Alexander Arkadyevich Nikolaev
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Alexander Arkadyevich Nikolaev has a total of 97 co-authors. Here are the top co-authors by number of shared publications:
Nosov Magnitogorsk State Technical University
16 shared publications- Gennady Petrovich Kornilov
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russian Federation
11 shared publications - P. G. Tulupov8 shared publications
- Alexander S. Maklakov
Project Activity Center, Scientific Activity Sector, Moscow Polytechnic University, Bolshaya Semyonovskaya Street 38, 107023 Moscow, Russia
7 shared publications - Platon G. Tulupov
Магнитогорский государственный технический университет им. Г.И. Носова
7 shared publications - Ildar G. Gilemov
Nosov Magnitogorsk State Technical University,Automated Electric Drives and Mechatronics Department,Magnitogorsk,Russia
6 shared publications
Latest Publications
- 7 July 2026
- Published by Ore and Metals Publishing House in CIS Iron and Steel Review
- Vol. 31, 18-24
Efficiency of the improved algorithm for controlling electrical and process modes of the modular-type electric arc furnace
The paper describes the measures taken to improve energy efficiency of a 120-t modular-type electric arc furnace (EAF) and a furnace transformer with a rated capacity of 95 MVA. The first measure involved adjusting the automatic control system parameters for the electrical mode and electrode movement to reduce the static regulation error and improve dynamic performance of the control quality. The second measure was aimed at developing and studying an algorithm for automatic switching of the furnace transformer tap positions and operating curves using separate melting profiles for combinations of weight of the solid charge and hot metal. Upon implementation of these measures, we have assessed how they influenced the resulting energy efficiency of the EAF, and drawn the conclusions that the developed algorithms are universal and can be implemented on other modular-type arc steelmaking furnaces of different capacities. The research was funded by the Ministry of Science and Higher Education of the Russian Federation (project No. FZRU-2023-0008).
- 7 July 2026
- Published by Ore and Metals Publishing House in CIS Iron and Steel Review
- Vol. 31, 18-24
Efficiency of the improved algorithm for controlling electrical and process modes of the modular-type electric arc furnace
The paper describes the measures taken to improve energy efficiency of a 120-t modular-type electric arc furnace (EAF) and a furnace transformer with a rated capacity of 95 MVA. The first measure involved adjusting the automatic control system parameters for the electrical mode and electrode movement to reduce the static regulation error and improve dynamic performance of the control quality. The second measure was aimed at developing and studying an algorithm for automatic switching of the furnace transformer tap positions and operating curves using separate melting profiles for combinations of weight of the solid charge and hot metal. Upon implementation of these measures, we have assessed how they influenced the resulting energy efficiency of the EAF, and drawn the conclusions that the developed algorithms are universal and can be implemented on other modular-type arc steelmaking furnaces of different capacities. The research was funded by the Ministry of Science and Higher Education of the Russian Federation (project No. FZRU-2023-0008).
- 25 December 2025
- Published by Nosov Magnitogorsk State Technical University in Vestnik of Nosov Magnitogorsk State Technical University
- Vol. 23 (4)
Study of an Improved Algorithm for Automatic Control of Electrical Modes of a Ladle Furnace Unit
Problem Statement (Relevance). Modern electrometallurgy is one of the most promising sectors of the domestic metallurgical industry. Due to their superior technical and economic performance compared to other steelmaking methods, electric steelmaking systems based on electric arc furnaces (EAF) and ladle furnaces (LF) are becoming increasingly widespread. Currently, the vast majority of LFU electrical control systems do not adapt their electrical operating modes to the conditions of inert gas purging into the melt or slag conditions, resulting in suboptimal operation and increased operating costs. Therefore, the development of improved algorithms for automatic electrical modes control that will compensate for this shortcoming is particularly relevant. Objectives. The research is aimed at developing and evaluating the effectiveness of the new algorithm for the LF electrical mode control, which will ensure adaptation of the electrical operating mode of the unit to constantly changing purging and slag modes using information on the harmonic composition of electric arc currents. Methods Applied. The work was performed using statistical and theoretical analysis, mathematical modeling, and experimental studies at an operating production facility. Originality. It lies in the fact that the improved control system for the electrical mode of the LF uses an analysis of the harmonic composition of arc currents to adapt the electrical mode to the purging and slag modes. Result. A fundamentally new algorithm for the LF electrical mode control with adaptation to the technological conditions of the melting process has been developed. Practical Relevance. The use of the developed algorithm allows for a reduction in the specific energy consumption during the melting process, which in turn will ensure a reduction in the cost of the final product.
- 25 December 2025
- Published by Nosov Magnitogorsk State Technical University in Vestnik of Nosov Magnitogorsk State Technical University
- Vol. 23 (4)
Study of an Improved Algorithm for Automatic Control of Electrical Modes of a Ladle Furnace Unit
Problem Statement (Relevance). Modern electrometallurgy is one of the most promising sectors of the domestic metallurgical industry. Due to their superior technical and economic performance compared to other steelmaking methods, electric steelmaking systems based on electric arc furnaces (EAF) and ladle furnaces (LF) are becoming increasingly widespread. Currently, the vast majority of LFU electrical control systems do not adapt their electrical operating modes to the conditions of inert gas purging into the melt or slag conditions, resulting in suboptimal operation and increased operating costs. Therefore, the development of improved algorithms for automatic electrical modes control that will compensate for this shortcoming is particularly relevant. Objectives. The research is aimed at developing and evaluating the effectiveness of the new algorithm for the LF electrical mode control, which will ensure adaptation of the electrical operating mode of the unit to constantly changing purging and slag modes using information on the harmonic composition of electric arc currents. Methods Applied. The work was performed using statistical and theoretical analysis, mathematical modeling, and experimental studies at an operating production facility. Originality. It lies in the fact that the improved control system for the electrical mode of the LF uses an analysis of the harmonic composition of arc currents to adapt the electrical mode to the purging and slag modes. Result. A fundamentally new algorithm for the LF electrical mode control with adaptation to the technological conditions of the melting process has been developed. Practical Relevance. The use of the developed algorithm allows for a reduction in the specific energy consumption during the melting process, which in turn will ensure a reduction in the cost of the final product.
- Open Access
- 30 June 2025
- Published by Nosov Magnitogorsk State Technical University in Electrotechnical Systems and Complexes
- No. 2(67)
Electromagnetic Compatibility Comparative Analysis of Powerful DC and AC Electric Drives with Supply Network
- 30 June 2025
- Published by Nosov Magnitogorsk State Technical University in Electrotechnical Systems and Complexes
- No. 2(67)
Open AccessElectromagnetic Compatibility Comparative Analysis of Powerful DC and AC Electric Drives with Supply Network
- 2 February 2025
- Published by Springer Nature
- p. 233-241
Development of Improved Electric Arc Model in Vacuum Circuit Breaker for Simulation Switching Overvoltages
- 2 February 2025
- Published by Springer Nature
- p. 233-241
Development of Improved Electric Arc Model in Vacuum Circuit Breaker for Simulation Switching Overvoltages
- Open Access
- 1 January 2025
- Published by FSAEIHE South Ural State University (National Research University) in Bulletin of the South Ural State University Series "Power Engineering"
- Vol. 25 (3) , 58-67
STUDYING THE IMPACT OF THE OPERATING MODES OF THE LADLE FURNACE INSTALLATION ON THE HARMONIC COMPOSITION OF ELECTRIC ARC CURRENTS
The article is aimed at improving the energy efficiency of electric steel melting complexes by optimizing the control algorithms in ladle-furnace (LF) installations. The set of conducted research revealed the mechanism of the impact of technology factors on the harmonic composition of arc currents. Therefore, the article evaluates the impact of slag layer thickness and peculiar features of liquid metal distribution under the influence of argon purging. The research findings show that stable electric arching is ensured by a sufficient slag layer, which prevents overheating of the lining, steel ladle and vault, as well as reduces heat energy losses. The authors develop advanced algorithms for the automatic control of electrical LF modes, which allow correcting the arc length and working voltage depending on the current arching conditions. The use of the developed algorithm improves arching stability, increases the overall efficiency, and reduces specific power consumption. The practical significance of the work consists in the wide applicability of the developed technical solutions at iron works with electric steel melting and converter shops exploiting highpower LFs. Статья посвящена исследованиям, направленным на повы-шение энергоэффективности электросталеплавильных комплексов путем оптимизации алгоритмов управления в установках ковш-печь (УКП). Комплекс проведенных исследовательских работ выявил механизм влияния технологических факторов на гармонический состав токов дуг, в связи с чем особое внимание уделено оценке влияния толщины шлакового слоя и особенностям распределения жидкого металла под действием аргонной продувки. Результаты исследований показывают, что устойчивое горение электрических дуг обеспечивается достаточным слоем шлака, предотвращающего перегрев футеровки, сталь-ковша и свода, а также снижающего потери тепловой энергии. Разработаны усовершенствованные алгоритмы автоматического управления электрическими режимами УКП, позволяющие корректировать длину дуг и рабочее напряжение в зависимости от текущих условий горения дуг. Применение разработанного алгоритма обеспечивает улучшение стабильности горения дуг, повышение общего КПД и снижение удельного расхода электроэнергии. Практическая зна-чимость работы состоит в возможности широкого применения разработанных технических решений на предприятиях черной металлургии с электросталеплавильными и конвертерными цехами, где функционируют мощные УКП.
- 1 January 2025
- Published by FSAEIHE South Ural State University (National Research University) in Bulletin of the South Ural State University Series "Power Engineering"
- Vol. 25 (3) , 58-67
Open AccessSTUDYING THE IMPACT OF THE OPERATING MODES OF THE LADLE FURNACE INSTALLATION ON THE HARMONIC COMPOSITION OF ELECTRIC ARC CURRENTS
The article is aimed at improving the energy efficiency of electric steel melting complexes by optimizing the control algorithms in ladle-furnace (LF) installations. The set of conducted research revealed the mechanism of the impact of technology factors on the harmonic composition of arc currents. Therefore, the article evaluates the impact of slag layer thickness and peculiar features of liquid metal distribution under the influence of argon purging. The research findings show that stable electric arching is ensured by a sufficient slag layer, which prevents overheating of the lining, steel ladle and vault, as well as reduces heat energy losses. The authors develop advanced algorithms for the automatic control of electrical LF modes, which allow correcting the arc length and working voltage depending on the current arching conditions. The use of the developed algorithm improves arching stability, increases the overall efficiency, and reduces specific power consumption. The practical significance of the work consists in the wide applicability of the developed technical solutions at iron works with electric steel melting and converter shops exploiting highpower LFs. Статья посвящена исследованиям, направленным на повы-шение энергоэффективности электросталеплавильных комплексов путем оптимизации алгоритмов управления в установках ковш-печь (УКП). Комплекс проведенных исследовательских работ выявил механизм влияния технологических факторов на гармонический состав токов дуг, в связи с чем особое внимание уделено оценке влияния толщины шлакового слоя и особенностям распределения жидкого металла под действием аргонной продувки. Результаты исследований показывают, что устойчивое горение электрических дуг обеспечивается достаточным слоем шлака, предотвращающего перегрев футеровки, сталь-ковша и свода, а также снижающего потери тепловой энергии. Разработаны усовершенствованные алгоритмы автоматического управления электрическими режимами УКП, позволяющие корректировать длину дуг и рабочее напряжение в зависимости от текущих условий горения дуг. Применение разработанного алгоритма обеспечивает улучшение стабильности горения дуг, повышение общего КПД и снижение удельного расхода электроэнергии. Практическая зна-чимость работы состоит в возможности широкого применения разработанных технических решений на предприятиях черной металлургии с электросталеплавильными и конвертерными цехами, где функционируют мощные УКП.
- 1 January 2025
- Published by Pleiades Publishing Ltd in Russian Metallurgy (Metally)
- Vol. 2025 (1) , 127-139
Improving the Efficiency of the Electrical and Technological Operation of a Modular Electric Arc Furnace
—The electrical and technological operating conditions of a DSP-120 modular electric arc furnace are analyzed. The problems associated with suboptimal furnace operation at a low power factor, lack of automation in gas-oxygen equipment, and the absence of an informative parameter characterizing the efficiency of shielding arcs by a foamed slag have been described. As a solution to these problems, we propose an improved technique for setting the electrotechnological conditions of the modular electric arc furnace, which is used to develop new optimized heat profiles. Recommendations for optimizing the injection of a carbon-containing material into the furnace using a slag coefficient calculated using the harmonic composition of the arc currents are developed. The implementation of these measures in the operating production is found to cause a technical effect in the form of reduced specific energy consumption, which is crucial for a modular electric arc furnace as an energy-intensive technological unit.
- 1 January 2025
- Published by Pleiades Publishing Ltd in Russian Metallurgy (Metally)
- Vol. 2025 (1) , 127-139
Improving the Efficiency of the Electrical and Technological Operation of a Modular Electric Arc Furnace
—The electrical and technological operating conditions of a DSP-120 modular electric arc furnace are analyzed. The problems associated with suboptimal furnace operation at a low power factor, lack of automation in gas-oxygen equipment, and the absence of an informative parameter characterizing the efficiency of shielding arcs by a foamed slag have been described. As a solution to these problems, we propose an improved technique for setting the electrotechnological conditions of the modular electric arc furnace, which is used to develop new optimized heat profiles. Recommendations for optimizing the injection of a carbon-containing material into the furnace using a slag coefficient calculated using the harmonic composition of the arc currents are developed. The implementation of these measures in the operating production is found to cause a technical effect in the form of reduced specific energy consumption, which is crucial for a modular electric arc furnace as an energy-intensive technological unit.
- 25 December 2024
- Published by Ore and Metals Publishing House in Chernye Metally
- No. 12,p. 82-88
Influence of composition and quality of electrical equipment on the EAF production efficiency
The article considers the influence of the composition and condition of the main electrical equipment of the electric arc furnace (EAF) on its productivity and trouble-free operation time. Ensuring the specified productivity and minimal losses of working time in the melting cycle are, of course, the main factors in achieving the specified production efficiency of the entire unit as a whole. A direct relationship is shown between the voltage, the stability of which is ensured by the static var compensator (SVC), and the electric power introduced into the furnace. Electric energy in the overall heat balance is on average not less than 70-85 % depending on the composition of the charge and significantly affects the duration of the melt. Operation of the furnace without SVC or in its incomplete composition accordingly significantly reduces the capacity and productivity of the furnace. To ensure trouble-free and uninterrupted operation, it is necessary to identify weak points and links in the technological chain of operations, as well as in the electrical equipment involved in these operations. The article presents statistics of failures of the main elements of the power supply system of the electric power plant for a long period of time - 15 years; special attention is paid to damage to cable lines. A discrepancy between the nominal and actual values of the voltage of cable joints is noted. Losses of two categories are calculated and presented: firstly, from interruptions in power supply as a result of damage to cable lines in various variants of joint operation of the electric power plant and the SVC, and secondly, the most significant direct losses of the electric power plant productivity in the absence or incomplete composition of the compensating device.The study was supported by the grant of the Russian Science Foundation No. 24-19-20026.
- 25 December 2024
- Published by Ore and Metals Publishing House in Chernye Metally
- No. 12,p. 82-88
Influence of composition and quality of electrical equipment on the EAF production efficiency
The article considers the influence of the composition and condition of the main electrical equipment of the electric arc furnace (EAF) on its productivity and trouble-free operation time. Ensuring the specified productivity and minimal losses of working time in the melting cycle are, of course, the main factors in achieving the specified production efficiency of the entire unit as a whole. A direct relationship is shown between the voltage, the stability of which is ensured by the static var compensator (SVC), and the electric power introduced into the furnace. Electric energy in the overall heat balance is on average not less than 70-85 % depending on the composition of the charge and significantly affects the duration of the melt. Operation of the furnace without SVC or in its incomplete composition accordingly significantly reduces the capacity and productivity of the furnace. To ensure trouble-free and uninterrupted operation, it is necessary to identify weak points and links in the technological chain of operations, as well as in the electrical equipment involved in these operations. The article presents statistics of failures of the main elements of the power supply system of the electric power plant for a long period of time - 15 years; special attention is paid to damage to cable lines. A discrepancy between the nominal and actual values of the voltage of cable joints is noted. Losses of two categories are calculated and presented: firstly, from interruptions in power supply as a result of damage to cable lines in various variants of joint operation of the electric power plant and the SVC, and secondly, the most significant direct losses of the electric power plant productivity in the absence or incomplete composition of the compensating device.The study was supported by the grant of the Russian Science Foundation No. 24-19-20026.
- 25 December 2024
- Published by Ore and Metals Publishing House in Chernye Metally
- No. 12,p. 89-95
Improving the energy performance of a ladle furnace using an improved control system for electrical modes and electrode movement
An improved control system for the electrical modes and electrodes movement of a ladlefurnace (LF) has been developed. Its distinctive feature is the use of an adaptive nonlinear PI-controller, which allows for control quality indicators in the circuit close to the technical optimum due to the linearization of the LF electrical and hydraulic circuits as control objects over the entire range of working arc lengths. The system uses a new algorithm that allows for adapting the electrical mode of the furnace to changing argon blowing conditions, which ensures stable arc burning modes in an unstable zone. The system is equipped with a digital twin of the LF, the use of which helps to solve problems of finding optimal system settings when production conditions change. The use of the new system ensures the achievement of a technical effect in the form of a decrease in the specific energy consumption, operating time under current, as well as electrode consumption relative to the operation of similar foreign-made systems presented on the modern market.The work was carried out with the financial support of the Ministry of Science and Higher Education of the Russian Federation (project No. FZRU-2023-0008).
- 25 December 2024
- Published by Ore and Metals Publishing House in Chernye Metally
- No. 12,p. 89-95
Improving the energy performance of a ladle furnace using an improved control system for electrical modes and electrode movement
An improved control system for the electrical modes and electrodes movement of a ladlefurnace (LF) has been developed. Its distinctive feature is the use of an adaptive nonlinear PI-controller, which allows for control quality indicators in the circuit close to the technical optimum due to the linearization of the LF electrical and hydraulic circuits as control objects over the entire range of working arc lengths. The system uses a new algorithm that allows for adapting the electrical mode of the furnace to changing argon blowing conditions, which ensures stable arc burning modes in an unstable zone. The system is equipped with a digital twin of the LF, the use of which helps to solve problems of finding optimal system settings when production conditions change. The use of the new system ensures the achievement of a technical effect in the form of a decrease in the specific energy consumption, operating time under current, as well as electrode consumption relative to the operation of similar foreign-made systems presented on the modern market.The work was carried out with the financial support of the Ministry of Science and Higher Education of the Russian Federation (project No. FZRU-2023-0008).