Daniel H. Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Daniel H. Zhou has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Minjie Chen
Princeton University
6 shared publications - Jaeil Baek
Department of Electrical and Computer Engineering and Andlinger Center for Energy and the Environment, Princeton University, Princeton, NJ, USA
2 shared publications - Ping Wang
Department of Electrical and Computer Engineering and the Andlinger Center for Energy and the Environment, Princeton University, Princeton, NJ, USA
2 shared publications - Youssef Elasser
Department of Electrical and Computer Engineering and Andlinger Center for Energy and the Environment, Princeton University, Princeton, NJ, USA
2 shared publications David M. Giuliano
Semi Corporation, San Diego, CA, USA
1 shared publication- Dragan Maksimovic
University of Colorado
1 shared publication
Latest Publications
- 6 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (5) , 6578-6592
Balancing Flying Capacitor Multilevel Converters With Coupled Inductors: Multiresonant Dynamics
This paper investigates dynamic balancing of flying capacitor multilevel (FCML) converters with coupled inductors. Coupled inductors help to reduce the ripple current, accelerate transient response, and balance the flying capacitors of FCML converters at steady-state. However, coupled inductors also change the dynamic balancing properties compared to uncoupled inductors, and these principles must be understood for robust design. As an extension of a previously developed feedback mechanism for understanding the steady-state behaviors of coupled inductors in FCML converters, this paper derives models of coupled inductor FCML converters in dynamic operation, revealing several key insights: (i) the multi-resonant behavior of large-order FCML converters and their dependence on the initial conditions, (ii) how power dissipation relates to balancing speed, and (iii) the relation between multiphase and multilevel FCML balancing. The insights uncovered by this paper can provide useful guidelines for designing multi-phase self-balanced FCML converters with coupled inductors.
- 6 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (5) , 6578-6592
Balancing Flying Capacitor Multilevel Converters With Coupled Inductors: Multiresonant Dynamics
This paper investigates dynamic balancing of flying capacitor multilevel (FCML) converters with coupled inductors. Coupled inductors help to reduce the ripple current, accelerate transient response, and balance the flying capacitors of FCML converters at steady-state. However, coupled inductors also change the dynamic balancing properties compared to uncoupled inductors, and these principles must be understood for robust design. As an extension of a previously developed feedback mechanism for understanding the steady-state behaviors of coupled inductors in FCML converters, this paper derives models of coupled inductor FCML converters in dynamic operation, revealing several key insights: (i) the multi-resonant behavior of large-order FCML converters and their dependence on the initial conditions, (ii) how power dissipation relates to balancing speed, and (iii) the relation between multiphase and multilevel FCML balancing. The insights uncovered by this paper can provide useful guidelines for designing multi-phase self-balanced FCML converters with coupled inductors.
- Open Access
- 25 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (8) , 9268-9291
Balancing Multiphase FCML Converters With Coupled Inductors: Modeling, Analysis, Limitations
This paper investigates the modeling, analysis, and design methods for passively balancing flying capacitor multilevel (FCML) converters using coupled inductors. Coupled inductors synergize with FCML converters by reducing inductor current ripple, reducing switch stress, and, as proven in this paper, by providing flying capacitor voltage balancing. This enables FCML topologies to be scaled well to larger systems. This paper proves that coupled inductors can solve the unbalancing problem in many FCML converters. Moreover, tools are developed to thoroughly explain and quantify coupled inductor balancing, allowing general design guidelines to be offered for robust coupled inductor FCML converters. Finally, this paper derives the limitations of coupled inductor balancing with respect to the number of phases, levels, and the required coupling ratio. The key principles of coupled inductor FCML balancing in steady-state are demonstrated with a systematic theoretical framework and extensive experimental and simulation results.
- 25 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (8) , 9268-9291
Open AccessBalancing Multiphase FCML Converters With Coupled Inductors: Modeling, Analysis, Limitations
This paper investigates the modeling, analysis, and design methods for passively balancing flying capacitor multilevel (FCML) converters using coupled inductors. Coupled inductors synergize with FCML converters by reducing inductor current ripple, reducing switch stress, and, as proven in this paper, by providing flying capacitor voltage balancing. This enables FCML topologies to be scaled well to larger systems. This paper proves that coupled inductors can solve the unbalancing problem in many FCML converters. Moreover, tools are developed to thoroughly explain and quantify coupled inductor balancing, allowing general design guidelines to be offered for robust coupled inductor FCML converters. Finally, this paper derives the limitations of coupled inductor balancing with respect to the number of phases, levels, and the required coupling ratio. The key principles of coupled inductor FCML balancing in steady-state are demonstrated with a systematic theoretical framework and extensive experimental and simulation results.
- 2 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (5) , 5680-5687
Interphase $LC$ Resonance and Stability Analysis of Series-Capacitor Buck ConvertersHybrid switched capacitor power converters, such as the series-capacitor buck (SCB) converter, have intrinsic $LC$ resonant dynamics that might influence its control stability and transient response. This letter presents a systematic approach to analyzing this intrinsic resonant behavior, which can be classified into output $LC_{o}$ resonance and interphase $LC_{B}$ resonance based on common-mode and differential-mode decomposition. The impacts of coupled inductors on the resonant amplitude, frequency, and settling time during a step line transient are analyzed. The influence of intrinsic resonance on control stability is clarified, providing guidance for controller design. A two-phase SCB prototype was built and tested with discrete and coupled inductors under different operating conditions. All the analyses are verified by simulation or experimental results.
- 2 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (5) , 5680-5687
Interphase $LC$ Resonance and Stability Analysis of Series-Capacitor Buck ConvertersHybrid switched capacitor power converters, such as the series-capacitor buck (SCB) converter, have intrinsic $LC$ resonant dynamics that might influence its control stability and transient response. This letter presents a systematic approach to analyzing this intrinsic resonant behavior, which can be classified into output $LC_{o}$ resonance and interphase $LC_{B}$ resonance based on common-mode and differential-mode decomposition. The impacts of coupled inductors on the resonant amplitude, frequency, and settling time during a step line transient are analyzed. The influence of intrinsic resonance on control stability is clarified, providing guidance for controller design. A two-phase SCB prototype was built and tested with discrete and coupled inductors under different operating conditions. All the analyses are verified by simulation or experimental results.
- 27 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (12) , 15035-15050
Matrix Coupled All-in-One Magnetics for PWM Power Conversion
This article investigates the matrix coupled “all-in-one” magnetic structure that combines both series coupling and parallel coupling for pulse-width modulated (PWM) power conversion. A systematic analysis of the current ripple reduction mechanism is performed. Current ripple steering among asymmetric series coupled windings is discussed. The transient performance of the matrix coupled inductor is demystified, providing insights for analyzing converter dynamics and its large- or small-signal modeling. To quantify the benefits of matrix coupling, a figure of merit is defined by comparing the current ripple of a matrix coupled inductor to that of a discrete inductor given the same transient speed. The comparison results indicate that a higher number of phases and a stronger matrix coupling coefficient amplify the benefits of matrix coupling. A 1 V-to-5 V input, 1 V-to-5 V output, four-phase matrix coupled synchronous SEPIC converter with planar PCB integrated magnetics is built and tested. The matrix coupled SEPIC prototype can support load current up to 185 A at 5 V-to-1 V voltage conversion with a maximum power density over 470 W/in $^\text{3}$ . Compared to commercial discrete inductors, the matrix coupled inductor has a 5.6 times smaller size and 8.5 times faster transient speed with similar current ripple and current rating. The experimental results validate the matrix coupling concept and the theoretical analysis, opening the possibilities toward wide adoption of ‘‘all-in-one-magnetics” in PWM topologies.
- 27 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (12) , 15035-15050
Matrix Coupled All-in-One Magnetics for PWM Power Conversion
This article investigates the matrix coupled “all-in-one” magnetic structure that combines both series coupling and parallel coupling for pulse-width modulated (PWM) power conversion. A systematic analysis of the current ripple reduction mechanism is performed. Current ripple steering among asymmetric series coupled windings is discussed. The transient performance of the matrix coupled inductor is demystified, providing insights for analyzing converter dynamics and its large- or small-signal modeling. To quantify the benefits of matrix coupling, a figure of merit is defined by comparing the current ripple of a matrix coupled inductor to that of a discrete inductor given the same transient speed. The comparison results indicate that a higher number of phases and a stronger matrix coupling coefficient amplify the benefits of matrix coupling. A 1 V-to-5 V input, 1 V-to-5 V output, four-phase matrix coupled synchronous SEPIC converter with planar PCB integrated magnetics is built and tested. The matrix coupled SEPIC prototype can support load current up to 185 A at 5 V-to-1 V voltage conversion with a maximum power density over 470 W/in $^\text{3}$ . Compared to commercial discrete inductors, the matrix coupled inductor has a 5.6 times smaller size and 8.5 times faster transient speed with similar current ripple and current rating. The experimental results validate the matrix coupling concept and the theoretical analysis, opening the possibilities toward wide adoption of ‘‘all-in-one-magnetics” in PWM topologies.
- 16 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (08858993) , 1
Reluctance-Based Dynamic Models for Multiphase Coupled Inductor Buck Converters
This article investigates reluctance-based dynamic models for multiphase coupled inductor buck converters. A reluctance-based state-space model is derived based on the inductance dual model of the coupled inductor. The physical core geometry is explicitly related to the circuit's dynamic properties to provide useful insights for coupled inductor design, especially if the number of phases is large. The transfer functions of multiphase coupled inductor buck converters with an arbitrary number of phases are derived based on the inductance dual model. It is shown that a symmetric multiphase coupled inductor buck converter can be modeled as a second-order dynamic system when perturbed with a common-mode duty cycle change, and the duty-cycle-to-output-voltage and duty-cycle-to-output-current transfer functions are determined by the leakage flux path of the coupled inductor. The differential-mode current balancing mechanisms of the multiphase coupled inductor buck converter are decoupled from other system dynamics and are determined only by the winding resistance and the magnetizing flux path. The applicability of the model in cases with structural asymmetry is discussed, with the results supporting the feasibility of scaling the coupled inductor structure to a large number of phases with tolerance for asymmetry. The dynamic models are verified by SPICE simulations and experimental results.
- 16 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (08858993) , 1
Reluctance-Based Dynamic Models for Multiphase Coupled Inductor Buck Converters
This article investigates reluctance-based dynamic models for multiphase coupled inductor buck converters. A reluctance-based state-space model is derived based on the inductance dual model of the coupled inductor. The physical core geometry is explicitly related to the circuit's dynamic properties to provide useful insights for coupled inductor design, especially if the number of phases is large. The transfer functions of multiphase coupled inductor buck converters with an arbitrary number of phases are derived based on the inductance dual model. It is shown that a symmetric multiphase coupled inductor buck converter can be modeled as a second-order dynamic system when perturbed with a common-mode duty cycle change, and the duty-cycle-to-output-voltage and duty-cycle-to-output-current transfer functions are determined by the leakage flux path of the coupled inductor. The differential-mode current balancing mechanisms of the multiphase coupled inductor buck converter are decoupled from other system dynamics and are determined only by the winding resistance and the magnetizing flux path. The applicability of the model in cases with structural asymmetry is discussed, with the results supporting the feasibility of scaling the coupled inductor structure to a large number of phases with tolerance for asymmetry. The dynamic models are verified by SPICE simulations and experimental results.
- Open Access
- 25 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Voltage Balancing of Multiphase FCML Converters with Coupled Inductors
Flying capacitor voltage balancing is critical for the performance of flying capacitor multilevel (FCML) converters. This paper investigates the intrinsic capacitor voltage balancing of multiphase FCML converters with coupled inductors. It is shown that the coupled inductor provides flying capacitor voltage balancing that minimizes steady-state imbalances due to periodic disturbances compared to converters with uncoupled inductors. A dynamic model of natural balancing of the converter is derived and used to estimate the time required for the flying capacitors to settle from an initial imbalance. The theoretical predictions are verified with analytical derivations, SPICE simulations, and experimental results.
- 25 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessVoltage Balancing of Multiphase FCML Converters with Coupled Inductors
Flying capacitor voltage balancing is critical for the performance of flying capacitor multilevel (FCML) converters. This paper investigates the intrinsic capacitor voltage balancing of multiphase FCML converters with coupled inductors. It is shown that the coupled inductor provides flying capacitor voltage balancing that minimizes steady-state imbalances due to periodic disturbances compared to converters with uncoupled inductors. A dynamic model of natural balancing of the converter is derived and used to estimate the time required for the flying capacitors to settle from an initial imbalance. The theoretical predictions are verified with analytical derivations, SPICE simulations, and experimental results.