MMMikko Miettinen

Mikko Miettinen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mikko Miettinen has a total of 63 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Modelling the effect of polysilicon film thickness on the grain boundary density at the surface

    by Antti Lahti, Mikael Santonen, Zahra Jahanshah Rad, Mikko Miettinen, Masoud Ebrahimzadeh, Pekka Laukkanen, Marko Punkkinen, Kalevi Kokko, Katja Parkkinen, Markus Eklund

    Scanning electron microscope (SEM) images are used to create a model for the density of grain boundaries on the surface poly-silicon. The poly-silicon was deposited onto a silicon wafer using low-pressure chemical vapour-deposited (LPCVD) from silane (SiH$_4$) gas. The SEM images were analysed by using image processing to separate the grains and grain boundaries. This way the grain size distribution was obtained from 0.2 $\upmu$m, 0.5 $\upmu$m and 2.8 $\upmu$m thick samples. These distributions matched well with the normal distributions that we fitted to the data. We used these distributions to make a model for the grain boundary density on the surface of the poly-silicon of given thickness. For this model, we assumed the grains to be circular. The model depends only on the thickness of the poly-silicon.

  • Open Access

    Effect of H2O2 and H2O immersions on epitaxial GaInP-GaAs interfaces: Photoluminescence and x-ray photoelectron study

    by Zahra Jahanshah Rad, Mikko Miettinen, Johanna Laaksonen, Perttu Piispanen, Marko Punkkinen, Kalevi Kokko, Pekka Laukkanen, Antti Tukiainen, Heidi Tuorila, Helmer Piirilä, et al.

  • Open Access

    Surface Properties of p‐GaN and Formation of Nickel Metal Contacts

    by Mikko Miettinen, Vesa Nuutila, Zahra Jahanshah Rad, Masoud Ebrahimzadeh, Anni Ruokonen, Risto Punkkinen, Juha‐Pekka Lehtiö, Marko Punkkinen, Pekka Laukkanen, Kalevi Kokko, et al.

    Nickel (Ni) is the key component in ohmic contacts for Mg‐doped p‐GaN, but the detailed formation mechanisms of the ohmic contact have not yet been understood. In this work, the effect of potassium hydroxide (KOH)‐based chemical treatment on the surface of p‐GaN is investigated using X‐ray photoelectron spectroscopy (XPS), scanning tunneling microscopy (STM), and low‐energy electron diffraction (LEED). Ni metal contacts on the chemically treated p‐GaN surface are studied using transfer length method (TLM) and synchrotron radiation photoelectron spectroscopy (SR‐XPS). The chemical treatment of p‐GaN improves the brightness of the (1x1) hexagonal diffraction pattern in LEED and keeps the 2D terrace structure in STM visible. Concomitantly, XPS shows that the amount of O, C, and Mg–O bonds at the surface were reduced. Ni/p‐GaN provided an ohmic contact after annealing in ultra‐high vacuum (UHV) at 500 °C. Simultaneously, SR‐XPS shows the diffusion of Ga to Ni and the formation of a previously unreported Ga 3d component, which has a surprisingly narrow line shape, indicating that it originates from a crystalline interface phase. Diffusion of Ga is discussed to cause Ga vacancies and acceptor levels in the bandgap increasing carrier tunneling, thus enabling ohmic contact.


  • Open Access

    Effects of ultra-high vacuum treatments on n-type Si contact resistivity

    by Mikko Miettinen, Esa Vuorinen, Juha-Pekka Lehtiö, Zahra Jahanshah Rad, Risto Punkkinen, Mikhail Kuzmin, Jarno Järvinen, Ville Vähänissi, Pekka Laukkanen, Hele Savin, et al.


  • Open Access

    Passivation of Germanium Surfaces by HF:H2O2 Aqueous Solution

    by Mariia Terletskaia, Joonas Isometsä, Mikko Miettinen, Pekka Laukkanen, Ville Vähänissi, Hele Savin

    Promising intrinsic electronic properties, such as narrow bandgap and high charge carrier mobilities, make germanium (Ge) a good replacement for silicon in optoelectronic applications (e.g., photodetectors). However, successful fabrication of efficient Ge devices requires minimization of both reflectance and surface recombination losses. This work begins with an observation that metal‐assisted chemical etching (MACE) of Ge surfaces, used for optics improvement, reduces surface recombination without application of any intentional passivation. We proceed with investigation of the effect of MACE solution components and their mixtures on Ge surface passivation. The results demonstrate that HF:H2O2 aqueous solution leads to efficient and stable passivation. The film formed in this solution secures surface recombination velocity (Seff) of 14 cm s−1. Morphological and chemical characterization of the structure reveals porous germanium (PGe) layer with some GeOx included. Finally, we propose several hypotheses on a mechanism behind this passivation, among which are the presence of GeO2 at the film‐bulk Ge interface and appearance of a potential barrier due to the heterojunction formation. The presented Ge passivation with PGe layer provides a simple and cost‐efficient alternative to existing state‐of‐the‐art passivation schemes.

  • Open Access

    A Detailed Examination of Polysilicon Resistivity Incorporating the Grain Size Distribution

    by Mikael Santonen, Antti Lahti, Zahra Jahanshah Rad, Mikko Miettinen, Masoud Ebrahimzadeh, Juha-Pekka Lehtiö, Enni Snellman, Pekka Laukkanen, Marko Punkkinen, Kalevi Kokko, et al.

    Current transport in polysilicon is a complicated process with many factors to consider. The inhomogeneous nature of polysilicon with its differently shaped and sized grains is one such consideration. We have developed a method that enhances existing resistivity models with a 2-D extension that incorporates the grain size distribution using a Voronoi-based resistor network. We obtain grain size distributions both from our growth simulations (700, 800, and 900 K) and experimental analysis. Applying our method, we investigate the effect that variation in grain size produces with cases of different average grain sizes (2 nm–3 $\mu$m). For example, the resistivity of polysilicon with an average grain size of 175 nm drops from 11 to 4.5 k$\Omega\cdot$cm when compared with conventional 1-D modeling. Our study highlights the strong effect of grain size variation on resistivity, revealing that wider distributions result in significant resistivity reductions of up to more than 50%. Due to larger grains present with a grain size distribution, current transport encounters fewer grain boundaries while the average grain size remains the same resulting in fewer barriers along the current transport path. Incorporating the grain structure into the resistivity modeling facilitates a more detailed and comprehensive characterization of the electrical properties of polysilicon.


  • Open Access

    Polycrystalline silicon, a molecular dynamics study: II. Grains, grain boundaries and their structure

    by Antti Lahti, Mikael Santonen, Zahra Jahanshah Rad, Mikko Miettinen, Masoud Ebrahimzadeh, Juha-Pekka Lehtiö, Pekka Laukkanen, Marko Punkkinen, Petriina Paturi, Kalevi Kokko, et al.

    Polycrystalline silicon (poly-Si) is an excellent material for use in microelectronic devices, both in electrical and mechanical applications. Its mechanical and electrical properties are widely adjustable, its processing technology is compatible with existing microcircuit manufacturing technology, and its availability and recyclability are at a high level. Here, we focus on investigating the properties of poly-Si that distinguish it from other forms of silicon, that is, grains, grain boundaries, and the conditions and treatments that determine grain and grain boundary properties. Starting from the molecular dynamics simulations of the deposition of thin poly-Si films under different growth conditions we study the properties of the films, grains, and grain boundaries as a function of growth time, growth temperature, and post-annealing. We aim to get data and information that will form the essential basis for future research on the electrical properties of poly-Si. The main results are: (i) the effect of post-annealing on the distribution of the grain size and grain boundary thickness (ii) the distribution of the grain orientations, and (iii) the density of the 3- and 5-bonded atoms as a function of deposition temperature.


  • Open Access

    Polycrystalline silicon, a molecular dynamics study: I. Deposition and growth modes

    by Mikael Santonen, Antti Lahti, Zahra Jahanshah Rad, Mikko Miettinen, Masoud Ebrahimzadeh, Juha-Pekka Lehtiö, Pekka Laukkanen, Marko Patrick John Punkkinen, Petriina Paturi, Kalevi Kokko, et al.

    Polycrystalline silicon (poly-Si) significantly expands the properties of the ICT miracle material, silicon (Si). Depending on the grain size and shape and grain boundary structure, the properties of poly-Si exceed what single-crystal (c-Si) and amorphous (a-Si) silicon can offer, especially for radio frequency (RF) applications in microelectronics. Due to its wide range of applications and, on the one hand, its theoretically and technologically challenging microstructure, poly-Si research is the most timely (Ding et al 2020 Mater. Charact. 161 110174; Zhao and Li 2019 Acta Mater. 168 52–62). In this report, we describe how we simulate and analyse the phenomena and mechanisms that control the effect of poly-Si deposition parameters on the structure of the deposited poly-Si films using classical molecular dynamics simulations. The grain shape and size, degree of crystallinity, grain boundary structure and the stress of poly-Si films are determined depending on the growth temperature, temperature distribution in the growing film, deposition flux, flux variation and the energy transferred to the film surface due to the deposition flux. The main results include: (i) the dependence of the crystallinity profile of the deposited poly-Si films on the stress, temperature and the different parameters of the deposition flux, (ii) growth modes at the early stages of the deposition, (iii) interaction and stability of seed crystallites at the early stage of the deposition of poly-Si films and the transition from the isolated crystallite growth to the poly-Si growth, (iv) interplay of the temperature, crystallinity, crystal shape and heath conductivity of different Si phases, (v) four different stages of crystallite growth are described: nucleation, growth, disappearance and retardation.


  • Structurally simplified GCMO crossbar design for artificial synaptic networks

    by Anni Antola, Ilari Angervo, Hannu Huhtinen, Mikko Miettinen, Alejandro Schulman, Petriina Paturi

    Harnessing the full power of memristors as artificial synapses demands a simple and scalable crossbar architecture enabling their seamless integration into diverse applications. This Letter presents the 3×3 memristor crossbar array configuration featuring a grid of interconnected devices. The composition includes Al as the reactive top electrode connecting the device columns and Gd1−xCaxMnO3 (GCMO, x=0.8) serving as the bottom electrode connecting the device rows as well as the memristive material eliminating the need for additional layers and fabrication steps. Controlled-sized vias through insulating the Al2O3 layer connect the electrodes forming the active interface. The idea is validated with a test sample of 3×3 crossbars with the Au/GCMO/Al structure, Au enabling Ohmic contact to GCMO, with device resistive switching ratios mostly around 102 and yield of over 90%. The devised crossbar structure could provide a highly scalable, yet simple, geometry suitable for synaptic networks.


  • Controlling SiO 2 Thin Film Charge and Interface Defect Density on Germanium

    by Hanchen Liu, Toni P Pasanen, Oskari Leiviskä, Joonas Isometsä, Tsun Hang Fung, Marko Yli-Koski, Mikko Miettinen, Pekka Laukkanen, Ville Vähänissi, Hele Savin

    2023 International Conference on Solid State Devices and Materials ,Controlling SiO 2 Thin Film Charge and Interface Defect Density on Germanium