Mario Krattenmacher
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Mario Krattenmacher has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Markus Müller
Chair for Electron Devices and Integrated Circuits, Technical University Dresden, Dresden, Germany
3 shared publications - Michael Schröter
Chair for Electron Devices and Integrated Circuits, Technical University Dresden, Dresden, Germany
2 shared publications Sophia Falk
Chair for Electron Devices and Integrated Circuits, Dresden University of Technology (TU Dresden), Dresden, Germany
2 shared publications- Xiaodi Jin
Chair for Electron Devices and Integrated Circuits, Dresden University of Technology (TU Dresden), Dresden, Germany
2 shared publications - Bernd Heinemann
Leibniz-Institut fr innovative Mikroelektronik (IHP), Frankfurt (Oder), Germany
1 shared publication - Christoph Weimer
Department of Electrical and Computer Engineering, Chair for Electron Devices and Integrated Circuits, Technische Universitt Dresden, Dresden, Germany
1 shared publication
Latest Publications
- 16 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Device modeling tools and their application to SiGe HBT development
The enabling role of device simulation (TCAD) and compact modeling for the structural optimization of SiGe HBTs during process development is discussed. It is shown that employing a Boltzmann and an augmented drift-diffusion solver in combination with a physics-based compact model and geometry scalable parameter extraction can successfully support process development. As application examples, two particular use scenarios are discussed along with practical examples, and corresponding results are presented.
- 16 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Device modeling tools and their application to SiGe HBT development
The enabling role of device simulation (TCAD) and compact modeling for the structural optimization of SiGe HBTs during process development is discussed. It is shown that employing a Boltzmann and an augmented drift-diffusion solver in combination with a physics-based compact model and geometry scalable parameter extraction can successfully support process development. As application examples, two particular use scenarios are discussed along with practical examples, and corresponding results are presented.
- 12 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (8) , 4064-4074
Methods for Extracting the Temperature- and Power-Dependent Thermal Resistance for SiGe and III-V HBTs From DC Measurements: A Review and Comparison Across Technologies
Many different methods have been proposed in the literature for the extraction of the thermal resistance of heterojunction bipolar transistors (HBTs). This review presents a detailed evaluation and discussion of several widely used methods. Special emphasis is put on a generalized analysis of the underlying assumptions, suitable operating point range, and necessary measurement effort of each method. The accuracy of each method is determined by applying it to data based on circuit simulations of advanced SiGe and III-V HBT technologies. Experimental data from those technologies are used to highlight practical issues. A guideline for the selection of the most suitable method in practice is also given.
- 12 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (8) , 4064-4074
Methods for Extracting the Temperature- and Power-Dependent Thermal Resistance for SiGe and III-V HBTs From DC Measurements: A Review and Comparison Across Technologies
Many different methods have been proposed in the literature for the extraction of the thermal resistance of heterojunction bipolar transistors (HBTs). This review presents a detailed evaluation and discussion of several widely used methods. Special emphasis is put on a generalized analysis of the underlying assumptions, suitable operating point range, and necessary measurement effort of each method. The accuracy of each method is determined by applying it to data based on circuit simulations of advanced SiGe and III-V HBT technologies. Experimental data from those technologies are used to highlight practical issues. A guideline for the selection of the most suitable method in practice is also given.
- Open Access
- 4 July 2022
- Published by The Open Journal in Journal of Open Source Software
- Vol. 7 (75) , 4298
DMT-core: A Python Toolkit for Semiconductor Device Engineers
- 4 July 2022
- Published by The Open Journal in Journal of Open Source Software
- Vol. 7 (75) , 4298
Open AccessDMT-core: A Python Toolkit for Semiconductor Device Engineers
- 1 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 55 (00189200) , 1-11
3.2-mW Ultra-Low-Power 173-207-GHz Amplifier With 130-nm SiGe HBTs Operating in Saturation
This article presents an ultra-low-power silicon germanium heterojunction bipolar transistor (SiGe HBT) amplifier operating at 200 GHz. The amplifier consists of three cascaded gain-cell stages and was implemented in an experimental 130-nm SiGe HBT technology with peak f T /f max of 460/600 GHz. In order to achieve the demonstrated extremely low dc power dissipation, the circuit was designed with transistors operating at forward-biased base-collector junction voltage (V BC ). With 1.3-V supply voltage (V BC ≈ 0.2 V), this amplifier exhibits a peak gain of 23.5 dB at 180 and 205 GHz with 34-GHz 3-dB bandwidth (BW) from 173 to 207 GHz, consuming 3.2-mW static dc power. Even with a supply voltage of 0.7 V (V BC ≈ 0.5 V), this amplifier still operates with a peak gain of 18.3 dB at 175 GHz, dissipating an extremely low dc power of 1.73 mW. Compared with the previously reported low-power amplifiers operating around 200 GHz, this article achieves the highest linear gain relative to the dc power consumption with an improvement factor of ten, as well as highly competitive performances in terms of noise figure and 3-dB BW.
- 1 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 55 (00189200) , 1-11
3.2-mW Ultra-Low-Power 173-207-GHz Amplifier With 130-nm SiGe HBTs Operating in Saturation
This article presents an ultra-low-power silicon germanium heterojunction bipolar transistor (SiGe HBT) amplifier operating at 200 GHz. The amplifier consists of three cascaded gain-cell stages and was implemented in an experimental 130-nm SiGe HBT technology with peak f T /f max of 460/600 GHz. In order to achieve the demonstrated extremely low dc power dissipation, the circuit was designed with transistors operating at forward-biased base-collector junction voltage (V BC ). With 1.3-V supply voltage (V BC ≈ 0.2 V), this amplifier exhibits a peak gain of 23.5 dB at 180 and 205 GHz with 34-GHz 3-dB bandwidth (BW) from 173 to 207 GHz, consuming 3.2-mW static dc power. Even with a supply voltage of 0.7 V (V BC ≈ 0.5 V), this amplifier still operates with a peak gain of 18.3 dB at 175 GHz, dissipating an extremely low dc power of 1.73 mW. Compared with the previously reported low-power amplifiers operating around 200 GHz, this article achieves the highest linear gain relative to the dc power consumption with an improvement factor of ten, as well as highly competitive performances in terms of noise figure and 3-dB BW.