of the rotor due to its hydrophilic behaviour; this also allows the formation of a boundary layer that adheres to the surface of the rotor and protects it from the impacts of microparticles driven by the liquid stream.


  • Open Access

    Corrosion Behaviour of Nodular Cast Iron Used for Rotor Manufacturing in Different Wastewaters

    by Carmen Nejneru, Diana-Petronela Burduhos-Nergis, Mihai Axinte, Manuela Cristina Perju, Costica Bejinariu

    Submersible drainage sump pumps work in a highly corrosive environment, forming films with corrosive reaction products on the surface. Pump rotors are high-demand parts, so they are made of quality materials with good wear and corrosion resistance properties such as nodular graphite cast iron. This paper analyses the corrosion behaviour of cast iron used in the manufacture of rotors in three types of wastewaters, with variable pH. Nodular graphite cast iron samples were immersed in wastewater for 30, 60, and 90 days and tested by linear polarisation and electrochemical impedance spectroscopy (EIS). Also, the layers of reaction products formed on the surface of the material were analysed by SEM and EDS. The results showed that nodular cast-iron immersed in wastewater with acidic pH showed intense corrosion, the oxide layer formed on its surface is unstable. Also, the final structure of the product layer is that of a tri-layer with cations and anions absorbed from the corrosion media: the double-electric layer directly connected to the metal surface, an internal layer consisting of ferrous compounds and ferric compounds that control the diffusion of oxygen, an outer layer, and a compact crust of ferric compounds. The change in the pH of the wastewater has a major influence on the corrosion rate of the cast iron, which increases from 356.4 µm/year in DWW-1 (6.5 pH) to 1440 µm/year in DWW-2 (3 pH) and 1743 µm/year DWWW-3 (11 pH) respectively. As can be seen, the experimental study covers the problem of the corrosion behaviour of the pump rotor in various types of wastewaters this aspect is particularly important for the good use of wastewater pumps and to predict possible deviations for the operation of the equipment within the treatment plants.