TRToibah Abd Rahim

Toibah Abd Rahim

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Toibah Abd Rahim has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Characterization on Structural and Electrical Properties of Manganese-doped Potassium Sodium Niobate (KNN) Thin Film by Sol-gel Method

    by Muhd Afiq Hafizuddin Azman, Mohd Warikh Abd Rashid, Umar Al-Amani Haji Azlan, Noraiham Mohamad, Toibah Abd Rahim, Maziati Akmal Mat Harttar, Toshihiro Moriga

    The aim of this study is to create and examine thin layers of Mn-doped potassium sodium niobate (KNN) using the sol-gel method. The objective is to examine and resolve the problem of elevated leakage current density that arises at high electric fields in KNN films. The objective is to enhance the dielectric and ferroelectric characteristics by including manganese (Mn) dopants at various concentrations ranging from pure KNN to 0.9%, while maintaining acceptable insulation resistance. X-ray diffraction (XRD) was employed to investigate the crystalline structure of Mn-doped KNN thin films. Based on the XRD analysis, the Mn-doped KNN thin films exhibit an orthorhombic crystal structure during manufacture. The presence of KNN thin films is confirmed by the XRD peaks, indicating a successful synthesis. The microstructure and surface morphology of the thin films were examined using field-emission scanning electron microscopy (FESEM). The most significant outcomes in terms of dense grain growth and uniform grain size were observed in thin films of KNN doped with 0.3% Mn. Based on the findings from the FESEM and AFM, the cracks were covered with thin films of uniform thickness, and the surface data of the KNN thin films did not provide any support for them. Atomic Force Microscopy (AFM) and Piezoresponse Force Microscopy (PFM) analysis indicate a notable enhancement in the surface morphology and the value of the piezoelectric coefficient in Mn-doped KNN thin films, with an increase of 0.3%.

  • Open Access

    Influence of Accelerators and Filler Content on Physical Properties of Tin Dioxide Reinforced Deproteinized Natural Rubber Nanocomposites

    by Noraiham Mohamad, Jeefferie Abd Razak, Maizatul Aisyah Mohamad, Soh Tiak Chuan, Hairul Effendy Ab Maulod, Mohamad Iqbal Shueb, Qumrul Ahsan, Toibah Abd Rahim, Mohd Warikh Abd Rashid

    The global electrical industry is looking for sustainable materials in various domains, including electrical insulation cable materials. Tin dioxide (SnO2) nanoparticles combined with deproteinized natural rubber (DPNR) have the potential to produce an excellent and green electrical insulation material that combines their parents’ electrical properties. Yet, the processability is highly influenced by the curing system. The cure characteristics of rubber nanocomposites were investigated for the influence of different accelerators and SnO2 content. The 2,20-dithiobis (benzothiazole) (MBTS)-cured compounds exhibit ultrafast curing and higher melt viscosity than the N-Cyclohexyl-2-benzothiazole sulphonamide (CBS)-cured nanocomposite compounds, regardless of the increment in SnO2 loadings. Therefore, CBS-cured nanocomposites exhibit acceptable process safety, good processability and properties. The morphological, thermal and compositional analyses further supported the density, swelling behaviour and hardness of the DPNR nanocomposites of the selected accelerator system.


  • Open Access

    Influence of Calcination Temperature on the Physicochemical Properties of Synthesized Hydroxyapatite from Cow Bone Waste

    by Adibah Haneem Mohamad Dom, Salman Rezadin, Toibah Abd Rahim, Zurina Shamsudin, Siti Rahmah Shamsuri, Fahad Hussain Alhamoudi

    The chemical similarity found in hydroxyapatite (HA) with natural bone makes it a popular choice for bone replacement. Therefore, in recent years, there has been an increasing tendency towards manufacturing HA from biological sources or waste, such as animal bone waste. Using naturally derived HA can benefit the economy, the environment, and human health. Therefore, this paper reports on the extraction of HA from cow bone waste using a simple and cost-effective technique. The bone powder was calcined in a furnace at temperatures ranging from 700°C to 1000°C for two hours. Then, the synthesized HA was characterized using a Field Emission Scanning Electron Microscope (FESEM), Energy Dispersive X-ray Spectroscopy (EDX), Fourier Transform Infrared Spectroscopy (FTIR), and X-ray diffraction (XRD). FESEM images revealed that HA particles with non-uniform spherical morphology were produced where the size increases with the calcination temperature. This finding is consistent with the average value of particle diameter measured at a temperature of 1000°C (0.783±0.268 µm) which is much greater than at a temperature of 700°C (0.272±0.128 µm). EDX analysis revealed that the Ca/P ratio value obtained in this study indicates non-stoichiometric HA production. XRD analysis shows that only the HA phase is present and there is no secondary phase generated from the calcination process. Meanwhile, FTIR analysis can detect the main group elements of the HA which were OH- and PO43-. The findings obtained in this study prove the effectiveness of this method in producing highly crystalline HA powder from cow bone waste using the thermal treatment method.


  • Open Access

    Vulcanization Bonded Natural Rubber-Aluminum by Chemically Modified Graphene Nanoplatelets-Epoxy Adhesive without Primer

    by Mazatul Nadia Mohd Zafri, Noraiham Mohamad, Mohd Edeerozey Abd Manaf, Toibah Abd Rahim, Jeefferie Abd Razak, Hairul Effendy Ab Maulod, Qumrul Ahsan, Muhammad Afiq Ani, Ming Ming Teng

    Passive engine mounts have been widely used as the simplest solution to isolate the vibration, noise, and harshness from the engine and chassis for a smooth ride. It is mainly made from rubber and metal, requiring rubber-to-metal bonding. Most studies of rubber-to-metal via adhesive bond report the adhesion properties with the help of a primer. In this study, an adhesive system of graphene nanoplatelets (GNPs) reinforced epoxy resin was investigated for their potential to bond the natural rubber composites (NR) with aluminium alloy (AL-alloy) without any application of primer to assess the GNPs' unique contribution to the adhesion criteria. Chemically treated GNPs were mixed into an epoxy system via an ultrasonication method at 0, 0.5, 3.0, and 7.0 wt% loading variation. The epoxy/GNPs (E-GNP) adhesives were then applied to bond pre-etched Al-alloy sheets with NR composites through the vulcanization bonded. The vulcanization was taken placed in a hot press machine under the temperature of 140°C, a pressure of 100 kg/cm2 for 10 minutes before the samples were subjected to the peel test following ASTM D429. The bonding characteristics were further supported by morphological, compositional, thermal, and structural analyses via Scanning Electron Microscopy, Fourier Transform Infrared Spectroscopy, Differential Scanning Calorimetry, and X-Ray Diffraction. From the results, the E-GNP adhesive system has proven to increase the maximum peel strength of the NR composites-Al alloy by up to 170 % if compared to the control epoxy system. The findings would be a promising technology for improving bonding strength between rubber-metal in diverse applications.


  • Open Access

    Influence of Remaining Oxide on the Adhesion Strength of Supersonic Particle Deposition TiO2 Coatings on Annealed Stainless Steel

    by Noor Irinah Omar, Yusliza Yusuf, Syahrul Azwan bin Sundi, Ilyani Akmar Abu Bakar, Verry Andre Fabiani, Toibah Abdul Rahim, Motohiro Yamada

    The cold spray or Supersonic Particle Deposition technique has great potential for producing ceramic nanostructured coatings. This technique operates at a processing temperature that is low enough to preserve the initial feedstock materials’ microstructure. Nevertheless, depositing ceramic powders using a cold spray can be challenging because of the materials’ brittle nature. The interaction between substrate and particles is significantly influenced by substrate attributes, including hardness, material nature, degree of oxidation and temperature. In this study, the effect of the substrate’s remaining oxide composition on the adhesion strength of an agglomerated nano-TiO2 coating was investigated. The results showed that the coating adhesion strength increased for hard materials such as stainless steel and pure chromium as the annealed substrate temperature also increased from room temperature to 700 °C, indicating thicker oxide on the substrate surface. TiO2 particles mainly bond with SUS304 substrates through oxide bonding, which results from a chemical reaction involving TiO2-OH−. Chromium oxide (Cr2O3) is thermodynamically preferred in SUS304 and provides the OH− component required for the reaction. SUS304 shows a thermodynamic preference for chromium oxide (Cr2O3), and this enables Cr2O3 to provide the necessary OH− component for the reaction.


  • Open Access

    Moisture Absorption and Thermal Properties of Unidirectional Pineapple Leaf Fibre/Polylactic Acid Composites under Hygrothermal Ageing Conditions

    by Zaleha Mustafa, Anira Shahidah Razali, Thavinnesh Kumar Rajendran, Siti Hajar Sheikh Md Fadzullah, Sivakumar Dhar Malingam, Toibah Abd Rahim, Thanate Ratanawilai

    In this study, the effect of fibre content on moisture absorption and thermal properties of pineapple leaf fibre (PALF) reinforced polylactic acid (PLA) at elevated temperature and humidity was assessed. The unidirectional PALF/PLA composites were fabricated by using pre-pregging technique and compressed moulded to produce composites with two fibre loadings (40 and 60 wt. %). The composite was saturated in a humidity chamber that contains 90% relative humidity at 50°C for 30 days. The effect of different fibre loading on moisture absorption was measured through moisture uptake. Their thermal stability and thermal characteristic were evaluated by using thermal gravimetric analysis (TGA) and differential scanning analysis (DSC). The result showed that moisture absorption increases with the increase of fibre content and follows Fickian Law. The presence of PALF reduces the initial thermal degradation of the neat PLA as well as promoted the crystallization of the PLA. Upon exposure to the high temperature and humidity, the value glass transition temperature (Tg) and melting temperature (Tm) of the neat PLA and PALF/PLA composites shifted to the lower temperature possibly due to hydrolytic degradation in the composite structure.