Haitao Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Haitao Liu has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Liang Hu
CRRC Zhuzhou Institute Company Ltd., Hunan, China
2 shared publications - Ling Feng
CRRC Zhuzhou Electric Locomotive Research Institute Co., Ltd., Zhuzhou 412000, China
2 shared publications - Sen Wang
CRRC Zhuzhou Electric Locomotive Research Institute Co., Ltd., Zhuzhou 412000, China
2 shared publications - Yue Wang
CRRC Zhuzhou Electric Locomotive Research Institute Co., Ltd., Zhuzhou 412000, China
2 shared publications - Cheng Li
CRRC Zhuzhou Electric Locomotive Research Institute Co., Ltd., Zhuzhou 412001, China
1 shared publication - Lei Jia
Center for More-Electric-Aircraft Power System,College of Automation Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, Jiangsu China 210016
1 shared publication
Latest Publications
- Open Access
Correction: Liu et al. Junction Temperature Control of a Traction Inverter Based on Three-Level Active Neutral Point-Clamping. Energies 2025, 18, 2241
The authors wish to make the following corrections to this paper
Open AccessCorrection: Liu et al. Junction Temperature Control of a Traction Inverter Based on Three-Level Active Neutral Point-Clamping. Energies 2025, 18, 2241
The authors wish to make the following corrections to this paper
- Open Access
Junction Temperature Control of a Traction Inverter Based on Three-Level Active Neutral Point-Clamping
In this study, we propose an active junction temperature control method specifically tailored for traction inverters based on active neutral point-clamped (ANPC) three-level topology. This approach not only enables real-time junction temperature equalization across switching devices, but also minimizes switching losses while preserving synchronous modulation. The methodology begins with a detailed formulation of the loss quantification model for ANPC inverters, establishing the relationship between predicted losses and switching vectors. Building on this foundation, we develop a loss equalization modulation control strategy featuring closed-loop loss control. The effectiveness and practicality of the proposed control method are rigorously validated using simulations and low-power experimental testing, demonstrating its potential to enhance both the reliability and efficiency of traction inverters.
Open AccessJunction Temperature Control of a Traction Inverter Based on Three-Level Active Neutral Point-Clamping
In this study, we propose an active junction temperature control method specifically tailored for traction inverters based on active neutral point-clamped (ANPC) three-level topology. This approach not only enables real-time junction temperature equalization across switching devices, but also minimizes switching losses while preserving synchronous modulation. The methodology begins with a detailed formulation of the loss quantification model for ANPC inverters, establishing the relationship between predicted losses and switching vectors. Building on this foundation, we develop a loss equalization modulation control strategy featuring closed-loop loss control. The effectiveness and practicality of the proposed control method are rigorously validated using simulations and low-power experimental testing, demonstrating its potential to enhance both the reliability and efficiency of traction inverters.
- Open Access
A Detection and Tracking Method Based on Heterogeneous Multi-Sensor Fusion for Unmanned Mining Trucks
There exist many difficulties in environmental perception in transportation at open-pit mines, such as unpaved roads, dusty environments, and high requirements for the detection and tracking stability of small irregular obstacles. In order to solve the above problems, a new multi-target detection and tracking method is proposed based on the fusion of Lidar and millimeter-wave radar. It advances a secondary segmentation algorithm suitable for open-pit mine production scenarios to improve the detection distance and accuracy of small irregular obstacles on unpaved roads. In addition, the paper also proposes an adaptive heterogeneous multi-source fusion strategy of filtering dust, which can significantly improve the detection and tracking ability of the perception system for various targets in the dust environment by adaptively adjusting the confidence of the output target. Finally, the test results in the open-pit mine show that the method can stably detect obstacles with a size of 30–40 cm at 60 m in front of the mining truck, and effectively filter out false alarms of concentration dust, which proves the reliability of the method.
Open AccessA Detection and Tracking Method Based on Heterogeneous Multi-Sensor Fusion for Unmanned Mining Trucks
There exist many difficulties in environmental perception in transportation at open-pit mines, such as unpaved roads, dusty environments, and high requirements for the detection and tracking stability of small irregular obstacles. In order to solve the above problems, a new multi-target detection and tracking method is proposed based on the fusion of Lidar and millimeter-wave radar. It advances a secondary segmentation algorithm suitable for open-pit mine production scenarios to improve the detection distance and accuracy of small irregular obstacles on unpaved roads. In addition, the paper also proposes an adaptive heterogeneous multi-source fusion strategy of filtering dust, which can significantly improve the detection and tracking ability of the perception system for various targets in the dust environment by adaptively adjusting the confidence of the output target. Finally, the test results in the open-pit mine show that the method can stably detect obstacles with a size of 30–40 cm at 60 m in front of the mining truck, and effectively filter out false alarms of concentration dust, which proves the reliability of the method.
- 5 March 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (1) , 247-262
Optimized Design of the Neutral Inductor and Filter Inductors in Three-Phase Four-Wire Inverter With Split DC-Link Capacitors
The three-phase four-wire inverter with split dc-link capacitors can supply unbalanced loads. For the purpose of reducing the filter inductors, a neutral inductor could be introduced into the neutral line. This paper analyzes the operation principle of three-phase four-wire inverter with split dc-link capacitors when a neutral inductor is introduced. It is illustrated that the neutral inductor can reduce the zero-sequence switching harmonics in the voltages between the phase-leg midpoints and the output neutral point, thus the filter inductors can be reduced. The optimized design of the neutral inductor and filter inductors is proposed with the considerations of the inductor current ripple, the ability of supplying unbalanced loads and the total energy stored in the inductors. The equivalent circuits of the three-phase four-wire inverter with split dc-link capacitors and neutral inductor is derived in the α–β–0 frame, and the zero-axis voltage regulator is modified to suppress the third-order harmonic in the zero-sequence current caused by the dead time of the drive signals for the power switches. Finally, the experimental results from a 9-kVA prototype are provided to prove the effectiveness of the proposed optimized design of the neutral inductor and filter inductors and the control strategy of the inverter.
- 5 March 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (1) , 247-262
Optimized Design of the Neutral Inductor and Filter Inductors in Three-Phase Four-Wire Inverter With Split DC-Link Capacitors
The three-phase four-wire inverter with split dc-link capacitors can supply unbalanced loads. For the purpose of reducing the filter inductors, a neutral inductor could be introduced into the neutral line. This paper analyzes the operation principle of three-phase four-wire inverter with split dc-link capacitors when a neutral inductor is introduced. It is illustrated that the neutral inductor can reduce the zero-sequence switching harmonics in the voltages between the phase-leg midpoints and the output neutral point, thus the filter inductors can be reduced. The optimized design of the neutral inductor and filter inductors is proposed with the considerations of the inductor current ripple, the ability of supplying unbalanced loads and the total energy stored in the inductors. The equivalent circuits of the three-phase four-wire inverter with split dc-link capacitors and neutral inductor is derived in the α–β–0 frame, and the zero-axis voltage regulator is modified to suppress the third-order harmonic in the zero-sequence current caused by the dead time of the drive signals for the power switches. Finally, the experimental results from a 9-kVA prototype are provided to prove the effectiveness of the proposed optimized design of the neutral inductor and filter inductors and the control strategy of the inverter.