Yufeng Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yufeng Wang has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
Haobin Hu
College of Petroleum and Chemical Engineering, Longdong University, Qingyang, China
3 shared publications- Haobin Hu
College of Petroleum & Chemical Engineering Longdong University Qingyang China
3 shared publications - Chengyi Dai
School of Chemical Engineering, International Science & Technology Cooperation Base for Clean Utilization of Hydrocarbon Resources, Chemical Engineering Research Center of the Ministry of Education for Advanced Use Technology of Shanbei Energy, Collaborative Innovation Center for Development of Energy and Chemical Industry in Northern Shaanxi, Northwest University, Xi'an, 710069, China
2 shared publications Ke Ma
College of Chemical Engineering, Northwest University, Xi'an, Shaanxi, 710069, China
2 shared publicationsPenghui Zhang
Gansu Key Laboratory of Efficient Utilization of Oil and Gas Resources in Longdong, Qingyang, Gansu, 745000, China
2 shared publications- Zhi-Jun Li
Gansu Key Laboratory of Efficient Utilization of Oil and Gas Resources in Longdong, College of Petroleum and Chemical Engineering, Longdong University, Qingyang, Gansu, 745000, P. R. China
2 shared publications
Latest Publications
- 1 July 2026
- Published by Springer Nature in Journal of Coatings Technology and Research
- Vol. 23 (5) , 1-11
Hydroxy silicone oil-modified loess-based molecular sieve/chitosan composite films
- 1 July 2026
- Published by Springer Nature in Journal of Coatings Technology and Research
- Vol. 23 (5) , 1-11
Hydroxy silicone oil-modified loess-based molecular sieve/chitosan composite films
- 4 February 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 214
Efficient photocatalytic H2 evolution over sulfoselenide CuS0.5Se0.5/g-C3N4 S-scheme heterojunction
- 4 February 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 214
Efficient photocatalytic H2 evolution over sulfoselenide CuS0.5Se0.5/g-C3N4 S-scheme heterojunction
- Open Access
- 1 January 2025
- Published by Walter de Gruyter GmbH in Green Processing and Synthesis
- Vol. 14 (1)
Development of loess-derived P-type molecular sieve as a sustainable antibacterial agent
A loess-derived P-type molecular sieve was synthesized using loess in the northwest region of China as the raw material. It was directly synthesized through the hydrothermal crystallization method after activating the loess, and there was no need for additional silicon and aluminum sources. The performance of the loess-derived P-type molecular sieve was characterized by means of various techniques, and examining how the raw materials and reaction conditions influenced the product. The synthetic product served as a carrier and reacted with chitosan and potassium diformate to yield an antibacterial agent. This agent was then added to a culture medium containing bacillus subtilis to investigate its antibacterial effect. The results revealed that the synthesized product is identified as a P-type molecular sieve and has good adsorption properties. Its microsurface structure presented pineal-like spherical particles and its specific surface areas was up to 128.441 m 2 /g. Meanwhile, the synthetic antibacterial agent demonstrated better antibacterial and bactericidal effects and it has long-term release characteristics.
- 1 January 2025
- Published by Walter de Gruyter GmbH in Green Processing and Synthesis
- Vol. 14 (1)
Open AccessDevelopment of loess-derived P-type molecular sieve as a sustainable antibacterial agent
A loess-derived P-type molecular sieve was synthesized using loess in the northwest region of China as the raw material. It was directly synthesized through the hydrothermal crystallization method after activating the loess, and there was no need for additional silicon and aluminum sources. The performance of the loess-derived P-type molecular sieve was characterized by means of various techniques, and examining how the raw materials and reaction conditions influenced the product. The synthetic product served as a carrier and reacted with chitosan and potassium diformate to yield an antibacterial agent. This agent was then added to a culture medium containing bacillus subtilis to investigate its antibacterial effect. The results revealed that the synthesized product is identified as a P-type molecular sieve and has good adsorption properties. Its microsurface structure presented pineal-like spherical particles and its specific surface areas was up to 128.441 m 2 /g. Meanwhile, the synthetic antibacterial agent demonstrated better antibacterial and bactericidal effects and it has long-term release characteristics.
- 14 November 2024
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 10 (3) , 667-675
Effect of the presence of CO2 on the stability of the methanol-to-olefins reaction catalyzed by Zn/SAPO-34 zeolite
The methanol-to-olefins reaction is a viable and promising technological route to replace increasingly scarce petroleum resources. SAPO-34 zeolite is an ideal catalyst for the methanol-to-olefins reaction due to its suitable acidity and pore structure. However, a single zeolite catalyst has limited performance, and in this work, metal species were introduced on SAPO-34 molecular sieves to achieve higher low-carbon olefin selectivity through the modulation of acidity. However, since the introduction of metals promotes aromatic cycling, it allows the creation of carbonaceous precursors and reduces the catalyst lifetime. Therefore, the introduction of CO2 into the carrier gas inhibited the generation of carbonaceous precursors and thus prolonged the catalyst life. The presence of the metal species and their effects on SAPO-34's pores and structure were characterized by XPS, the change in acid amount was determined by NH3-TPD, and the adsorption strength of the catalyst for CO2 was determined by CO2-TPD, revealing the active sites of the catalyst. High low-carbon olefin selectivity and long catalyst life were also achieved, with low-carbon olefin selectivity of 88.0%.
- 14 November 2024
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 10 (3) , 667-675
Effect of the presence of CO2 on the stability of the methanol-to-olefins reaction catalyzed by Zn/SAPO-34 zeolite
The methanol-to-olefins reaction is a viable and promising technological route to replace increasingly scarce petroleum resources. SAPO-34 zeolite is an ideal catalyst for the methanol-to-olefins reaction due to its suitable acidity and pore structure. However, a single zeolite catalyst has limited performance, and in this work, metal species were introduced on SAPO-34 molecular sieves to achieve higher low-carbon olefin selectivity through the modulation of acidity. However, since the introduction of metals promotes aromatic cycling, it allows the creation of carbonaceous precursors and reduces the catalyst lifetime. Therefore, the introduction of CO2 into the carrier gas inhibited the generation of carbonaceous precursors and thus prolonged the catalyst life. The presence of the metal species and their effects on SAPO-34's pores and structure were characterized by XPS, the change in acid amount was determined by NH3-TPD, and the adsorption strength of the catalyst for CO2 was determined by CO2-TPD, revealing the active sites of the catalyst. High low-carbon olefin selectivity and long catalyst life were also achieved, with low-carbon olefin selectivity of 88.0%.
- 5 October 2023
- Published by Elsevier in Inorganica Chimica Acta
- Vol. 559
Synthesis of a loess-based 4A molecular sieve and its application performance in detergents
- 5 October 2023
- Published by Elsevier in Inorganica Chimica Acta
- Vol. 559
Synthesis of a loess-based 4A molecular sieve and its application performance in detergents
- 4 July 2022
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 7 (10) , 2152-2162
Effect of acid distribution and pore structure of ZSM-5 on catalytic performance
Zeolite with crystal intracrystalline pore structure with less acid on the outer surface.
- 4 July 2022
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 7 (10) , 2152-2162
Effect of acid distribution and pore structure of ZSM-5 on catalytic performance
Zeolite with crystal intracrystalline pore structure with less acid on the outer surface.