Ting Fu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ting Fu has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
- Wanhua Zheng
Shandong University
13 shared publications - Aiyi Qi
Chinese Academy of Sciences
7 shared publications - Xuyan Zhou
Key Laboratory of Solid-State Optoelectronics Information Technology, Institute of Semiconductors, Chinese Academy of Sciences, Beijing, China
7 shared publications - Hongwei Qu
Key Laboratory of Solid-State Optoelectronics Information Technology and State Key Laboratory on Integrated Optoelectronics, Institute of Semiconductors, Chinese Academy of Sciences, Beijing, China
4 shared publications - Yufei Wang
Laboratory of Solid State Optoelectronics Information Technology, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, China
4 shared publications Chuanwang Xu
Weifang Academy of Advanced Opto-Electronic Circuits, Weifang, Shandong, China
3 shared publications
Latest Publications
- 2 March 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (9)
>95% TM-polarized 780 nm diode laser enabled by GA–NN co-optimization of quantum states and optical states
We demonstrate a high-performance 780 nm diode laser, achieving a transverse-magnetic degree of polarization of >95.2% and a wall-plug efficiency of 56.23% at an injection current of 10 A. This performance stems from the synergistic co-optimization of a tensile-strained GaAsP quantum well and the P-side cladding and contact layers. A hybrid genetic-algorithm–neural-network framework was employed to navigate the complex design space, reducing device evaluation time from 540 to 4 ms. Our work establishes an efficient, physically grounded design paradigm for polarization-sensitive lasers critical in atomic physics and quantum technology.
- 2 March 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (9)
>95% TM-polarized 780 nm diode laser enabled by GA–NN co-optimization of quantum states and optical states
We demonstrate a high-performance 780 nm diode laser, achieving a transverse-magnetic degree of polarization of >95.2% and a wall-plug efficiency of 56.23% at an injection current of 10 A. This performance stems from the synergistic co-optimization of a tensile-strained GaAsP quantum well and the P-side cladding and contact layers. A hybrid genetic-algorithm–neural-network framework was employed to navigate the complex design space, reducing device evaluation time from 540 to 4 ms. Our work establishes an efficient, physically grounded design paradigm for polarization-sensitive lasers critical in atomic physics and quantum technology.
- 29 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (8) , 531-534
Broad-Area Semiconductor Lasers With Low Spatial Coherence and High Continuous Output Power
Edge-emitting broad-area semiconductor laser with a laddered electrode is proposed to attain low spatial coherence while keeping high continuous output power. Key parameters of the laddered electrode were optimized by numerical simulation, and the laser was fabricated in experiment. The laser attained continuous output power of 3.6 W at 945 nm, with a divergence angle of 19.2°, and a maximum power-conversion efficiency of 44.2%. The number of incoherent spatial modes were nearly doubled by introducing the laddered electrode, and the objective speckle contrast was reduced from 26.5% to 18.3%. The laddered-electrode laser has great potential in speckle suppression of laser active imaging systems.
- 29 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (8) , 531-534
Broad-Area Semiconductor Lasers With Low Spatial Coherence and High Continuous Output Power
Edge-emitting broad-area semiconductor laser with a laddered electrode is proposed to attain low spatial coherence while keeping high continuous output power. Key parameters of the laddered electrode were optimized by numerical simulation, and the laser was fabricated in experiment. The laser attained continuous output power of 3.6 W at 945 nm, with a divergence angle of 19.2°, and a maximum power-conversion efficiency of 44.2%. The number of incoherent spatial modes were nearly doubled by introducing the laddered electrode, and the objective speckle contrast was reduced from 26.5% to 18.3%. The laddered-electrode laser has great potential in speckle suppression of laser active imaging systems.
- Open Access
High-Power 650 nm Dense Spectral Beam Combining System Based on a Compression Telescope and Imaging Module
In this thesis, a 650 nm dense spectral beam combining (DSBC) system based on a compression telescope module (CM) and an imaging module (IM) is proposed (CM&IM DSBC system). Based on twenty-two (22) 650 nm COS (Chip on Submount) single-emitters, the system successfully achieves the first high-power and non-crosstalk beam combining output in the visible red band, with a maximum beam output power of 29.984 W. Compared with the 650 nm traditional DSBC system we proposed last year, the system solves both the crosstalk problem due to its larger optical path and the beam combining power drop caused by the direct reduction in the optical path. The final output power and DSBC efficiency are improved by more than 53% and 10%, respectively. The final beam brightness is improved by nearly 30%. Compared to a COS single-emitter, the brightness increase is more than 22 times. This achievement provides a new idea for the subsequent experimental research and product development of higher-power visible red-light band DSBC systems that can be applied in the industrial field.
Open AccessHigh-Power 650 nm Dense Spectral Beam Combining System Based on a Compression Telescope and Imaging Module
In this thesis, a 650 nm dense spectral beam combining (DSBC) system based on a compression telescope module (CM) and an imaging module (IM) is proposed (CM&IM DSBC system). Based on twenty-two (22) 650 nm COS (Chip on Submount) single-emitters, the system successfully achieves the first high-power and non-crosstalk beam combining output in the visible red band, with a maximum beam output power of 29.984 W. Compared with the 650 nm traditional DSBC system we proposed last year, the system solves both the crosstalk problem due to its larger optical path and the beam combining power drop caused by the direct reduction in the optical path. The final output power and DSBC efficiency are improved by more than 53% and 10%, respectively. The final beam brightness is improved by nearly 30%. Compared to a COS single-emitter, the brightness increase is more than 22 times. This achievement provides a new idea for the subsequent experimental research and product development of higher-power visible red-light band DSBC systems that can be applied in the industrial field.
- 19 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 37 (16) , 881-884
Crosstalk Elimination Study of 650 nm Dense Spectral Beam Combining System
In this letter, we established the first crosstalk elimination DSBC experimental system based on 11 650 nm COS (Chip on Submount) single emitters. The final output beam spectral width stabilizes over 10 nm with 11 completely discrete oscillations. Compared to the previous results, the new system’s final DSBC efficiency is improved by more than 13%, and the optimization of beam quality factor in the combining direction is close to 4.6%. With the excellent beam quality and stable locked spectrum, it has the potential to be applied in fields like solid-state laser pumping, which has a rather high value.
- 19 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 37 (16) , 881-884
Crosstalk Elimination Study of 650 nm Dense Spectral Beam Combining System
In this letter, we established the first crosstalk elimination DSBC experimental system based on 11 650 nm COS (Chip on Submount) single emitters. The final output beam spectral width stabilizes over 10 nm with 11 completely discrete oscillations. Compared to the previous results, the new system’s final DSBC efficiency is improved by more than 13%, and the optimization of beam quality factor in the combining direction is close to 4.6%. With the excellent beam quality and stable locked spectrum, it has the potential to be applied in fields like solid-state laser pumping, which has a rather high value.
- 14 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 35 (16) , 858-861
Lateral Separate Confinements of Carriers and Optical Fields to Improve the Beam Quality
A step-ridge structure is investigated to achieve lateral confinements of carriers and optical fields. Compared with the standard ridge laser structure, this structure can effectively diminish the carrier accumulation effect and reduce the lateral carrier leakage. Meanwhile, a smaller net modal gain of higher-order modes can be obtained by reducing the injection width, which helps improve lateral beam quality. The step-ridge lasers with different injection widths were fabricated. Benefiting from the lateral separation confinements of the step-ridge structure, M 2 of the laser with an injection width of $30 ~\mu \text{m}$ is reduced from 13.7 to 6 and the lateral beam quality is improved by 56.2% at 6 A under the continuous wave condition, compared with the laser with an injection width of $90 ~\mu \text{m}$ . Furthermore, among all devices, the separate-confinement structure helps the device with a $30 ~\mu \text{m}$ injection width achieves the maximum power under the quasi-continuous wave operation.
- 14 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 35 (16) , 858-861
Lateral Separate Confinements of Carriers and Optical Fields to Improve the Beam Quality
A step-ridge structure is investigated to achieve lateral confinements of carriers and optical fields. Compared with the standard ridge laser structure, this structure can effectively diminish the carrier accumulation effect and reduce the lateral carrier leakage. Meanwhile, a smaller net modal gain of higher-order modes can be obtained by reducing the injection width, which helps improve lateral beam quality. The step-ridge lasers with different injection widths were fabricated. Benefiting from the lateral separation confinements of the step-ridge structure, M 2 of the laser with an injection width of $30 ~\mu \text{m}$ is reduced from 13.7 to 6 and the lateral beam quality is improved by 56.2% at 6 A under the continuous wave condition, compared with the laser with an injection width of $90 ~\mu \text{m}$ . Furthermore, among all devices, the separate-confinement structure helps the device with a $30 ~\mu \text{m}$ injection width achieves the maximum power under the quasi-continuous wave operation.
- 15 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 35 (14) , 749-752
88×nm High-Efficiency Narrow Divergence Angle Laser Diodes With Coupled Waveguide Photonic Crystal
88x nm laser diodes with coupled waveguide photonic band crystal (CPBC) are designed and fabricated. By optimizing the optical confinement factor in the lightly doped coupled waveguide, the internal loss reduces to 0.52 cm -1 . The CPBC lasers achieve maximum power conversion efficiency of 65.57% under a continuous wave (CW) mode condition at room temperature, which is the highest reported value to our knowledge at 88x nm. The corresponding vertical divergence angel is 19.8°.
- 15 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 35 (14) , 749-752
88×nm High-Efficiency Narrow Divergence Angle Laser Diodes With Coupled Waveguide Photonic Crystal
88x nm laser diodes with coupled waveguide photonic band crystal (CPBC) are designed and fabricated. By optimizing the optical confinement factor in the lightly doped coupled waveguide, the internal loss reduces to 0.52 cm -1 . The CPBC lasers achieve maximum power conversion efficiency of 65.57% under a continuous wave (CW) mode condition at room temperature, which is the highest reported value to our knowledge at 88x nm. The corresponding vertical divergence angel is 19.8°.
- Open Access
High-Power Supersymmetric Semiconductor Laser with a Narrow Linewidth
We have designed and fabricated a kind of supersymmetric slotted Fabry–Perot semiconductor laser near 1550 nm to achieve a single-mode, high-power, and narrow-linewidth operation. The structure of the laser is composed of an electrically pumped broad ridge waveguide in the middle to provide optical gain, a group of periodic slots etched near the front facet to suppress the extra longitudinal modes and achieve a narrow linewidth, and a pair of passive superpartner waveguides located on both sides to filter out the high-order lateral modes in the broad waveguide. The device measured under the temperature of 25 °C shows an output power of 113 mW, a single-lobe lateral far-field distribution with the full width at half maximum of 7.8°, a peak wavelength of 1559.7 nm with the side-mode suppression ratio of 48.5 dB, and an intrinsic linewidth of 230 kHz at the bias current of 800 mA. The device is a promising candidate for cost-effective light sources for coherent communication systems and LiDARs.
Open AccessHigh-Power Supersymmetric Semiconductor Laser with a Narrow Linewidth
We have designed and fabricated a kind of supersymmetric slotted Fabry–Perot semiconductor laser near 1550 nm to achieve a single-mode, high-power, and narrow-linewidth operation. The structure of the laser is composed of an electrically pumped broad ridge waveguide in the middle to provide optical gain, a group of periodic slots etched near the front facet to suppress the extra longitudinal modes and achieve a narrow linewidth, and a pair of passive superpartner waveguides located on both sides to filter out the high-order lateral modes in the broad waveguide. The device measured under the temperature of 25 °C shows an output power of 113 mW, a single-lobe lateral far-field distribution with the full width at half maximum of 7.8°, a peak wavelength of 1559.7 nm with the side-mode suppression ratio of 48.5 dB, and an intrinsic linewidth of 230 kHz at the bias current of 800 mA. The device is a promising candidate for cost-effective light sources for coherent communication systems and LiDARs.
- Open Access
- 5 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 15 (1) , 1-5
Transverse Photonic Crystal Mode Engineering for Broad-Area Semiconductor Lasers With Narrow-Divergence Angles
Broad-area semiconductor lasers, coupled with asymmetric transverse photonic crystals (TPCs), are designed by the effective index method and the transfer matrix method. Due to the propagation constant of the fundamental mode lying in the forbidden band of the TPCs, but those of the high-order modes lying in the allowed band of the TPCs, the fundamental mode is mainly concentrated in the active ridge waveguide, while all the high-order modes extend into the lossy TPCs on both sides of the active ridge waveguide. Therefore, the fundamental mode possesses larger optical confinement factor than those of the high-order modes, and reaches the lasing threshold more easily, which is demonstrated by the single-lobe horizontal far-field pattern of the TPC broad-area laser under an injection current of 0.3 A near the threshold. The proposed TPC broad-area laser provides a new strategy of designing broad-area semiconductor lasers with narrow divergence angles.
- 5 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 15 (1) , 1-5
Open AccessTransverse Photonic Crystal Mode Engineering for Broad-Area Semiconductor Lasers With Narrow-Divergence Angles
Broad-area semiconductor lasers, coupled with asymmetric transverse photonic crystals (TPCs), are designed by the effective index method and the transfer matrix method. Due to the propagation constant of the fundamental mode lying in the forbidden band of the TPCs, but those of the high-order modes lying in the allowed band of the TPCs, the fundamental mode is mainly concentrated in the active ridge waveguide, while all the high-order modes extend into the lossy TPCs on both sides of the active ridge waveguide. Therefore, the fundamental mode possesses larger optical confinement factor than those of the high-order modes, and reaches the lasing threshold more easily, which is demonstrated by the single-lobe horizontal far-field pattern of the TPC broad-area laser under an injection current of 0.3 A near the threshold. The proposed TPC broad-area laser provides a new strategy of designing broad-area semiconductor lasers with narrow divergence angles.
- 23 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 35 (2) , 85-88
Narrow-Linewidth Semiconductor Laser With High-Order Sidewall Gratings
We demonstrate a kind of ridge waveguide semiconductor laser with high-order sidewall gratings around 1550 nm. The ridge waveguide with 11th-order sidewall gratings is fabricated by the standard contact-types $i$ -line lithography. The fabricated device shows an output power of 44 mW at a bias current of 500 mA and a stable single-mode operation over wide ranges of current and temperature conditions. A high side-mode suppression ratio ( $\sim 59$ dB), a narrow linewidth of 63 kHz and a low relative intensity noise ( $ < -150$ dB/Hz under the frequency range from 0.03 to 20 GHz) have been demonstrated at $25^{\circ }\text{C}$ .
- 23 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 35 (2) , 85-88
Narrow-Linewidth Semiconductor Laser With High-Order Sidewall Gratings
We demonstrate a kind of ridge waveguide semiconductor laser with high-order sidewall gratings around 1550 nm. The ridge waveguide with 11th-order sidewall gratings is fabricated by the standard contact-types $i$ -line lithography. The fabricated device shows an output power of 44 mW at a bias current of 500 mA and a stable single-mode operation over wide ranges of current and temperature conditions. A high side-mode suppression ratio ( $\sim 59$ dB), a narrow linewidth of 63 kHz and a low relative intensity noise ( $ < -150$ dB/Hz under the frequency range from 0.03 to 20 GHz) have been demonstrated at $25^{\circ }\text{C}$ .
- 27 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 34 (24) , 1353-1356
A Composite Cavity for Mode Control in Broad-Area Diode Laser
A unstable cavity structure composed of the arc-shaped cavity, Fabry-Perot cavity, and sidewall saw-tooth microstructure is proposed to achieve mode selection in high-power broad-area diode laser with 980nm wavelength. In this cavity, the loss difference between the higher-order modes and the fundamental mode is increased to suppress the lasing of higher-order modes. The lateral divergence is reduced by about 28%. The number of modes in the near-field spot is reduced and the light intensity is concentrated towards the center of the Near-field profile. Also, the lateral beam parameter product decreases by 15%.
- 27 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 34 (24) , 1353-1356
A Composite Cavity for Mode Control in Broad-Area Diode Laser
A unstable cavity structure composed of the arc-shaped cavity, Fabry-Perot cavity, and sidewall saw-tooth microstructure is proposed to achieve mode selection in high-power broad-area diode laser with 980nm wavelength. In this cavity, the loss difference between the higher-order modes and the fundamental mode is increased to suppress the lasing of higher-order modes. The lateral divergence is reduced by about 28%. The number of modes in the near-field spot is reduced and the light intensity is concentrated towards the center of the Near-field profile. Also, the lateral beam parameter product decreases by 15%.