Oleksii Boichenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Oleksii Boichenko has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Yevgenii Khmel2 shared publications
- Yurii Gnusov
Kharkiv National University of Internal Affairs
2 shared publications - Yurii Onishchenko
Kharkiv National University of Internal Affairs
2 shared publications - A. Korolev
Державний науково-дослідний інститут випробувань і сертифікації озброєння та військової техніки, Чернігів, Україна
1 shared publication - Alexander Sotnikov
Ivan Kozhedub Kharkiv National Air Force University
1 shared publication - Dmytro Holovniak
State Scientific Research Institute of Armament and Military Equipment Testing and Certification
1 shared publication
Latest Publications
- Open Access
- 30 September 2026
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 3(13),p. 78-85
FEATURES OF ASSESSING THE FAIL-SAFE MOUNTAINEERING DEVICES ACCORDING TO THE RESULTS OF RESEARCH TESTS
The relevance of the study is determined by the need to ensure a high level of personnel safety during parachuteless insertion operations from Mi-8 military transport helicopters. One of the key factors affecting the safety of such operations is the reliability of special-purpose mountaineering equipment, primarily the failure-freeness of descent devices and suspension systems. A distinctive feature of these products is the limited volume of manufacturing and testing, which complicates the accumulation of failure statistics and restricts the applicability of conventional reliability assessment methods that require large amounts of operational data. The paper considers the peculiarities of planning and conducting research tests of newly developed descent devices and suspension systems intended for repeated use under cyclic loading conditions. The results of the tests are analyzed, demonstrating that the products maintained their operational capability and functional characteristics throughout the achieved service life. It was established that the absence of failures during the testing process indicates a high level of failure-freeness and compliance with the specified requirements under the investigated loading conditions. At the same time, it is shown that even in the complete absence of failures, the obtained results do not provide sufficient grounds for a statistically justified determination of the ultimate service life and durability of the products without the use of additional sources of information. The scientific novelty of the study lies in the substantiation of methodological provisions for assessing the failure-freeness of special-purpose mountaineering equipment under conditions of a limited number of tests and the absence of representative failure statistics. It is proposed that the results of research testing should be considered in combination with a priori information on analogous products, material degradation models, and expert assessments in order to improve the validity of reliability predictions. The practical significance of the work consists in the possibility of using the obtained results to improve test programs and methodologies, substantiate requirements for operational documentation, determine service-life indicators, and enhance the safety of military mountaineering systems. The proposed approaches can be applied during the development, testing, certification, and operation of new special-purpose equipment intended for parachuteless insertion of personnel.
- 30 September 2026
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Випробування та сертифікація
- No. 3(13),p. 78-85
Open AccessFEATURES OF ASSESSING THE FAIL-SAFE MOUNTAINEERING DEVICES ACCORDING TO THE RESULTS OF RESEARCH TESTS
The relevance of the study is determined by the need to ensure a high level of personnel safety during parachuteless insertion operations from Mi-8 military transport helicopters. One of the key factors affecting the safety of such operations is the reliability of special-purpose mountaineering equipment, primarily the failure-freeness of descent devices and suspension systems. A distinctive feature of these products is the limited volume of manufacturing and testing, which complicates the accumulation of failure statistics and restricts the applicability of conventional reliability assessment methods that require large amounts of operational data. The paper considers the peculiarities of planning and conducting research tests of newly developed descent devices and suspension systems intended for repeated use under cyclic loading conditions. The results of the tests are analyzed, demonstrating that the products maintained their operational capability and functional characteristics throughout the achieved service life. It was established that the absence of failures during the testing process indicates a high level of failure-freeness and compliance with the specified requirements under the investigated loading conditions. At the same time, it is shown that even in the complete absence of failures, the obtained results do not provide sufficient grounds for a statistically justified determination of the ultimate service life and durability of the products without the use of additional sources of information. The scientific novelty of the study lies in the substantiation of methodological provisions for assessing the failure-freeness of special-purpose mountaineering equipment under conditions of a limited number of tests and the absence of representative failure statistics. It is proposed that the results of research testing should be considered in combination with a priori information on analogous products, material degradation models, and expert assessments in order to improve the validity of reliability predictions. The practical significance of the work consists in the possibility of using the obtained results to improve test programs and methodologies, substantiate requirements for operational documentation, determine service-life indicators, and enhance the safety of military mountaineering systems. The proposed approaches can be applied during the development, testing, certification, and operation of new special-purpose equipment intended for parachuteless insertion of personnel.
- Open Access
- 28 June 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (9 (129)) , 60-69
Using the set of informative features of a binding object to construct a decision function by the system of technical vision when localizing mobile robots
The object of this study is the process of constructing a decision function by the optical-electronic system of technical vision under the conditions of the influence of obstacles on the current image, which is formed in the process of localization of a mobile robot. The paper reports the results of solving the problem of constructing a decision function when reducing the signal-to-noise ratio of the current image by using a set of informative features for the selection of the binding object, namely, brightness, contrast, and its area. The selection of the binding object is proposed to be carried out by choosing the appropriate values of the quantization thresholds of the current image for the selected informative features, taking into account the signal-to-noise ratio, which provides the necessary probability of object selection. The dependence of the object selection probability on the selected values of the quantization thresholds was established. The use of the results could enable the construction of a unimodal decision function when localizing mobile robots on imaging surfaces with weakly pronounced brightness and contrast characteristics of objects, as well as with their small geometric dimensions. By modeling, the probability of forming a decision function was estimated depending on the degree of noise of the current images. It is shown that the application of the proposed approach allows selection of objects with a probability ranging from 0.78 to 0.99 for the values of the signal-to-noise ratio of images formed by the technical vision system under real conditions. The method to construct a decision function under the influence of interference could be implemented in information processing algorithms used in optical-electronic technical vision systems for the navigation of unmanned aerial vehicles
- 28 June 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (9 (129)) , 60-69
Open AccessUsing the set of informative features of a binding object to construct a decision function by the system of technical vision when localizing mobile robots
The object of this study is the process of constructing a decision function by the optical-electronic system of technical vision under the conditions of the influence of obstacles on the current image, which is formed in the process of localization of a mobile robot. The paper reports the results of solving the problem of constructing a decision function when reducing the signal-to-noise ratio of the current image by using a set of informative features for the selection of the binding object, namely, brightness, contrast, and its area. The selection of the binding object is proposed to be carried out by choosing the appropriate values of the quantization thresholds of the current image for the selected informative features, taking into account the signal-to-noise ratio, which provides the necessary probability of object selection. The dependence of the object selection probability on the selected values of the quantization thresholds was established. The use of the results could enable the construction of a unimodal decision function when localizing mobile robots on imaging surfaces with weakly pronounced brightness and contrast characteristics of objects, as well as with their small geometric dimensions. By modeling, the probability of forming a decision function was estimated depending on the degree of noise of the current images. It is shown that the application of the proposed approach allows selection of objects with a probability ranging from 0.78 to 0.99 for the values of the signal-to-noise ratio of images formed by the technical vision system under real conditions. The method to construct a decision function under the influence of interference could be implemented in information processing algorithms used in optical-electronic technical vision systems for the navigation of unmanned aerial vehicles
- 1 April 2024
- Published by Technical University of Moldova in Problems of the Regional Energetics
- No. 2(62),p. 179-187
Application of Object Contrast for Forming Images Used in Technical Vision Systems for Navigation of Mobile Robots
The purpose of the article is to substantiate the feasibility of using object contrast as an informative feature for the formation of images used in technical vision systems. This goal is achieved by studying the dependence of the contrast of objects in images on the viewing geometry and determining the conditions under which the greatest similarity of the compared images is ensured. The solution to the first problem is based on the presentation of reference information about sighted objects, taking into account the navigation parameters of mobile robots. By modeling in the MATLAB software environment for typical viewing conditions, selective images were obtained using randomly selected fragments from Google Earth Pro, the distribution of contrast values and the cross-correlation function of the original and selective images. The influence of viewing angles on the distribution of contrasts and the formation of the decisive function was determined. The studies were performed for viewing angles of -60˚, -80˚ and -90˚ for altitudes in the range from 500 to 600 meters. The most significant result is a model of a set of reference images, taking into account the influence of navigation parameters on the contrast of objects, as well as experimentally established dependences of the distribution of contrasts for typical viewing conditions. The novelty of the work lies in the fact that the procedure for generating images and the decision function using the contrast of objects has been further developed. This will significantly increase the efficiency of selection of objects with insignificant brightness characteristics.
- 1 April 2024
- Published by Technical University of Moldova in Problems of the Regional Energetics
- No. 2(62),p. 179-187
Application of Object Contrast for Forming Images Used in Technical Vision Systems for Navigation of Mobile Robots
The purpose of the article is to substantiate the feasibility of using object contrast as an informative feature for the formation of images used in technical vision systems. This goal is achieved by studying the dependence of the contrast of objects in images on the viewing geometry and determining the conditions under which the greatest similarity of the compared images is ensured. The solution to the first problem is based on the presentation of reference information about sighted objects, taking into account the navigation parameters of mobile robots. By modeling in the MATLAB software environment for typical viewing conditions, selective images were obtained using randomly selected fragments from Google Earth Pro, the distribution of contrast values and the cross-correlation function of the original and selective images. The influence of viewing angles on the distribution of contrasts and the formation of the decisive function was determined. The studies were performed for viewing angles of -60˚, -80˚ and -90˚ for altitudes in the range from 500 to 600 meters. The most significant result is a model of a set of reference images, taking into account the influence of navigation parameters on the contrast of objects, as well as experimentally established dependences of the distribution of contrasts for typical viewing conditions. The novelty of the work lies in the fact that the procedure for generating images and the decision function using the contrast of objects has been further developed. This will significantly increase the efficiency of selection of objects with insignificant brightness characteristics.
- 1 November 2023
- Published by Technical University of Moldova in Problems of the Regional Energetics
- No. 4(60),p. 30-42
Segmentation of Images Used in Unmanned Aerial Vehicles Navigation Systems
The paper presents the results of the study of a two-stage procedure for selecting a reference object in the current image formed by a correlation-extreme system used for autonomous navigation of unmanned aerial vehicles. The aim of this paper is to theoretically evaluate the probability of selecting low-dimensional low-contrast objects in the segmented current image according to the proposed two-stage procedure. To achieve this goal, the problem of segmentation of images of the sighting surface and subsequent selection of the reference object in the presence of heterogeneous objects differing in brightness and area characteristics is solved. The most significant result is the justification of application of two-stage procedure of selection of the reference object in the current image by brightness and area parameters using the set thresholds. The significance of the obtained results consists in establishing the dependence of the probability of correct selection of the reference object on the noise level of the current images. It is shown that the probability of correct selection of the object in the image is a function of the threshold value and can be maximised by choosing its value. This approach allows to consider the influence of various factors leading to image noise on the quality of images formed by the navigation system. It is shown that when noise distorts more than 31% of the image pixels, the proposed two-stage procedure allows to ensure the selection of the reference object in the image with a probability not lower than 0.9.
- 1 November 2023
- Published by Technical University of Moldova in Problems of the Regional Energetics
- No. 4(60),p. 30-42
Segmentation of Images Used in Unmanned Aerial Vehicles Navigation Systems
The paper presents the results of the study of a two-stage procedure for selecting a reference object in the current image formed by a correlation-extreme system used for autonomous navigation of unmanned aerial vehicles. The aim of this paper is to theoretically evaluate the probability of selecting low-dimensional low-contrast objects in the segmented current image according to the proposed two-stage procedure. To achieve this goal, the problem of segmentation of images of the sighting surface and subsequent selection of the reference object in the presence of heterogeneous objects differing in brightness and area characteristics is solved. The most significant result is the justification of application of two-stage procedure of selection of the reference object in the current image by brightness and area parameters using the set thresholds. The significance of the obtained results consists in establishing the dependence of the probability of correct selection of the reference object on the noise level of the current images. It is shown that the probability of correct selection of the object in the image is a function of the threshold value and can be maximised by choosing its value. This approach allows to consider the influence of various factors leading to image noise on the quality of images formed by the navigation system. It is shown that when noise distorts more than 31% of the image pixels, the proposed two-stage procedure allows to ensure the selection of the reference object in the image with a probability not lower than 0.9.
- 5 July 2022
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 12,p. 145-151
PROBLEMATIC ISSUES REGARDING THE DEVELOPMENT OF FLIGHT TECHNIQUES FOR AVIATION OF THE ARMED FORCES OF UKRAINE
В роботі запропоновано концептуальний підхід до визначення та обґрунтування нормативних значень показників міцності тканини, що застосовується для виготовлення ЛТО, з урахуванням отриманих результатів контрольних випробувань ЛТО для льотного складу авіації Повітряних Сил Збройних Сил України та обовязкових вимог щодо її міцності.
- 5 July 2022
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 12,p. 145-151
PROBLEMATIC ISSUES REGARDING THE DEVELOPMENT OF FLIGHT TECHNIQUES FOR AVIATION OF THE ARMED FORCES OF UKRAINE
В роботі запропоновано концептуальний підхід до визначення та обґрунтування нормативних значень показників міцності тканини, що застосовується для виготовлення ЛТО, з урахуванням отриманих результатів контрольних випробувань ЛТО для льотного складу авіації Повітряних Сил Збройних Сил України та обовязкових вимог щодо її міцності.