PTPlaton G. Tulupov

Platon G. Tulupov

*This is an algorithmically generated author record based on publicly available information.

Platon G. Tulupov has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Study of an Improved Algorithm for Automatic Control of Electrical Modes of a Ladle Furnace Unit

    by Aleksandr A. Nikolaev, Platon G. Tulupov, Sergey S. Ryzhevol, Mikhail V. Bulanov

    Problem Statement (Relevance). Modern electrometallurgy is one of the most promising sectors of the domestic metallurgical industry. Due to their superior technical and economic performance compared to other steelmaking methods, electric steelmaking systems based on electric arc furnaces (EAF) and ladle furnaces (LF) are becoming increasingly widespread. Currently, the vast majority of LFU electrical control systems do not adapt their electrical operating modes to the conditions of inert gas purging into the melt or slag conditions, resulting in suboptimal operation and increased operating costs. Therefore, the development of improved algorithms for automatic electrical modes control that will compensate for this shortcoming is particularly relevant. Objectives. The research is aimed at developing and evaluating the effectiveness of the new algorithm for the LF electrical mode control, which will ensure adaptation of the electrical operating mode of the unit to constantly changing purging and slag modes using information on the harmonic composition of electric arc currents. Methods Applied. The work was performed using statistical and theoretical analysis, mathematical modeling, and experimental studies at an operating production facility. Originality. It lies in the fact that the improved control system for the electrical mode of the LF uses an analysis of the harmonic composition of arc currents to adapt the electrical mode to the purging and slag modes. Result. A fundamentally new algorithm for the LF electrical mode control with adaptation to the technological conditions of the melting process has been developed. Practical Relevance. The use of the developed algorithm allows for a reduction in the specific energy consumption during the melting process, which in turn will ensure a reduction in the cost of the final product.


  • Open Access

    DEVELOPMENT OF AN IMPROVED ALGORITHM FOR OPTIMAL CONTROL OF ELECTRICAL MODES FOR A LADLE-FURNACE BY USING A DIGITAL TWIN

    by Nosov Magnitogorsk State Technical University, A.A. Nikolaev, P.G. Tulupov, S.S. Ryzhevol, M.V. Bulanov

    Within the framework of the article, a new algorithm for automatically switching of operating curves and on-load tap-changer stages in a ladle furnace is considered, depending on the level of the slag coefficient. A problem is formulated related to the complexity of determining the control parameter settings for various slag modes and blowing modes modes. As a solution to this problem, it is proposed to use a digital twin, which allows to calculate the most optimal combination of control settings for three phases. Upon completion of the calculation, the new setpoint values are transferred directly to the automatic control system for the electrical mode of the LF and are used for further operation of the unit. In conclusion, the results of the implementation of a new algorithm on the existing LF operating at one of the domestic metallurgical enterprises are presented. В рамках статьи рассмотрен усовершенствованный алгоритм оптимального управления электрическими режимами установки ковш-печь (УКП) с использованием информации о гармоническом составе токов дуг и применением цифрового двойника. Сформулирована проблема, связанная со сложностью определения уставок регулирования параметра вторичного электрического контура УКП для различных шлаковых режимов и режимов донной продувки. В качестве решения данной проблемы предложено использование цифрового двойника, который позволяет выполнить расчет наиболее оптимального сочетания уставок регулирования по трем фазам, которые передаются непосредственно в систему автоматического управления электрическим режимом УКП и используются при дальнейшей работе агрегата. В заключении приведены результаты испытания нового алгоритма на действующем УКП, функционирующем на одном из отечественных металлургических предприятий.


  • Open Access

    DEVELOPING THE METHOD OF OPTIMAL SETTINGS OF A NONLINEAR IMPEDANCE CONTROLLER OF ARC STEEL MELTING FURNACE

    by Nosov Magnitogorsk State Technical University, A.A. Nikolaev, P.G. Tulupov, V.S. Ivekeev, S.S. Ryzhevol

    The paper proposes the methodology for choosing the optimal coefficients of a nonlinear impedance controller as part of the control system for the electric mode of an electric arc furnace (ESF). The focus of the study was an arc steel-smelting furnace of shaft type ShP-125 (85 MVA) with an ARCOS electric mode control system and a nonlinear PI impedance controller. The paper considers in detail the stages of practical application of the proposed methodology. It describes a mathematical model of the ARCOS control system with a non-linear PI impedance controller. The model was used to evaluate the current control system settings and conclude that it needs to be optimized. The developed methodology allowed for determining the new values of the coefficients of the nonlinear PI controller. They ensure the operation of the impedance control loop which is close to the technical optimum. The paper presents the results of applying the improved parameters of the ARCOS control system and the calculation of the technical effect. The scientifically based conclusions prove the effectiveness of the proposed approaches. В рамках данной статьи приведено описание методики выбора оптимальных коэффициентов нелинейного регулятора импеданса в составе системы управления электрическим режимом дуговой сталеплавильной печи (ДСП). В качестве объекта исследования была выбрана дуговая сталеплавильная печь шахтного типа ШП-125 (85 МВА) с системой управления электрическим режимом ARCOS и нелинейным ПИ-регулятором импеданса. Детально рассмотрены этапы применения предлагаемой методики на практике для выбранного объекта исследования. Разработана математическая модель системы управления ARCOS с нелинейным ПИ-регулятором импеданса, которая использовалась для оценки текущей настройки системы управления и вывода о необходимости её оптимизации. На основе разработанной методики определены новые значения коэффициентов нелинейного ПИ-регулятора, которые обеспечивают работу контура регулирования импеданса, близкую к техническому оптимуму. Приведены результаты применения усовершенствованных параметров системы управления ARCOS на объекте исследования, рассчитан технический эффект, сделаны научно-обоснованные выводы об эффективности предлагаемых подходов.

  • Open Access

    METHOD OF ESTIMATING SPECIFIC POWER CONSUMPTION AND ELECTRODE WEAR AFTER CORRECTION OF ELECTRIC MODES IN ELECTRIC ARC FURNACES

    by А. А. Николаев, В. С. Ивекеев, P.G. Tulupov, М. В. Буланов

    The paper describes an improved method for estimating the technical effect after correction of electric modes in electric arc furnaces and ladle furnaces. The main indicators of efficiency for these types of equipment are specific power consump-tion and electrode wear. The study shows that after correction of electric modes in electric arc furnaces and ladle furnaces through parameterization of electric mode control system (or implementation of new control system), estimation of these parameters may be inaccurate. This is caused by the inapplicability of direct comparison of specific power consumption and electrode wear over separate time periods, due to the impact of different technological fac-tors. In contrast with existing methodology, the improved method takes into account the impact of technological factors with unequal values over separate time samples. The new method is based on statistical and correlation analysis of electri-cal and technological characteristics for pre-warranty and post-warranty periods. The most unfavourable period for achiev-ing the technical effect is determined on the basis of average values analysis. Further estimation of the technical effect is provided in relation to the most unfavourable conditions. The proposed method may be applied for a more precise assess-ment of the efficiency of electric arc furnaces and ladle furnaces after adaptation of parameters in electric mode control sys-tem or after the replacement of a control system.


  • Optimal Adjustment Methodology for the Electric Mode Control System Non-Linear Regulator of Electric Arc Furnace

    by A. A. Nikolaev, P. G. Tulupov, S. S. Ryzhevol

    This article considers the methodology of optimal regulator coefficients selection as a part of electric mode control system of arc steelmaking furnace. An arc steel-melting furnace of shaft type SF-125 (85 MVA) with electric mode control system is selected as an object of research Ar-COS NT electric control system and a non-linear PI impedance controller. For the designated object of study the stages of application of the proposed methodology in practice are considered in detail. The mathematical model of the ArCOS NT control system with a nonlinear PI controller is described. With the help of the mathematical model the existing control system setup has been evaluated and conclusions about the necessity of its optimization have been made. New coefficient values of the non-linear PI controller, providing the controller operation in the mode close to a technical optimum, are suggested. The experimental research results of effectiveness estimation of developed methodology at operating SF-125 are presented, the technical effect is calculated, and scientifically substantiated conclusions are drawn about efficiency of suggested approaches.

  • Open Access

    DESIGN OF IMPROVED CONTROL ALGORITHMS FOR LADLE FURNACES WITH ANALYSIS OF ELECTRIC ARC CURRENT HARMONIC COMPOSITION

    by А. А. Николаев, В. С. Ивекеев, П. Г. Тулупов, S.S. Ryzhevol

    The aim of this research is the design of improved control algorithms for ladle furnaces, considering arc length adaptation to different argon blow conditions and slag layer depth. The paper considers the issues of optimizing asymmetric arc burn-ing regimes, which ensure the maximum reduction in radiation and an increase in thermal efficiency in phases located near the liquid metal mirror during bottom blowing and emergency lance operation. The experimental results of liquid bath sur-face behavior in dependence from blowing intensity and slag layer depth are presented. On the basis of experimental re-sults, new algorithms of electric modes control in ladle furnaces are proposed. These algorithms allow dynamic adaptation of electric arc lengths to different argon blowing modes and slag layer depth to be provided. Applying of this algorithm al-lows the requisite conditions for improving of different quality indicators in ladle furnace to be ensured, since the correct adaptation of electric mode to varying conditions of melting has a direct con-nection with thermal efficiency of electric arcs and efficiency of equipment in general.