TJTahseen Ali Jabbar

Tahseen Ali Jabbar

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tahseen Ali Jabbar has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Numerical Investigation of Natural Heat Convection in a Triangular Enclosure with a Varying-Diameter Cylindrical Heat Source

    by Safaa H. Faisal, Tahseen A. Jabbar, Ruslan Sabah Abdulrahman, Farah Abdalsalam Ibrahim

    This work offerings a numerical study of natural convection heat transfer within a triangular enclosure having a centrally positioned cylindrical heating source. The effect of the heat source size is investigated by varying its non-dimensional diameter from 0.1 to 0.5. The eating source cylinder and enclosure are maintained at constant temperatures. The buoyancy-driven flow field is analyzed using streamline distributions, non-dimensional velocity magnitudes, and isotherm contours. Results reveal that the size of the internal heating source significantly affects the thermal performance of the combined structure. For small values of , the flow remains weak and localized, with limited convective motion. As increases to moderate values ≈0.3, recirculation regions intensify, velocity fields expand, and thermal plumes rise symmetrically, which indicates enhanced convective transport. However, additional increasing of values leads to flow constriction, reduced circulation strength, and causes less effective heat transfer. It is found that the average Nusselt number decreases with increasing due to diminished temperature gradients and restricted fluid motion despite the larger surface area provided by bigger cylinders. The results are applicable for the design of passive electronic cooling systems, solar thermal collectors, and other natural heat convection-based enclosures.

  • Thermo-Hydraulic Performance of Natural Convection in a Triangular Enclosure with a Vertically Displaced Heat Source

    by Farah Ibrahim Abdalsalam, Ruslan Sabah Abdulrahman, Tahseen A. Jabbar, Safaa Hameed Faisal

    Natural convective in enclosures are very important topics in thermal engineering because they find versatile industrial applications. An internal circular cylinder's vertical position and heat source on fluid flow and heat transfer in a triangular cavity are investigated. Numerical simulations were carried out to analyze variations in the average Nusselt number, streamline topology, temperature distribution, and velocity fields by using ANSYS Fluent. The results show that the Nusselt number rises from approximately 0.91–0.94 at lower positions (Y = 0.1–0.3) to a maximum of about 0.97 near Y = 0.4 driven by intensified thermal gradients and buoyancy-induced circulation. Within the upper-to-mid region (Y = 0.2–0.4) the formation of large adjacent vortices enhances macro-scale mixing, resulting in nearly a 4% improvement in heat transfer relative to the reference case. At mid-level positions (Y = 0.4–0.6) quasi-steady symmetric circulations are sustained, maintaining effective convection with Nu values of 0.95–0.97. In contrast, at higher locations (Y = 0.7–0.9), the weakening of vortex strength leads to flow stagnation and localized deterioration in heat transfer, reducing Nu to about 0.90–0.92. Overall, the findings underscore the critical importance of internal component placement in improving natural cooling performance, and further suggest that the most efficient thermal behavior is achieved when the cylinder and heat source are positioned within 0.2 < Y < 0.4, offering practical guidance for optimizing the thermal design of triangular enclosures.

  • Enhancing the Productivity of a Single-Slope Solar Still Using a Preheating System

    by Asaad H. Majeed, Tahseen A. Jabbar, Adnan A. Ateeq

    Considering the dearth and limited supply of potable water for daily consumption globally, developing a desalination technique to produce water sufficient for the need has become imperative. This study examines the improvement of freshwater productivity in a single-slope solar still by incorporating a solar preheating system. The proposed design utilizes solar still distillation to preheat the feed water before it enters the distillation basin. This approach aims to increase the temperature gradient between the water surface and the glass cover, thereby accelerating the evaporation and condensation process. Experimental evaluations were conducted under varying climatic conditions and flow rates, with and without the preheater. We note that the productivity has improved at each flow rate as follows: at a flow rate of 1 L/min, the improvement percentage reached 96% (CLISS:130 g/hr and CLIPSS:170 g/hr), at a flow rate of 2 L/min, the improvement percentage reached 73% (CLISS:180 g/hr and CLIPSS: 220 g/hr), while the improvement percentage at 3 L/min became 61% (CLISS:240 g/hr and CLIPSS:290 g/hr.), and at a flow rate of 4 L/min, it reached 64% (CLISS:280 g/hr. and CLIPSS: 320 g/hr.), and up to a flow rate of 8 liters/minute, the productivity improvement percentage between the two systems reached 31% (CLISS:310 g/hr. and CLIPSS:340 g/hr.). The results showed that the preheated system significantly improved solar thermal performance and daily production, especially during the early morning and late afternoon hours. Compared to a conventional design, the preheated system achieved an overall productivity increase of 25% to 35%.

  • Open Access

    Studying the Flow Passes a Pier with an Upstream Vane in Open Channel Flow

    by Rafi Mohammed Qasim, Tahseen Ali Jabbar, Bassam Abdullah Mohammed

    The interaction between the hydrodynamic field around the pier and the hydrodynamic field around the vane represents a challenge to the hydraulic designers owing to the high risk that must be considered, especially the alteration in flow velocity and pressure distribution. The problem statement, reveal how the vane redistributes the local pressures around pier under varied vane length moreover we seek about how the variation in the values of Reynolds number has significant impact on the distribution of local pressures. The paper focuses on the numerical simulation of the hydrodynamic field between the vane and the circular pier in two dimensions for steady, incompressible and laminar water flow over a fixed and horizontal bed by using ANSYS Fluent software. The simulation relies on different Reynolds numbers and different vanes lengths. The length and thickness of the vane are described as a function of the pier diameter, while the distance between the vane and the pier has been taken to be equal to the pier diameter. The hydrodynamic field is defined by local static pressure, local dynamic pressure and pressure coefficient. These variables are studied numerically around the pier circumference by depending on an angle measured from the pier centre to any point on the pier circumference. It is found that the variation in these variables with angle based on pressure distribution, velocity distribution, flow separation and flow dissipation, as well as the vane length, has a vital role in determining the hydraulic behaviour of the hydraulic system. The purpose of the paper concentrates on how the vane alter the hydrodynamic features around the pier.


  • Open Access

    Investigating the Turbulent Flow around Semi-Circular Cylinder

    by Tahseen Ali Jabbar, Rafi Mohammed Qasim, Safaa Hameed Faisal, Bassam Abdullah Mohammed

    The Spalart-Allmaras turbulence model is used to study the flow patterns around a semi-circular cylinder surrounded by water in two dimensions with various angles of strike owing to rotating the cylinder by an angle. The rotation angle ranges from zero to 360° and the ANSYS Fluent software is employed to implement the required simulation. The Spalart-Allmaras turbulence model is used to determine the flow velocity vector, velocity contours, and pressure contours. Moreover, this turbulent model is used to calculate three different non-dimensional parameters, the drag coefficient, lift coefficient, and skin friction factors. Two different Reynolds numbers (Re) are adopted in the calculation of the three non-dimensional parameters with various values for the angle of the cylinder rotation. Here, the semi-circular cylinder is considered stationary but it is placed in a water domain in various positions. Due to the scarcity in information about using the Spalart-Allmaras turbulence model as compared with other models, which are widely used to investigate the flow around the cylinder, three turbulent models are employed to verify the results obtained by the Spalart-Allmaras model, these models are (standard), (RNG), and (Realizable). Results show an excellent agreement between the four turbulent models compared, where there is no significant variation in the obtained results, all results are very similar.


  • Open Access

    Vane Angle Influence on the Flow Pattern around a Circular Pier

    by Tahseen Jabbar, Rafi M. Qasim, Bassam A. Mohammed

    This paper intends to numerically analyze the hydrodynamic characteristics of the flow pattern that surrounds the circular pier near the vane angle. These include flow velocity, turbulent intensity, and pressure. A computational fluid dynamic is proposed to simulate the two-dimensional model by using the finite volume method, while the k - ε turbulence model is used to describe the turbulent model. The vane is located upstream of the pier, with its dimensions as function of the pier diameter. The distance between the vane and the pier center is equal to the pier diameter, the angle of the vane is put with a range from 60o to 180o, and the pier diameter is equal to 10 mm. The turbulent flow has a Reynolds number that varies from 20000 to 50000. The existence of the vane angle leads to two different processes, which are flow separation and flow dissipation, which have a direct effect on flow velocity, turbulent intensity, and pressure. From the current numerical results, the relationships between Reynolds number and average flow velocity, maximum flow velocity, turbulent intensity, and maximum turbulent intensity are more sensitive to flow separation and flow dissipation along the vane. Also, positive and negative pressure distributions have a higher influence on flow separation and flow dissipation.


  • Modeling of parabolic collector (a new approach of concentration ratio calculation)

    by Tahseen Ali Jabbar, Raed S. Batbooti, Bassam A. Mohammed

    Modern engineering challenges require the world to use renewable and environmentally friendly energy. One of the most important forms of renewable energy is solar energy. The parabolic collector is a popular collector used to absorb solar energy. In this study, a new approach is used to calculate the radiation concentration ratio in a parabolic collector. The concentration ratio is calculated from the ratio of the reflection beam to the incident beam radiation, and it depends on two main variables: the collector width (W) and the focal length (P). The model is tested and compared to results from previously published work. The comparison showed that the model results can be relied upon for accuracy and are compatible with published results. The results indicate that increasing the width of the collector (W) leads to an increase in the concentration ratio (RC), while the contrary is true when the focal length (P) increased. The collector efficiency minimum values were 19.3%, 21.07 %, 22.35% and 23.33% at concentration ratios of 69, 80, 103 and 148 in line with the focus length values of 0.6m, 0.7m, 0.8m and 0.9m, respectively. The developed model is applied according to the conditions of Basra, Iraq (47.78o longitude and 30.5o latitude).


  • Open Access

    Impact of T-Splitter on the Laminar Flow Field Around Cylinder Pier

    by Rafi Mohammed Qasim, Safaa Hameed Faisal, Tahseen Ali Jabbar

    The hydrodynamic pattern, which surrounds the pier near a splitter that has T-shape, is investigated by adopting a numerical method and using ANSYS Fluent Software to achieve computation. The essential objective of this paper refers to revealing the behavior of the hydrodynamic field around the...


  • Open Access

    Numerical study on the effect of anisotropy on deformation behavior of aluminum bilayer sheets in single point incremental metal forming

    by Bassam Abdullah Mohammed, Raed Sabri Batbooti, Tahseen Ali Jabbar

    The anisotropy of metals is an important property that has a significant impact on the dimensional accuracy of components in manufacturing. In metal forming processes significant attention has been given to multilayer composite sheets as they may combine the advantages of materials with various mechanical properties. In this study, the effect of anisotropy is investigated in the process of single point incremental forming (SPIF) of aluminum bilayer sheets. The finite element method (FEM) is used to study the effect of layer arrangement and the anisotropy of metal sheets relative to the rolling direction. For the effective description of sheet metal anisotropy, the two-dimensional Yld2000-2D yield function is implemented in Abaqus software using a material subroutine (VUMAT). The calculation and calibration of the coefficients of Yld2000-2D in accordance with the experimental data were performed using a MATLAB code. For comparison, the anisotropic coefficients of Yld2000-2D were replaced by unit values in the same VUMAT to investigate forming behavior in the isotropic case with the von Mises yield function. Anisotropic and isotropic models are compared in a conical geometry by assessing equivalent plastic strain, sheet thickness, and forming tool reaction forces. Our findings show that anisotropy of sheet metal causes less variation in material properties compared to the isotropic case, significantly affecting the stiffness and, subsequently, the final shape dimensional accuracy of the formed component. The results of the study have a practical application in that they can be used to identify strategies for anisotropic bimetal sheets to improve such material forming processes