VBVladyslava Baidala

Vladyslava Baidala

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Vladyslava Baidala has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • IMPROVEMENT OF SOLDER FOR JOINING DIFFERENT MATERIALS

    by U.A. Murzakhmetova, D.B. Hlushkova, Yu.I. Sychev, V.M. Volchuk, V.YU. Baidala

    The object of the study was diffusion-hardening gallium solders and other composite components. The market is experiencing an active growth in demand for low-temperature assembly technologies, especially in the field of IoT, wearables, and microsensors. The growing interest in low-temperature solders is due to the fact that they have a very low melting point (≈ 29.8 °C), which makes them promising for heat-sensitive electronic components, flexible electronics, 3D assembly without high heating. However, there are problems with their use that need to be solved: gallium corrosion to many metals, surface oxidation leading to poor wettability, slow curing at room temperatures. An experimental study of the phase formation during the interaction of Fe, Ni and iron-nickel alloys 36Н and 50Н with liquid gallium and tin was conducted. During the research, it was found that the intermetallics that are formed do not always grow according to a parabolic dependence in the coordinates: the thickness of the diffusion layer and the contact time. After calculating the reactive diffusion parameters, it was found that the effective reactive diffusion coefficients during gallium contact in the Fe-Ga, Ni-Ga systems are higher than in the Fe-Sn, Ni-Sn systems. It was found that during the interaction of iron-nickel alloys with liquid gallium, the rate of formation of new phases can be regulated. Iron-nickel alloys with a high nickel content in gallium solder pastes can be used both as solidification accelerators and as stabilizers. The results obtained allow us to state that functional solders are one of the directions of modern microelectronics.

  • Improving the quality of wheeled vehicle stability assessment using constraint theory

    by Olexandr Polyanskyi, Kharkiv National Automobile and Highway University, Yevhen Dubinin, Andrii Korobko, Vladyslava Baidala

    Oleksandr Polianskyi, Professor, Doctor in Technics (Doctor of Technic Sciences), Kharkiv National Automobile and Higway University, Kharkiv, Ukraine, e-mail:khadi.pas@gmail.com Yevhen Dubinin, Professor, Doctor in Technics (Doctor of Technic Sciences), Kharkiv National Automobile and Higway University, Kharkiv, Ukraine, e-mail:dubinin-rmn@ukr.net, ORCID ID: 0000-0002-6176-7358 А.І. Коробко, Associate Professor, Doctor in Technics (Doctor of Technic Sciences), Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, e-mail: ak82andrey@gmail.com, ORCID ID: 0000-0001-7817-9336 В.Ю. Байдала, assistent, Kharkiv National Automobile and Highway University, Kharkiv, Ukraine, e-mail: vlada.baidala@gmail.com, ORCID ID: 0000-0001-8836-6784 The article considers the problem of assessing the stability of wheeled vehicles, which is an important characteristic that affects traffic safety and the economic performance of wheeled vehicles. The paper analyzes existing decision-making algorithms using the theory of constraints in assessing the stability of wheeled vehicles, considering five types of logic trees and establishing rules for their application to analyze the dynamic stability of vehicles. It was found that these algorithms have limited accuracy due to the lack of consideration of all factors that affect the stability of wheeled vehicles, or cannot take these factors into account with sufficient accuracy. Based on this, rules for using logical trees for a more accurate study of the stability of wheeled vehicles have been developed, which allow taking into account more factors that affect the stability of wheeled vehicles with greater accuracy. Using the solutions obtained in this work, it is possible to significantly expand the scope of measurements, allowing for a more objective analysis of vehicle parameters in various operating conditions. A study was conducted to evaluate the accuracy of the developed rules using various data sets, which included information on the parameters of wheeled vehicles and the results of dynamic stability tests. The results of the study showed that the developed rules can significantly improve the accuracy of assessing the stability of wheeled vehicles. Recommendations for improving the quality of tests for the dynamic stability of wheeled vehicles have been developed, which relate to the choice of test parameters and data processing methods. It is emphasized that the use of the theory of constraints can significantly improve the quality of tests for the dynamic stability of wheeled vehicles by providing appropriate approaches and methodologies to improve this process. The research results presented in this article are important for improving traffic safety and economic efficiency of wheeled vehicles.


  • Open Access

    IMPROVEMENT OF THE METHOD OF TESTING THE DYNAMIC PROPERTIES OF WHEELED MACHINES WITH THE USE OF ARTIFICIAL INTELLIGENCE

    by Andrii Molodan, Yevhen Dubinin, Dmytro Klets, Oleksandr Polyansky, Andriy Korobko, Vladyslava Baidala, Maksym Krasnokutsky, Євген Дубінін, Дмитро Клец, Владислава Байдала, et al.

    The method of testing vehicles for dynamic position stability has been improved, which makes it possible to assesstheir lateral stability when driving on irregularities. The dynamic stability coefficient is proposed for use as an assessmentcriterion. The application of the developed method allows to obtain an assessment of stability in real time during theoperation of transport means.The structural scheme has been developed to ensure the reliability of the operation of wheeled vehicle, based onreducing the influence of the driver's qualifications as an element of the "driver-vehicle-road conditions" system on itsposition stability, taking into account the results of monitoring the technical condition.To conduct experiments and evaluate the results, the mobile registration and measurement complex (MRMC) wasused to assess and improve the safety of exploitation of wheeled vehicles, taking into account modern means andapproaches. A single-board computer Raspberry Pi version 3B + serves as a platform for the mobile registration andmeasurement complex. The architecture of MRMC is modular; it supports the installation of additional inertial sensors,photo and video fixation devices, GPS, as well as devices compatible with USB. Operating system – Raspbian based onDebian distribution (GNU / Linux).To further automate the process of controlling a wheeled vehicle, the promising scheme for the operation of theregistration and measuring complex with elements of artificial intelligence was developed, which allows, without theparticipation of the driver, to carry out the necessary actions to control it and ensure, including operational safety.The results can be used to assess the suitability and performance of wheeled vehicles.

  • Open Access

    Parametric synthesis of car suspension

    by Evgeniy Aleksandrov, Vladyslav Shapovalenko, Vladyslava Baidala

    Problem. When driving a vehicle with comfortable suspension settings, there is a high probability that such adjustments may, firstly, cause discomfort to the driver and passengers, and secondly, when cornering, there is a high probability that the vehicle will overturn. A stiffer suspension leads to discomfort when driving on bumps. To choose the optimal parameters of the car's suspension, it is necessary to take into account the various parameters of the car's suspension, its settings and the features of the road surface. Goal. Solving the problem of choosing the values of the varied parameters of the car suspension - the coefficients of stiffness of the elastic elements and the average values of the damping coefficients of the shock absorbers, which provide a comfortable state of the driver and passengers while driving. Methodology. The approaches adopted in the work to solve the problems are based on the algorithmic method of parametric synthesis of dynamic systems. Results. The obtained maximum values of generalized coordinates, speeds and accelerations of the sprung part of the car body, as well as the minimum values of functionalities, with the help of ratios are possible to estimate the values of weights of additive functionality based on MathCAD software package. With the help of the algorithmic method of solving the problem of parametric synthesis of a dynamic system it is possible to it automate. Analysis of the process with the specified coefficients allows to detect high efficiency of damping of vertical oscillations of the under-sprung part of the car body. The amplitude of the linear displacement of the center of mass of the body does not exceed 0,02 m, and the amplitude of the generalized veloc-ity of the centre of mass of the sprung part of the housing does not exceed 0,08 m/s-1. Originality. The obtained parameters allow to minimize the time for selection of average values when designing the vehicle suspension. Practical value. The results can be recommended when studying the design features of vehicle suspensions. Thanks to the optimization of the MATLAB software package, modeling with different suspension parameters is possible.

  • DETERMINATION OF THE PARTIAL ACCELERATION OF A TWO–AXLE VEHICLE WITH ALL–HANDLED WHEELS

    by Dmytro Klets, Yevhen Dubinin, Yevhen Pelypenko, Vladislava Baidala, Дмитро Клец, Євген Дубінін, Євген Пелипенко

    The proposed method allows evaluating an automobile handling with or without accounting withdrawal, with various types of drive wheels and various steering wheels using partial acceleration. Determination of lateral and tangential reactions on automobile tire while turning in view tire slip allows more accurate evaluating of automobile maneuverability, stability and handling. Determination of vehicle total and partial angular accelerations during its driving into rotation with and without accounting withdrawal allows developing an vehicles handling improving algorithm with different tire types. Using of different ways in vehicle managing is complicating associated with machine design and control process by machine handling characteristics changing during applying the locking devices. The equations of front-wheel drive vehicles and all-wheel drive vehicles rotational motion when driving on curves without removal are the same. Appearance of new ways to perform maneuvers such as turning movement with all the drive wheels (4WS), requires researching of movement trajectory, stability and handling of machines during specified maneuvering. The partial acceleration method allows the assessment of the controllability of vehicles with different types of drives (front-, rear - and all-wheel drive) and with different steerable wheels. The determination of lateral reactions on the wheels of the vehicle when turning allows for a more accurate assessment of the agility, stability and handling of vehicles


  • IMPROVEMENT OF THE WHEELED VEHICLES DYNAMIC TESTING METHOD

    by Yevhen Dubinin, Dmytro Klets, Oleksandr Polyansky, Andriy Korobko, Vladyslava Baidala

    The method of testing vehicles for dynamic position stability has been improved, which makes it possible to assess their lateral stability when driving on irregularities. The dynamic stability coefficient is proposed for use as an assessment criterion. The application of the developed method allows to obtain an assessment of stability in real time during the operation of transport means. The structural scheme has been developed to ensure the reliability of the operation of wheeled vehicle, based on reducing the influence of the driver's qualifications as an element of the "driver-vehicle-road conditions" system on its position stability, taking into account the results of monitoring the technical condition. To conduct experiments and evaluate the results, the mobile registration and measurement complex (MRMC) was used to assess and improve the safety of exploitation of wheeled vehicles, taking into account modern means and approaches. A single-board computer Raspberry Pi version 3B + serves as a platform for the mobile registration and measurement complex. The architecture of MRMC is modular; it supports the installation of additional inertial sensors, photo and video fixation devices, GPS, as well as devices compatible with USB. Operating system – Raspbian based on Debian distribution (GNU / Linux). To further automate the process of controlling a wheeled vehicle, the promising scheme for the operation of the registration and measuring complex with elements of artificial intelligence was developed, which allows, without the participation of the driver, to carry out the necessary actions to control it and ensure, including operational safety. The results can be used to assess the suitability and performance of wheeled vehicles.